[Wed Dec 28 20:02:52 2011] Detection parameters:
  Position = (260.9, 294.8) = 18 49 35.57 -0 56 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 16.8
  Background counts = 52.6
  Rate = 0.008 +/- 0.001

[Wed Dec 28 20:02:56 2011] Off-axis axis estimate = 2.74'
[Wed Dec 28 20:23:21 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:23:21 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Wed Dec 28 20:23:21 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Wed Dec 28 20:23:21 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.80"
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src13.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src13.csv
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src13.csv
[Thu Dec 29 02:14:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Dec 29 02:14:49 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Dec 29 02:15:09 2011] Warning, spatial fit 13 centroid is now closest to src. 9
[Thu Dec 29 02:15:09 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:15:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:15:09 2011] Assessing source extent using major
[Thu Dec 29 02:15:09 2011] Source does appear to be extended
[Thu Dec 29 02:15:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:15:09 2011] Source is confused with source 2
[Thu Dec 29 02:40:28 2011] Using EEF radius (= 7.80 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 02:40:28 2011] Initial guess for spatial extent in simple fitting = 7.80"
[Thu Dec 29 02:40:28 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Thu Dec 29 02:40:28 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 7.80"
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src11.ximg exists
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Dec 29 06:52:27 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Dec 29 06:52:28 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Dec 29 06:52:45 2011] Warning, spatial fit 11 centroid is now closest to src. 30
[Thu Dec 29 06:52:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 06:52:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 06:52:45 2011] Assessing source extent using major
[Thu Dec 29 06:52:45 2011] Source does appear to be extended
[Thu Dec 29 06:52:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 06:58:46 2011] XMMSAS src. selection expression = ellipse(22648.097595, 25601.491119, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing source region out to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src7_src.reg
[Thu Dec 29 06:58:46 2011] Extracting stamp from image fullrun_mos2_xmm0073740301_pi300-10000_cl_sm2.00.img.gz, (223, 257) - (298, 332)
[Thu Dec 29 06:58:46 2011] XMMSAS bgd. selection expression = annulus(22648.097595, 25601.491119, 1087.500000, 2175.000000, X, Y) && !ellipse(21504.203200, 24982.649600, 731.410421, 731.410421, 0.000000, X, Y) && !ellipse(24455.178000, 23566.331400, 474.250414, 474.250414, 0.000000, X, Y) && !ellipse(23279.936000, 25365.148000, 1228.136035, 1228.136035, 0.000000, X, Y) && !ellipse(25199.115680, 28089.836200, 717.152821, 717.152821, 0.000000, X, Y) && !ellipse(21701.732315, 22829.956482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.000000, 24644.050385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.230000, 26593.820000, 900.832026, 900.832026, 0.000000, X, Y) && !ellipse(24529.007965, 24336.231598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.902069, 24495.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25153.239868, 26143.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25373.830322, 27467.196136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.900000, 25095.616000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(22767.035200, 23573.182000, 932.840027, 932.840027, 0.000000, X, Y) && !ellipse(22628.790000, 26251.334000, 1025.864030, 1025.864030, 0.000000, X, Y) && !ellipse(22203.519400, 22584.844000, 1345.256039, 1345.256039, 0.000000, X, Y) && !ellipse(23156.384369, 25872.508545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.138800, 27490.491540, 1017.224029, 1017.224029, 0.000000, X, Y) && !ellipse(22287.305664, 26205.098755, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src7.gif
[Thu Dec 29 07:02:26 2011] Mean detx,y = (-1767.34, -276.73) 
[Thu Dec 29 07:02:30 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 07:02:57 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 07:02:57 2011] Setting source spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Dec 29 07:02:57 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Dec 29 07:38:25 2011] Not generating rmf since there are only 96 counts
[Thu Dec 29 07:38:25 2011] rmf not generated due to insufficient counts
[Thu Dec 29 07:47:36 2011] Updating aperture counts using extracted products
[Thu Dec 29 07:47:36 2011] Error reading totcts from fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Dec 29 07:47:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 07:47:38 2011] Using photon index=1.80, rate=0.00775, arf fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src7.arf
[Thu Dec 29 07:47:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 07:47:38 2011] Updating source flux to 7.6e-14
[Thu Dec 29 07:47:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting