[Wed Dec 28 20:02:52 2011] Detection parameters:
  Position = (247.0, 287.9) = 18 49 39.60 -0 56 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.3 +/- 20.0
  Background counts = 47.4
  Rate = 0.01 +/- 0.002

[Wed Dec 28 20:02:56 2011] Off-axis axis estimate = 3.81'
[Wed Dec 28 20:23:21 2011] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:23:21 2011] Initial guess for spatial extent in simple fitting = 8.33"
[Wed Dec 28 20:23:21 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.857
[Wed Dec 28 20:23:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 8.33"
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src1.csv
[Thu Dec 29 02:14:48 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Dec 29 02:14:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src1.csv
[Thu Dec 29 02:14:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Dec 29 02:14:49 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Dec 29 02:14:49 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Dec 29 02:15:09 2011] Spatial fit model total counts = 454.384000, observed total counts = 452.000000
[Thu Dec 29 02:15:09 2011] Offset between fit and detection position for source 1 = 0.762168 pixels
[Thu Dec 29 02:15:09 2011] 450.275000 total counts/ 337.810000 bgd. counts: snr = 6.119010
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.762168 pixels
  Position = (247.7, 287.7) = 18 49 39.39 -0 56 43.0
  Extent = 9.1 (6.4-12.3)", rotation angle = 0
  Source counts = 112.5 +/- 21.2
  Background counts = 337.8
  Rate = 0.01 +/- 0.002
[Thu Dec 29 02:15:09 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:15:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:15:09 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:15:09 2011] Source does appear to be extended
[Thu Dec 29 02:15:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:15:09 2011] Source is confused with source 30
[Thu Dec 29 02:40:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 02:40:28 2011] Initial guess for spatial extent in simple fitting = 9.14"
[Thu Dec 29 02:40:28 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923
[Thu Dec 29 02:40:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.14"
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Dec 29 06:52:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 06:52:27 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Dec 29 06:52:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src1.csv
[Thu Dec 29 06:52:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Dec 29 06:52:28 2011] fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Dec 29 06:52:28 2011] Fit fullrun_mos2_xmm0073740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Dec 29 06:52:45 2011] Warning, spatial fit 1 centroid is now closest to src. 30
[Thu Dec 29 06:52:45 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 06:52:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 06:52:45 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 06:52:45 2011] Source does appear to be extended
[Thu Dec 29 06:52:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 06:58:46 2011] XMMSAS src. selection expression = ellipse(21504.203200, 24982.649600, 548.557816, 548.557816, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing source region out to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1_src.reg
[Thu Dec 29 06:58:46 2011] Extracting stamp from image fullrun_mos2_xmm0073740301_pi300-10000_cl_sm2.00.img.gz, (216, 256) - (279, 319)
[Thu Dec 29 06:58:46 2011] XMMSAS bgd. selection expression = annulus(21504.203200, 24982.649600, 914.263026, 1828.526053, X, Y) && !ellipse(23279.936000, 25365.148000, 1228.136035, 1228.136035, 0.000000, X, Y) && !ellipse(21701.732315, 22829.956482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.000000, 24644.050385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.097595, 25601.491119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22648.902069, 24495.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.900000, 25095.616000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(22767.035200, 23573.182000, 932.840027, 932.840027, 0.000000, X, Y) && !ellipse(22628.790000, 26251.334000, 1025.864030, 1025.864030, 0.000000, X, Y) && !ellipse(22203.519400, 22584.844000, 1345.256039, 1345.256039, 0.000000, X, Y) && !ellipse(23156.384369, 25872.508545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23368.807953, 22443.559448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.138800, 27490.491540, 1017.224029, 1017.224029, 0.000000, X, Y) && !ellipse(22287.305664, 26205.098755, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 06:58:46 2011] Writing fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1.gif
[Thu Dec 29 06:58:50 2011] Mean detx,y = (-2629.45, 635.66) 
[Thu Dec 29 06:58:53 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 06:59:07 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 06:59:08 2011] Setting source spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 06:59:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Dec 29 07:47:36 2011] Updating aperture counts using extracted products
[Thu Dec 29 07:47:36 2011] Error reading totcts from fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Dec 29 07:47:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 07:47:38 2011] Using photon index=1.80, rate=0.0131, arf fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1.arf
[Thu Dec 29 07:47:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 07:47:38 2011] Updating source flux to 1.4e-13
[Thu Dec 29 07:47:40 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Dec 29 07:48:51 2011] Reading fit data from xmm0073740301/analysis//spectral/fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Dec 29 07:48:51 2011] Spectral fit parameter nH value = 3.39035e+22
[Thu Dec 29 07:48:51 2011] Spectral fit parameter PhoIndex value = 6.6996
[Thu Dec 29 07:48:51 2011] Failed to get F(0.3-8.0) from xmm0073740301/analysis//spectral/fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Dec 29 07:48:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 07:48:51 2011] Using Nh = 3.4e+22, photon index=6.70, rate=0.0131, arf fullrun_mos2_xmm0073740301_pi300-10000_pass1_cl_src1.arf
[Thu Dec 29 07:48:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 07:48:51 2011] Updating source flux to 1.1e-13