[Fri May 31 23:22:39 2013] Detection parameters:
  Position = (325.9, 329.0) = 19 14 7.98 4 56 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.7 +/- 15.2
  Background counts = 48.1
  Rate = 0.002 +/- 0.0005

[Fri May 31 23:22:40 2013] Off-axis axis estimate = 2.98'
[Fri May 31 23:23:32 2013] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:32 2013] Initial guess for spatial extent in simple fitting = 7.92"
[Fri May 31 23:23:32 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.743
[Fri May 31 23:23:32 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.92"
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src15.ximg exists
[Fri May 31 23:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src15.csv
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May 31 23:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src15.csv
[Fri May 31 23:23:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 31 23:23:34 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri May 31 23:23:59 2013] Spatial fit model total counts = 826.885000, observed total counts = 855.000000
[Fri May 31 23:23:59 2013] Offset between fit and detection position for source 18 = 0.747307 pixels
[Fri May 31 23:23:59 2013] 771.022500 total counts/ 673.083000 bgd. counts: snr = 3.775058
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.747307 pixels
  Position = (326.6, 329.2) = 19 14 7.78 4 56 36.0
  Extent = 12.4 (7.4-15.8)", rotation angle = 0
  Source counts = 97.9 +/- 27.8
  Background counts = 673.1
  Rate = 0.003 +/- 0.0009
[Fri May 31 23:23:59 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:59 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:23:59 2013] Source does appear to be extended
[Fri May 31 23:23:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:23:59 2013] Source is confused with source 19
[Fri May 31 23:24:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 23:24:26 2013] Initial guess for spatial extent in simple fitting = 12.37"
[Fri May 31 23:24:26 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.095
[Fri May 31 23:24:26 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 12.37"
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src12.ximg exists
[Fri May 31 23:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src12.csv
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May 31 23:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src12.csv
[Fri May 31 23:24:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May 31 23:24:27 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri May 31 23:24:51 2013] Warning, spatial fit 12 centroid is now closest to src. 19
[Fri May 31 23:24:51 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:51 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:24:51 2013] Source does appear to be extended
[Fri May 31 23:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:24:24 2013] XMMSAS src. selection expression = ellipse(28367.336400, 28594.323600, 742.476021, 742.476021, 0.000000, X, Y)
[Sat Jun  1 00:24:24 2013] Not overwriting source region fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun  1 00:24:24 2013] Extracting stamp from image fullrun_mos1_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (284, 287) - (369, 372)
[Sat Jun  1 00:24:24 2013] XMMSAS bgd. selection expression = annulus(28367.336400, 28594.323600, 1237.460036, 2474.920071, X, Y) && !ellipse(28267.196289, 29962.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.184000, 28443.631200, 1979.936057, 1979.936057, 0.000000, X, Y) && !ellipse(27698.579285, 28728.478424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.036316, 29539.789001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.438000, 30438.511000, 1364.256039, 1364.256039, 0.000000, X, Y) && !ellipse(27943.775200, 27516.900800, 704.160020, 704.160020, 0.000000, X, Y) && !ellipse(28742.948334, 30057.896729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28021.704315, 31761.698059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.219604, 27096.639008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.106110, 30475.389465, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 00:24:24 2013] Writing fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18.gif
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/events/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0075140401/products/events/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat Jun  1 00:24:25 2013] Mean detx,y = (1356.59, 923.71) 
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/images/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src.img and ../../xmm0075140401/products/images/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/spectra/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat Jun  1 00:24:25 2013] Setting source spectrum file to fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jun  1 00:24:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/lightcurves/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat Jun  1 00:24:32 2013] Not generating rmf since there are only 97 counts
[Sat Jun  1 00:24:32 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:24:32 2013] fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Sat Jun  1 00:25:37 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:37 2013] Total counts from fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 737.00
[Sat Jun  1 00:25:37 2013] Total counts from fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1138.00
[Sat Jun  1 00:25:37 2013] Got source and background scale factors 1668200.000000, 4628308.000000
[Sat Jun  1 00:25:37 2013] User source parameters:
  Position = (326.6, 329.2) = 19 14 7.78 4 56 36.0
  Extent = 12.4 (7.4-15.8)", rotation angle = 0
  Source aperture counts = 326.8 +/- 28.2
  Background aperture counts = 410.2
  Rate = 0.01 +/- 0.0009

[Sat Jun  1 00:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:40 2013] Using photon index=1.80, rate=0.00304, arf fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18.arf
[Sat Jun  1 00:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:40 2013] Updating source flux to 4.1e-14
[Sat Jun  1 00:25:50 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Sat Jun  1 00:25:50 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 00:25:53 2013] xmm0075140401/analysis//spectral/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete