[Fri May 31 23:22:39 2013] Detection parameters:
  Position = (318.7, 345.9) = 19 14 10.09 4 57 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.8 +/- 13.8
  Background counts = 40.8
  Rate = 0.002 +/- 0.0005

[Fri May 31 23:22:40 2013] Off-axis axis estimate = 3.74'
[Fri May 31 23:23:32 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:32 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Fri May 31 23:23:32 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.078
[Fri May 31 23:23:32 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.30"
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src16.ximg exists
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri May 31 23:23:33 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src16 appears to have run properly
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri May 31 23:23:34 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri May 31 23:23:59 2013] Source 14 is offset by 2.788055 and 5.679629 pixels which is larger than
2 X fitted extent = 2.414023 x 2.414023, not incorporating fit results
[Fri May 31 23:23:59 2013] Spatial fit model total counts = 714.859000, observed total counts = 717.000000
[Fri May 31 23:23:59 2013] Offset between fit and detection position for source 14 = 4.582706 pixels
[Fri May 31 23:23:59 2013] Warning, changing simple spatial fit ID from 16 to 25
[Fri May 31 23:23:59 2013] 664.516900 total counts/ 582.483000 bgd. counts: snr = 3.399004
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 4.582706 pixels
  Position = (318.1, 350.4) = 19 14 10.25 4 58 8.2
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source counts = 82.0 +/- 25.8
  Background counts = 582.5
  Rate = 0.003 +/- 0.0008
[Fri May 31 23:23:59 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:59 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:23:59 2013] Source does appear to be extended
[Fri May 31 23:23:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:23:59 2013] Source is confused with source 13
[Fri May 31 23:24:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 23:24:26 2013] Initial guess for spatial extent in simple fitting = 17.05"
[Fri May 31 23:24:26 2013] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.036
[Fri May 31 23:24:26 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 17.05"
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 31 23:24:27 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 31 23:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 31 23:24:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 31 23:24:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:51 2013] Source 14 is offset by 1.581034 and -0.041391 pixels which is larger than
2 X fitted extent = 1.183352 x 1.183352, not incorporating fit results
[Fri May 31 23:24:51 2013] Source 14 is offset by 6.195632 and -6.655989 pixels which is larger than
2 X fitted extent = 6.081425 x 6.081425, not incorporating fit results
[Fri May 31 23:24:51 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:51 2013] Assessing source extent using major axis lower bound
[Fri May 31 23:24:51 2013] Source does appear to be extended
[Fri May 31 23:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:24:24 2013] XMMSAS src. selection expression = ellipse(27627.438000, 30438.511000, 1023.192029, 1023.192029, 0.000000, X, Y)
[Sat Jun  1 00:24:24 2013] Not overwriting source region fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun  1 00:24:24 2013] Extracting stamp from image fullrun_mos1_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (259, 292) - (377, 409)
[Sat Jun  1 00:24:24 2013] XMMSAS bgd. selection expression = annulus(27627.438000, 30438.511000, 1705.320049, 3410.640098, X, Y) && !ellipse(28267.196289, 29962.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.184000, 28443.631200, 1979.936057, 1979.936057, 0.000000, X, Y) && !ellipse(27698.579285, 28728.478424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.036316, 29539.789001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.336400, 28594.323600, 989.968028, 989.968028, 0.000000, X, Y) && !ellipse(27943.775200, 27516.900800, 704.160020, 704.160020, 0.000000, X, Y) && !ellipse(31356.978668, 32986.017029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.948334, 30057.896729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28021.704315, 31761.698059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27750.219604, 27096.639008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.106110, 30475.389465, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 00:24:24 2013] Writing fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14.gif
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/events/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0075140401/products/events/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Jun  1 00:24:25 2013] Mean detx,y = (3050.62, 244.77) 
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/images/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src.img and ../../xmm0075140401/products/images/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/spectra/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sat Jun  1 00:24:25 2013] Setting source spectrum file to fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun  1 00:24:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/lightcurves/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Jun  1 00:24:32 2013] Not generating rmf since there are only 82 counts
[Sat Jun  1 00:24:32 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:24:32 2013] fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14.arf exists, delete to re-create
[Sat Jun  1 00:25:37 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:37 2013] Total counts from fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 1105.00
[Sat Jun  1 00:25:37 2013] Total counts from fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_bgd.pi.gz = 3324.00
[Sat Jun  1 00:25:37 2013] Got source and background scale factors 3164352.000000, 18322708.000000
[Sat Jun  1 00:25:37 2013] User source parameters:
  Position = (318.1, 350.4) = 19 14 10.25 4 58 8.2
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source aperture counts = 530.9 +/- 34.3
  Background aperture counts = 574.1
  Rate = 0.02 +/- 0.001

[Sat Jun  1 00:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:40 2013] Using photon index=1.80, rate=0.00254, arf fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14.arf
[Sat Jun  1 00:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:40 2013] Updating source flux to 3.5e-14
[Sat Jun  1 00:25:50 2013] Flag b found in src. 14 procflags, skipping spectral fitting
[Sat Jun  1 00:25:50 2013] Flag c found in src. 14 procflags, skipping spectral fitting
[Sat Jun  1 00:25:50 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 00:25:53 2013] xmm0075140401/analysis//spectral/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete