[Fri May 31 23:22:42 2013] Detection parameters:
  Position = (323.7, 345.9) = 19 14 8.64 4 57 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.3 +/- 13.4
  Background counts = 42.2
  Rate = 0.003 +/- 0.0005

[Fri May 31 23:22:44 2013] Off-axis axis estimate = 3.90'
[Fri May 31 23:23:34 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:34 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Fri May 31 23:23:34 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.510
[Fri May 31 23:23:34 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 8.38"
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src6.ximg exists
[Fri May 31 23:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src6.csv
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri May 31 23:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src6.csv
[Fri May 31 23:23:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri May 31 23:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri May 31 23:23:35 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri May 31 23:23:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri May 31 23:23:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:07 2013] Warning, spatial fit 6 centroid is now closest to src. 17
[Fri May 31 23:24:07 2013] Spatial fit model total counts = 785.181000, observed total counts = 678.000000
[Fri May 31 23:24:07 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 23:24:07 2013] Source 11 is offset by -1.848761 and 4.679133 pixels which is larger than
2 X fitted extent = 0.924189 x 0.924189, not incorporating fit results
[Fri May 31 23:24:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:07 2013] Assessing source extent using major
[Fri May 31 23:24:07 2013] Source does appear to be extended
[Fri May 31 23:24:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:07 2013] Source is confused with source 10
[Fri May 31 23:24:28 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:28 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Fri May 31 23:24:28 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.510
[Fri May 31 23:24:28 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.38"
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src6.csv
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src6.csv
[Fri May 31 23:24:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 31 23:24:29 2013] fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 31 23:24:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 31 23:24:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:58 2013] Spatial fit model total counts = 832.794000, observed total counts = 736.000000
[Fri May 31 23:24:58 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 23:24:58 2013] Source 11 is offset by -1.853326 and 4.694443 pixels which is larger than
2 X fitted extent = 0.929522 x 0.929522, not incorporating fit results
[Fri May 31 23:24:58 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:58 2013] Assessing source extent using major
[Fri May 31 23:24:58 2013] Source does appear to be extended
[Fri May 31 23:24:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:24:32 2013] XMMSAS src. selection expression = ellipse(28109.490204, 30048.354553, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 00:24:32 2013] Not overwriting source region fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun  1 00:24:32 2013] Extracting stamp from image fullrun_mos2_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (286, 308) - (361, 383)
[Sat Jun  1 00:24:32 2013] XMMSAS bgd. selection expression = annulus(28109.490204, 30048.354553, 1087.500000, 2175.000000, X, Y) && !ellipse(27095.026594, 29208.575800, 600.312817, 600.312817, 0.000000, X, Y) && !ellipse(27958.596924, 28320.092438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28408.595184, 30581.349030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27992.066223, 27139.246918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.886414, 29570.866119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27142.815277, 27194.774200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28232.274689, 28985.904755, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 00:24:32 2013] Writing fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11.gif
[Sat Jun  1 00:24:32 2013] ../../xmm0075140401/products/events/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0075140401/products/events/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Jun  1 00:24:32 2013] Mean detx,y = (-870.25, 2578.32) 
[Sat Jun  1 00:24:32 2013] ../../xmm0075140401/products/images/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src.img and ../../xmm0075140401/products/images/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Jun  1 00:24:32 2013] ../../xmm0075140401/products/spectra/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Jun  1 00:24:32 2013] Setting source spectrum file to fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun  1 00:24:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun  1 00:24:32 2013] ../../xmm0075140401/products/lightcurves/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Jun  1 00:24:39 2013] Not generating rmf since there are only 84 counts
[Sat Jun  1 00:24:39 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:24:39 2013] fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Sat Jun  1 00:25:42 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:42 2013] Total counts from fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 510.00
[Sat Jun  1 00:25:42 2013] Total counts from fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1815.00
[Sat Jun  1 00:25:42 2013] Got source and background scale factors 1126428.000000, 6500664.000000
[Sat Jun  1 00:25:42 2013] User source parameters:
  Position = (323.7, 345.9) = 19 14 8.64 4 57 49.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 195.5 +/- 23.6
  Background aperture counts = 314.5
  Rate = 0.006 +/- 0.0007

[Sat Jun  1 00:25:42 2013] Updating counts from extracted products
[Sat Jun  1 00:25:42 2013] Set source signif. to 195.50/17.73 = 11.02
[Sat Jun  1 00:25:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:46 2013] Using photon index=1.80, rate=0.00606, arf fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11.arf
[Sat Jun  1 00:25:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:46 2013] Updating source flux to 1e-13
[Sat Jun  1 00:25:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 00:26:02 2013] xmm0075140401/analysis//spectral/fullrun_mos2_xmm0075140401_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete