[Fri May 31 23:22:43 2013] Detection parameters:
  Position = (321.5, 306.2) = 19 14 9.27 4 54 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 13.1
  Background counts = 48.4
  Rate = 0.002 +/- 0.0005

[Fri May 31 23:22:44 2013] Off-axis axis estimate = 1.76'
[Fri May 31 23:23:34 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:34 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Fri May 31 23:23:34 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.631
[Fri May 31 23:23:34 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.31"
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src14.ximg exists
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src14_1.ximg exists
[Fri May 31 23:23:35 2013] Fit fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src14 appears to have run properly
[Fri May 31 23:23:36 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Fri May 31 23:23:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 31 23:23:36 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May 31 23:23:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Fri May 31 23:23:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:07 2013] Source 23 is offset by -6.166552 and 5.432930 pixels which is larger than
2 X fitted extent = 0.840308 x 2.429444, not incorporating fit results
[Fri May 31 23:24:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:07 2013] Assessing source extent using major
[Fri May 31 23:24:07 2013] Source does appear to be extended
[Fri May 31 23:24:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:07 2013] Source is confused with source 21
[Fri May 31 23:24:28 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:28 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Fri May 31 23:24:28 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.631
[Fri May 31 23:24:28 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.31"
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src12.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src12.csv
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src12.csv
[Fri May 31 23:24:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May 31 23:24:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:58 2013] Source 23 is offset by 6.316597 and -0.448473 pixels which is larger than
2 X fitted extent = 0.727062 x 0.727062, not incorporating fit results
[Fri May 31 23:24:58 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:58 2013] Assessing source extent using major
[Fri May 31 23:24:58 2013] Source does appear to be extended
[Fri May 31 23:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:24:32 2013] XMMSAS src. selection expression = ellipse(27922.007965, 26590.640869, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 00:24:32 2013] Not overwriting source region fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src.reg
[Sat Jun  1 00:24:32 2013] Extracting stamp from image fullrun_mos2_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (284, 269) - (359, 344)
[Sat Jun  1 00:24:32 2013] XMMSAS bgd. selection expression = annulus(27922.007965, 26590.640869, 1087.500000, 2175.000000, X, Y) && !ellipse(27095.026594, 29208.575800, 600.312817, 600.312817, 0.000000, X, Y) && !ellipse(27958.596924, 28320.092438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26612.353600, 24565.790000, 810.616023, 810.616023, 0.000000, X, Y) && !ellipse(27992.066223, 27139.246918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26832.965393, 26129.693268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.886414, 29570.866119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27142.815277, 27194.774200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28232.274689, 28985.904755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26842.770000, 24835.748000, 1367.224039, 1367.224039, 0.000000, X, Y)
[Sat Jun  1 00:24:32 2013] Writing fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23.gif
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/events/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0075140401/products/events/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sat Jun  1 00:24:33 2013] Mean detx,y = (-768.58, -862.39) 
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/images/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src.img and ../../xmm0075140401/products/images/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/spectra/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sat Jun  1 00:24:33 2013] Setting source spectrum file to fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat Jun  1 00:24:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Jun  1 00:24:33 2013] ../../xmm0075140401/products/lightcurves/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sat Jun  1 00:24:39 2013] Not generating rmf since there are only 67 counts
[Sat Jun  1 00:24:39 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:24:39 2013] fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Sat Jun  1 00:25:43 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:43 2013] Total counts from fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 508.00
[Sat Jun  1 00:25:43 2013] Total counts from fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1466.00
[Sat Jun  1 00:25:43 2013] Got source and background scale factors 1148840.000000, 5349728.000000
[Sat Jun  1 00:25:43 2013] User source parameters:
  Position = (321.5, 306.2) = 19 14 9.27 4 54 53.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 193.2 +/- 23.6
  Background aperture counts = 314.8
  Rate = 0.006 +/- 0.0007

[Sat Jun  1 00:25:43 2013] Updating counts from extracted products
[Sat Jun  1 00:25:43 2013] Set source signif. to 193.18/17.74 = 10.89
[Sat Jun  1 00:25:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:46 2013] Using photon index=1.80, rate=0.00599, arf fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23.arf
[Sat Jun  1 00:25:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:46 2013] Updating source flux to 9.6e-14
[Sat Jun  1 00:25:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 00:26:02 2013] xmm0075140401/analysis//spectral/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete