[Wed Dec 28 20:02:52 2011] Detection parameters:
  Position = (265.6, 288.0) = 18 49 34.19 -0 56 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.6 +/- 18.1
  Background counts = 56.4
  Rate = 0.01 +/- 0.001

[Wed Dec 28 20:02:56 2011] Off-axis axis estimate = 2.49'
[Wed Dec 28 20:23:21 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:23:21 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Dec 28 20:23:21 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Wed Dec 28 20:23:21 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.68"
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src4.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src4.csv
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src4.csv
[Thu Dec 29 02:14:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Dec 29 02:14:49 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Dec 29 02:15:09 2011] Spatial fit model total counts = 658.024000, observed total counts = 659.000000
[Thu Dec 29 02:15:09 2011] Offset between fit and detection position for source 2 = 4.796939 pixels
[Thu Dec 29 02:15:09 2011] 598.566000 total counts/ 470.844000 bgd. counts: snr = 5.886094
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.796939 pixels
  Position = (268.1, 292.1) = 18 49 33.47 -0 56 23.9
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 127.7 +/- 24.5
  Background counts = 470.8
  Rate = 0.01 +/- 0.003
[Thu Dec 29 02:15:09 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:15:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:15:09 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:15:09 2011] Source does appear to be extended
[Thu Dec 29 02:15:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:15:09 2011] Source is confused with source 5
[Thu Dec 29 02:15:09 2011] Source is confused with source 7
[Thu Dec 29 02:15:09 2011] Source is confused with source 29
[Thu Dec 29 02:40:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 02:40:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 02:40:28 2011] Initial guess for spatial extent in simple fitting = 15.35"
[Thu Dec 29 02:40:28 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.986
[Thu Dec 29 02:40:28 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 15.35"
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Dec 29 06:52:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src3.csv
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Dec 29 06:52:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src3.csv
[Thu Dec 29 06:52:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec 29 06:52:28 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec 29 06:52:45 2011] Warning, spatial fit 3 centroid is now closest to src. 31
[Thu Dec 29 06:52:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 06:52:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 06:52:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 06:52:45 2011] Source does appear to be extended
[Thu Dec 29 06:52:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 06:58:46 2011] XMMSAS src. selection expression = ellipse(23279.936000, 25365.148000, 921.102027, 921.102027, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing source region out to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec 29 06:58:46 2011] Extracting stamp from image fullrun_mos2_xmm0073740301_pi300-10000_cl_sm2.00.img.gz, (215, 239) - (321, 345)
[Thu Dec 29 06:58:46 2011] XMMSAS bgd. selection expression = annulus(23279.936000, 25365.148000, 1535.170044, 3070.340088, X, Y) && !ellipse(21504.203200, 24982.649600, 731.410421, 731.410421, 0.000000, X, Y) && !ellipse(24455.178000, 23566.331400, 474.250414, 474.250414, 0.000000, X, Y) && !ellipse(25199.115680, 28089.836200, 717.152821, 717.152821, 0.000000, X, Y) && !ellipse(21701.732315, 22829.956482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.000000, 24644.050385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25599.230000, 26593.820000, 900.832026, 900.832026, 0.000000, X, Y) && !ellipse(24529.007965, 24336.231598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.097595, 25601.491119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26709.280200, 28406.354000, 892.040026, 892.040026, 0.000000, X, Y) && !ellipse(22648.902069, 24495.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25153.239868, 26143.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26491.220642, 26765.615265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25373.830322, 27467.196136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25717.752197, 27367.311279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.900000, 25095.616000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(22767.035200, 23573.182000, 932.840027, 932.840027, 0.000000, X, Y) && !ellipse(22628.790000, 26251.334000, 1025.864030, 1025.864030, 0.000000, X, Y) && !ellipse(22203.519400, 22584.844000, 1345.256039, 1345.256039, 0.000000, X, Y) && !ellipse(23156.384369, 25872.508545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.807953, 22443.559448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.138800, 27490.491540, 1017.224029, 1017.224029, 0.000000, X, Y) && !ellipse(22287.305664, 26205.098755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26390.568481, 27276.777435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26958.494000, 27624.294000, 1124.688032, 1124.688032, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src2.gif
[Thu Dec 29 06:59:36 2011] Mean detx,y = (-1161.88, -235.37) 
[Thu Dec 29 06:59:39 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 07:00:08 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 07:00:08 2011] Setting source spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec 29 07:00:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Dec 29 07:47:36 2011] Updating aperture counts using extracted products
[Thu Dec 29 07:47:36 2011] Error reading totcts from fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec 29 07:47:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 07:47:38 2011] Using photon index=1.80, rate=0.0149, arf fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src2.arf
[Thu Dec 29 07:47:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 07:47:38 2011] Updating source flux to 1.4e-13
[Thu Dec 29 07:47:40 2011] Flag c found in src. 2 procflags, skipping spectral fitting