[Fri May 31 23:22:43 2013] Detection parameters:
  Position = (308.6, 283.2) = 19 14 13.01 4 53 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 14.3
  Background counts = 42.6
  Rate = 0.002 +/- 0.0005

[Fri May 31 23:22:44 2013] Off-axis axis estimate = 1.33'
[Fri May 31 23:23:34 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:34 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Fri May 31 23:23:34 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Fri May 31 23:23:34 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.09"
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src12.ximg exists
[Fri May 31 23:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src12.csv
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri May 31 23:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src12.csv
[Fri May 31 23:23:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:36 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri May 31 23:23:36 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May 31 23:23:36 2013] Fit fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri May 31 23:24:07 2013] Spatial fit model total counts = 702.713000, observed total counts = 704.000000
[Fri May 31 23:24:07 2013] Offset between fit and detection position for source 31 = 2.212510 pixels
[Fri May 31 23:24:07 2013] 716.054700 total counts/ 643.812000 bgd. counts: snr = 2.847177
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.212510 pixels
  Position = (306.4, 282.9) = 19 14 13.65 4 53 14.6
  Extent = 10.1 (5.3-14.2)", rotation angle = 0
  Source counts = 72.2 +/- 26.8
  Background counts = 643.8
  Rate = 0.002 +/- 0.0008
[Fri May 31 23:24:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:07 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:24:07 2013] Source does appear to be extended
[Fri May 31 23:24:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:07 2013] Source is confused with source 27
[Fri May 31 23:24:28 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:28 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Fri May 31 23:24:28 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.937
[Fri May 31 23:24:28 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.13"
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src10.csv
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src10.csv
[Fri May 31 23:24:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 31 23:24:29 2013] Fit fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May 31 23:24:58 2013] Warning, spatial fit 10 centroid is now closest to src. 27
[Fri May 31 23:24:58 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:58 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:24:58 2013] Source does appear to be extended
[Fri May 31 23:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:24:32 2013] XMMSAS src. selection expression = ellipse(26612.353600, 24565.790000, 607.962017, 607.962017, 0.000000, X, Y)
[Sat Jun  1 00:24:32 2013] Not overwriting source region fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun  1 00:24:32 2013] Extracting stamp from image fullrun_mos2_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (272, 248) - (341, 318)
[Sat Jun  1 00:24:32 2013] XMMSAS bgd. selection expression = annulus(26612.353600, 24565.790000, 1013.270029, 2026.540058, X, Y) && !ellipse(27922.007965, 26590.640869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27992.066223, 27139.246918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26832.965393, 26129.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27142.815277, 27194.774200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26842.770000, 24835.748000, 1367.224039, 1367.224039, 0.000000, X, Y)
[Sat Jun  1 00:24:32 2013] Writing fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31.gif
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/events/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0075140401/products/events/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sat Jun  1 00:24:33 2013] Mean detx,y = (427.28, -2902.40) 
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/images/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src.img and ../../xmm0075140401/products/images/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/spectra/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sat Jun  1 00:24:33 2013] Setting source spectrum file to fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun  1 00:24:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/lightcurves/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sat Jun  1 00:24:39 2013] Not generating rmf since there are only 72 counts
[Sat Jun  1 00:24:39 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:24:39 2013] fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Sat Jun  1 00:25:42 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:43 2013] Total counts from fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 434.00
[Sat Jun  1 00:25:43 2013] Total counts from fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1540.00
[Sat Jun  1 00:25:43 2013] Got source and background scale factors 1161600.000000, 6056896.000000
[Sat Jun  1 00:25:43 2013] User source parameters:
  Position = (306.4, 282.9) = 19 14 13.65 4 53 14.6
  Extent = 10.1 (5.3-14.2)", rotation angle = 0
  Source aperture counts = 138.7 +/- 21.9
  Background aperture counts = 295.3
  Rate = 0.004 +/- 0.0007

[Sat Jun  1 00:25:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:46 2013] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31.arf
[Sat Jun  1 00:25:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:46 2013] Updating source flux to 3.1e-14
[Sat Jun  1 00:25:53 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Sat Jun  1 00:25:53 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 00:26:02 2013] xmm0075140401/analysis//spectral/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete