[Wed Dec 28 20:01:44 2011] Detection parameters:
  Position = (125.7, 236.5) = 18 50 14.77 -1 0 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.7 +/- 8.9
  Background counts = 10.6
  Rate = 0.02 +/- 0.004

[Wed Dec 28 20:01:44 2011] Off-axis axis estimate = 13.30'
[Wed Dec 28 20:04:48 2011] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:04:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 20:04:48 2011] Initial guess for spatial extent in simple fitting = 13.08"
[Wed Dec 28 20:04:48 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.996
[Wed Dec 28 20:04:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.08"
[Wed Dec 28 20:23:21 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 20:23:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 20:23:21 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 20:23:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 20:23:21 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:23:21 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 20:23:21 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 20:23:21 2011] Fit fullrun_pn_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 29 02:14:54 2011] Spatial fit model total counts = 416.666000, observed total counts = 422.000000
[Thu Dec 29 02:14:54 2011] Offset between fit and detection position for source 1 = 6.530199 pixels
[Thu Dec 29 02:14:54 2011] 441.783000 total counts/ 317.414000 bgd. counts: snr = 6.980702
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 6.530199 pixels
  Position = (122.5, 230.9) = 18 50 15.71 -1 0 50.3
  Extent = 25.8 (25.0-26.2)", rotation angle = 0
  Source counts = 124.4 +/- 21.0
  Background counts = 317.4
  Rate = 0.06 +/- 0.01
[Thu Dec 29 02:14:54 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:14:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:14:54 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:14:54 2011] Source does appear to be extended
[Thu Dec 29 02:14:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:14:54 2011] Source is confused with source 2
[Thu Dec 29 02:15:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 02:15:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 02:15:22 2011] Initial guess for spatial extent in simple fitting = 25.76"
[Thu Dec 29 02:15:22 2011] source mask rpix=5.9, npix_max = 164, mask sum = 167, frac = 1.012
[Thu Dec 29 02:15:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 25.76"
[Thu Dec 29 02:40:28 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 29 02:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 02:40:28 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 29 02:40:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 02:40:28 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:40:28 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 29 02:40:28 2011] fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 29 02:40:28 2011] Fit fullrun_pn_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec 29 06:52:33 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu Dec 29 06:52:33 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 06:52:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 06:52:33 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 06:52:33 2011] Source does appear to be extended
[Thu Dec 29 06:52:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 06:52:50 2011] XMMSAS src. selection expression = ellipse(10608.906000, 20036.686000, 1545.726044, 1545.726044, 0.000000, X, Y)
[Thu Dec 29 06:52:50 2011] Writing source region out to fullrun_pn_xmm0073740301_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec 29 06:52:50 2011] Extracting stamp from image fullrun_pn_xmm0073740301_pi300-10000_cl_sm2.00.img.gz, (34, 142) - (211, 320)
[Thu Dec 29 06:52:50 2011] XMMSAS bgd. selection expression = annulus(10608.906000, 20036.686000, 2576.210074, 5152.420148, X, Y) && !ellipse(11458.440000, 21475.826000, 2976.944086, 2976.944086, 0.000000, X, Y)
[Thu Dec 29 06:52:50 2011] Writing fullrun_pn_xmm0073740301_pi300-10000_pass1_cl_src1.gif
[Thu Dec 29 06:52:58 2011] Mean detx,y = (11316.60, -8667.70) 
[Thu Dec 29 06:53:02 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 06:54:35 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 06:54:36 2011] Setting source spectrum file to fullrun_pn_xmm0073740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 06:54:36 2011] Setting bgd. spectrum file to fullrun_pn_xmm0073740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec 29 07:47:35 2011] Updating aperture counts using extracted products
[Thu Dec 29 07:47:35 2011] Error reading totcts from fullrun_pn_xmm0073740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 07:47:36 2011] No arf file for this source, not re-computing flux
[Thu Dec 29 07:48:51 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Dec 29 07:48:51 2011] Source 1 has no response, skipping
[Thu Dec 29 07:48:52 2011] xmm0073740301/analysis//spectral/fullrun_pn_xmm0073740301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete