[Fri May 31 23:22:39 2013] Detection parameters:
  Position = (322.6, 365.6) = 19 14 8.93 4 59 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.2 +/- 10.1
  Background counts = 24.3
  Rate = 0.002 +/- 0.0004

[Fri May 31 23:22:40 2013] Off-axis axis estimate = 5.18'
[Fri May 31 23:23:32 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:23:32 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Fri May 31 23:23:32 2013] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.717
[Fri May 31 23:23:32 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 9.02"
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src22.ximg exists
[Fri May 31 23:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src22.csv
[Fri May 31 23:23:33 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri May 31 23:23:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src22.csv
[Fri May 31 23:23:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri May 31 23:23:34 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri May 31 23:23:34 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri May 31 23:23:59 2013] Warning, spatial fit 22 centroid is now closest to src. 11
[Fri May 31 23:23:59 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:23:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:23:59 2013] Assessing source extent using major
[Fri May 31 23:23:59 2013] Source does appear to be extended
[Fri May 31 23:23:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 23:24:26 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Fri May 31 23:24:26 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Fri May 31 23:24:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 19, frac = 0.717
[Fri May 31 23:24:26 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 9.02"
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 31 23:24:27 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 31 23:24:27 2013] Fit fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_src19 appears to have run properly
[Fri May 31 23:24:28 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 31 23:24:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 31 23:24:28 2013] fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 31 23:24:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 31 23:24:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0075140401_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 23:24:51 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.913314 pixels away
[Fri May 31 23:24:51 2013] Vigneting correction estimate = 1.000000
[Fri May 31 23:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 23:24:51 2013] Assessing source extent using major
[Fri May 31 23:24:51 2013] Source does appear to be extended
[Fri May 31 23:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:24:24 2013] XMMSAS src. selection expression = ellipse(28021.704315, 31761.698059, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 00:24:24 2013] Not overwriting source region fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src.reg
[Sat Jun  1 00:24:24 2013] Extracting stamp from image fullrun_mos1_xmm0075140401_pi300-10000_cl_sm2.00.img.gz, (285, 328) - (360, 403)
[Sat Jun  1 00:24:25 2013] XMMSAS bgd. selection expression = annulus(28021.704315, 31761.698059, 1087.500000, 2175.000000, X, Y) && !ellipse(28267.196289, 29962.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27866.184000, 28443.631200, 1979.936057, 1979.936057, 0.000000, X, Y) && !ellipse(27698.579285, 28728.478424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28314.036316, 29539.789001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27627.438000, 30438.511000, 1364.256039, 1364.256039, 0.000000, X, Y) && !ellipse(28742.948334, 30057.896729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.106110, 30475.389465, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 00:24:25 2013] Writing fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10.gif
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/events/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0075140401/products/events/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Jun  1 00:24:25 2013] Mean detx,y = (4516.31, 494.05) 
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/images/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0075140401/products/images/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/spectra/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0075140401/products/spectra/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Jun  1 00:24:25 2013] Setting source spectrum file to fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jun  1 00:24:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jun  1 00:24:25 2013] ../../xmm0075140401/products/lightcurves/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0075140401/products/lightcurves/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Jun  1 00:24:32 2013] Not generating rmf since there are only 45 counts
[Sat Jun  1 00:24:32 2013] rmf not generated due to insufficient counts
[Sat Jun  1 00:24:32 2013] fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sat Jun  1 00:25:38 2013] Updating aperture counts using extracted products
[Sat Jun  1 00:25:38 2013] Total counts from fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 240.00
[Sat Jun  1 00:25:38 2013] Total counts from fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1111.00
[Sat Jun  1 00:25:38 2013] Got source and background scale factors 1191056.000000, 6997816.000000
[Sat Jun  1 00:25:38 2013] User source parameters:
  Position = (322.6, 365.6) = 19 14 8.93 4 59 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 50.9 +/- 16.5
  Background aperture counts = 189.1
  Rate = 0.002 +/- 0.0005

[Sat Jun  1 00:25:38 2013] Updating counts from extracted products
[Sat Jun  1 00:25:38 2013] Set source signif. to 50.90/13.75 = 3.70
[Sat Jun  1 00:25:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 00:25:40 2013] Using photon index=1.80, rate=0.00158, arf fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10.arf
[Sat Jun  1 00:25:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 00:25:40 2013] Updating source flux to 2.7e-14
[Sat Jun  1 00:25:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 00:25:53 2013] xmm0075140401/analysis//spectral/fullrun_mos1_xmm0075140401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete