[Wed Dec 28 20:02:55 2011] Detection parameters:
  Position = (257.7, 262.1) = 18 49 36.49 -0 58 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 13.9
  Background counts = 50.9
  Rate = 0.005 +/- 0.001

[Wed Dec 28 20:02:56 2011] Off-axis axis estimate = 3.96'
[Wed Dec 28 20:23:21 2011] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:23:21 2011] Initial guess for spatial extent in simple fitting = 8.41"
[Wed Dec 28 20:23:21 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.845
[Wed Dec 28 20:23:21 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 8.41"
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src31.ximg exists
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Dec 29 02:14:49 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src31 appears to have run properly
[Thu Dec 29 02:14:50 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Dec 29 02:14:50 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Dec 29 02:14:50 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Thu Dec 29 02:15:09 2011] Source 37 is offset by -0.185287 and 5.963485 pixels which is larger than
2 X fitted extent = 0.989044 x 0.989044, not incorporating fit results
[Thu Dec 29 02:15:09 2011] Spatial fit model total counts = 409.774000, observed total counts = 409.000000
[Thu Dec 29 02:15:09 2011] Offset between fit and detection position for source 37 = 2.725849 pixels
[Thu Dec 29 02:15:09 2011] 375.358000 total counts/ 252.001000 bgd. counts: snr = 7.770745
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 2.725849 pixels
  Position = (255.8, 260.2) = 18 49 37.06 -0 58 42.9
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 123.4 +/- 19.4
  Background counts = 252.0
  Rate = 0.01 +/- 0.002
[Thu Dec 29 02:15:09 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:15:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:15:09 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:15:09 2011] Source does appear to be extended
[Thu Dec 29 02:15:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:15:09 2011] Source is confused with source 14
[Thu Dec 29 02:40:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 02:40:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 02:40:28 2011] Initial guess for spatial extent in simple fitting = 16.82"
[Thu Dec 29 02:40:28 2011] source mask rpix=3.9, npix_max = 76, mask sum = 81, frac = 1.062
[Thu Dec 29 02:40:28 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 16.82"
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src24.ximg exists
[Thu Dec 29 06:52:28 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src24.csv
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Dec 29 06:52:28 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src24.csv
[Thu Dec 29 06:52:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 06:52:29 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Dec 29 06:52:29 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Dec 29 06:52:29 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Dec 29 06:52:45 2011] Source 37 is offset by -2.142030 and 4.065747 pixels which is larger than
2 X fitted extent = 0.989044 x 0.989044, not incorporating fit results
[Thu Dec 29 06:52:45 2011] Warning, spatial fit 24 centroid is now closest to src. 23
[Thu Dec 29 06:52:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 06:52:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 06:52:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 06:52:45 2011] Source does appear to be extended
[Thu Dec 29 06:52:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 06:58:46 2011] XMMSAS src. selection expression = ellipse(22203.519400, 22584.844000, 1008.942029, 1008.942029, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing source region out to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src37_src.reg
[Thu Dec 29 06:58:46 2011] Extracting stamp from image fullrun_mos2_xmm0073740301_pi300-10000_cl_sm2.00.img.gz, (198, 202) - (314, 318)
[Thu Dec 29 06:58:46 2011] XMMSAS bgd. selection expression = annulus(22203.519400, 22584.844000, 1681.570048, 3363.140097, X, Y) && !ellipse(21504.203200, 24982.649600, 731.410421, 731.410421, 0.000000, X, Y) && !ellipse(24455.178000, 23566.331400, 474.250414, 474.250414, 0.000000, X, Y) && !ellipse(23279.936000, 25365.148000, 1228.136035, 1228.136035, 0.000000, X, Y) && !ellipse(21701.732315, 22829.956482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.000000, 24644.050385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.230000, 26593.820000, 900.832026, 900.832026, 0.000000, X, Y) && !ellipse(24529.007965, 24336.231598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.097595, 25601.491119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.902069, 24495.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25153.239868, 26143.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.900000, 25095.616000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(22767.035200, 23573.182000, 932.840027, 932.840027, 0.000000, X, Y) && !ellipse(22628.790000, 26251.334000, 1025.864030, 1025.864030, 0.000000, X, Y) && !ellipse(23156.384369, 25872.508545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.807953, 22443.559448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22287.305664, 26205.098755, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src37.gif
[Thu Dec 29 07:07:06 2011] Mean detx,y = (-1384.57, 2602.88) 
[Thu Dec 29 07:07:09 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 07:07:34 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 07:07:35 2011] Setting source spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Dec 29 07:07:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Thu Dec 29 07:47:37 2011] Updating aperture counts using extracted products
[Thu Dec 29 07:47:37 2011] Error reading totcts from fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Thu Dec 29 07:47:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 07:47:39 2011] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src37.arf
[Thu Dec 29 07:47:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 07:47:39 2011] Updating source flux to 1.6e-13
[Thu Dec 29 07:47:40 2011] Flag b found in src. 37 procflags, skipping spectral fitting
[Thu Dec 29 07:47:40 2011] Flag c found in src. 37 procflags, skipping spectral fitting