[Fri May 31 23:22:33 2013] Detection parameters:
  Position = (334.4, 351.2) = 19 14 5.50 4 58 16.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.0 +/- 19.4
  Background counts = 133.4
  Rate = 0.003 +/- 0.0008

[Fri May 31 23:22:38 2013] Off-axis axis estimate = 4.63'
[Fri May 31 23:23:28 2013] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:28 2013] Initial guess for spatial extent in simple fitting = 8.74"
[Fri May 31 23:23:28 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Fri May 31 23:23:28 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.74"
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src23.ximg exists
[Fri May 31 23:23:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src23.csv
[Fri May 31 23:23:30 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri May 31 23:23:30 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src23.csv
[Fri May 31 23:23:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:31 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri May 31 23:23:31 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri May 31 23:23:31 2013] Fit fullrun_pn_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri May 31 23:23:52 2013] Source 24 is offset by -6.548312 and 0.597011 pixels which is larger than
2 X fitted extent = 1.044230 x 1.044230, not incorporating fit results
[Fri May 31 23:23:52 2013] Warning, spatial fit 23 centroid is now closest to src. 21
[Fri May 31 23:23:52 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:52 2013] Assessing source extent using major
[Fri May 31 23:23:52 2013] Source does appear to be extended
[Fri May 31 23:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:24 2013] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:24 2013] Initial guess for spatial extent in simple fitting = 8.74"
[Fri May 31 23:24:24 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.992
[Fri May 31 23:24:24 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.74"
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 31 23:24:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src17.csv
[Fri May 31 23:24:25 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 31 23:24:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src17.csv
[Fri May 31 23:24:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:26 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 31 23:24:26 2013] fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 31 23:24:26 2013] Fit fullrun_pn_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May 31 23:24:43 2013] Warning, spatial fit 17 centroid is now closest to src. 17
[Fri May 31 23:24:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:43 2013] Assessing source extent using major
[Fri May 31 23:24:43 2013] Source does appear to be extended
[Fri May 31 23:24:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:25:14 2013] XMMSAS src. selection expression = ellipse(29046.059753, 30509.657928, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 23:25:14 2013] Not overwriting source region fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src.reg
[Fri May 31 23:25:14 2013] Extracting stamp from image fullrun_pn_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (297, 314) - (372, 389)
[Fri May 31 23:25:14 2013] XMMSAS bgd. selection expression = annulus(29046.059753, 30509.657928, 1087.500000, 2175.000000, X, Y) && !ellipse(31359.730264, 32993.678760, 518.596015, 518.596015, 0.000000, X, Y) && !ellipse(29500.860962, 31610.167572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28024.863800, 30632.447723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27928.300385, 29970.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28885.703949, 29832.832550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32699.478000, 29384.096000, 1515.672044, 1515.672044, 0.000000, X, Y) && !ellipse(27335.057983, 29396.274048, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 23:25:14 2013] Writing fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24.gif
[Fri May 31 23:25:17 2013] ../../xmm0075140401/products/events/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0075140401/products/events/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Fri May 31 23:25:18 2013] Mean detx,y = (1898.35, -3222.08) 
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/images/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src.img and ../../xmm0075140401/products/images/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/spectra/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Fri May 31 23:25:18 2013] Setting source spectrum file to fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri May 31 23:25:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri May 31 23:25:18 2013] ../../xmm0075140401/products/lightcurves/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Fri May 31 23:56:04 2013] Not generating rmf since there are only 83 counts
[Fri May 31 23:56:04 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:25:24 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:24 2013] Total counts from fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1317.00
[Sat Jun  1 00:25:24 2013] Total counts from fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_bgd.pi.gz = 3223.00
[Sat Jun  1 00:25:24 2013] Got source and background scale factors 1344000.000000, 5271897.000000
[Sat Jun  1 00:25:24 2013] User source parameters:
  Position = (334.4, 351.2) = 19 14 5.50 4 58 16.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 495.3 +/- 37.3
  Background aperture counts = 821.7
  Rate = 0.02 +/- 0.001

[Sat Jun  1 00:25:24 2013] Updating counts from extracted products
[Sat Jun  1 00:25:24 2013] Set source signif. to 495.34/28.66 = 17.28
[Sat Jun  1 00:25:33 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:33 2013] Using photon index=1.80, rate=0.0162, arf fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24.arf
[Sat Jun  1 00:25:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:33 2013] Updating source flux to 9.3e-14
[Sat Jun  1 00:26:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 00:26:14 2013] xmm0075140401/analysis//spectral/fullrun_pn_xmm0075140401_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete