[Fri May 31 23:22:40 2013] Detection parameters:
  Position = (299.8, 270.3) = 19 14 15.59 4 52 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.1 +/- 12.0
  Background counts = 38.0
  Rate = 0.002 +/- 0.0004

[Fri May 31 23:22:40 2013] Off-axis axis estimate = 2.04'
[Fri May 31 23:23:32 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:32 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Fri May 31 23:23:32 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Fri May 31 23:23:32 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 7.45"
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src23.ximg exists
[Fri May 31 23:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src23.csv
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri May 31 23:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src23.csv
[Fri May 31 23:23:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri May 31 23:23:34 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri May 31 23:23:59 2013] Source 27 is offset by 7.614381 and -5.011868 pixels which is larger than
2 X fitted extent = 0.856248 x 0.856248, not incorporating fit results
[Fri May 31 23:23:59 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:59 2013] Assessing source extent using major
[Fri May 31 23:23:59 2013] Source does appear to be extended
[Fri May 31 23:23:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:26 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:26 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Fri May 31 23:24:26 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.021
[Fri May 31 23:24:26 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.45"
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src20.ximg exists
[Fri May 31 23:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src20.csv
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri May 31 23:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src20.csv
[Fri May 31 23:24:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:28 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri May 31 23:24:28 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri May 31 23:24:28 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri May 31 23:24:51 2013] Spatial fit model total counts = 512.001000, observed total counts = 512.000000
[Fri May 31 23:24:51 2013] Offset between fit and detection position for source 27 = 0.993150 pixels
[Fri May 31 23:24:51 2013] 522.792400 total counts/ 503.834000 bgd. counts: snr = 0.844613
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.993150 pixels
  Position = (299.9, 269.3) = 19 14 15.56 4 52 15.4
  Extent = 3.3 (1.9-6.9)", rotation angle = 0
  Source counts = 19.0 +/- 22.9
  Background counts = 503.8
  Rate = 0.0006 +/- 0.0007
  Deleting source due to low Poisson probability