[Wed Dec 28 20:02:54 2011] Detection parameters:
  Position = (251.1, 298.0) = 18 49 38.41 -0 55 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.0 +/- 15.5
  Background counts = 46.8
  Rate = 0.007 +/- 0.001

[Wed Dec 28 20:02:56 2011] Off-axis axis estimate = 3.43'
[Wed Dec 28 20:23:21 2011] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:23:21 2011] Initial guess for spatial extent in simple fitting = 8.14"
[Wed Dec 28 20:23:21 2011] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.711
[Wed Dec 28 20:23:21 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 8.14"
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src18.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src18.csv
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src18.csv
[Thu Dec 29 02:14:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Dec 29 02:14:49 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Dec 29 02:15:09 2011] Source 30 is offset by 1.200493 and 8.166401 pixels which is larger than
2 X fitted extent = 6.798391 x 6.798391, not incorporating fit results
[Thu Dec 29 02:15:09 2011] Spatial fit model total counts = 364.596000, observed total counts = 362.000000
[Thu Dec 29 02:15:09 2011] Offset between fit and detection position for source 30 = 4.786964 pixels
[Thu Dec 29 02:15:09 2011] 360.849000 total counts/ 237.742000 bgd. counts: snr = 7.984170
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.786964 pixels
  Position = (249.7, 293.4) = 18 49 38.83 -0 56 18.3
  Extent = 16.2 (16.1-16.3)", rotation angle = 0
  Source counts = 123.1 +/- 19.0
  Background counts = 237.7
  Rate = 0.01 +/- 0.002
[Thu Dec 29 02:15:09 2011] Spatial fit model total counts = 598.927000, observed total counts = 603.000000
[Thu Dec 29 02:15:09 2011] Offset between fit and detection position for source 30 = 4.776829 pixels
[Thu Dec 29 02:15:09 2011] Warning, changing simple spatial fit ID from 18 to 23
[Thu Dec 29 02:15:09 2011] 580.072200 total counts/ 486.780000 bgd. counts: snr = 4.228428
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.776829 pixels
  Position = (250.7, 288.7) = 18 49 38.53 -0 56 38.6
  Extent = 16.1 (16.1-32.3)", rotation angle = 0
  Source counts = 93.3 +/- 24.1
  Background counts = 486.8
  Rate = 0.01 +/- 0.003
[Thu Dec 29 02:15:09 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:15:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:15:09 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:15:09 2011] Source does appear to be extended
[Thu Dec 29 02:15:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:15:09 2011] Source is confused with source 1
[Thu Dec 29 02:40:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 02:40:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 02:40:28 2011] Initial guess for spatial extent in simple fitting = 16.14"
[Thu Dec 29 02:40:28 2011] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.016
[Thu Dec 29 02:40:28 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 16.14"
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src14.ximg exists
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Dec 29 06:52:27 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src14 appears to have run properly
[Thu Dec 29 06:52:29 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Dec 29 06:52:29 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Dec 29 06:52:29 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Dec 29 06:52:45 2011] Source 30 is offset by 0.284184 and -6.817609 pixels which is larger than
2 X fitted extent = 1.050878 x 1.050878, not incorporating fit results
[Thu Dec 29 06:52:45 2011] Spatial fit model total counts = 575.838000, observed total counts = 572.000000
[Thu Dec 29 06:52:45 2011] Offset between fit and detection position for source 30 = 3.164237 pixels
[Thu Dec 29 06:52:45 2011] Warning, changing simple spatial fit ID from 14 to 11
[Thu Dec 29 06:52:45 2011] 577.251900 total counts/ 552.399000 bgd. counts: snr = 1.057428
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.164237 pixels
  Position = (253.8, 289.0) = 18 49 37.62 -0 56 37.4
  Extent = 9.6 (1.9-15.6)", rotation angle = 0
  Source counts = 24.9 +/- 24.0
  Background counts = 552.4
  Rate = 0.003 +/- 0.003
  Deleting source due to low Poisson probability