[Thu Jun 20 10:08:00 2013] Detection parameters:
  Position = (294.5, 331.9) = 18 49 25.75 -0 53 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.9 +/- 16.3
  Background counts = 80.6
  Rate = 0.006 +/- 0.001

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 2.44'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Thu Jun 20 10:09:37 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.980
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 86 for pass 0, mean size = 7.65"
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src86.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src86.csv
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src86_1.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src86.csv
[Thu Jun 20 18:55:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:16 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Thu Jun 20 18:55:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src86.csv
[Thu Jun 20 18:55:16 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Thu Jun 20 18:55:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src86.csv
[Thu Jun 20 18:55:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Spatial fit model total counts = 164.816000, observed total counts = 165.000000
[Thu Jun 20 18:55:40 2013] Offset between fit and detection position for source 86 = 3.097087 pixels
[Thu Jun 20 18:55:40 2013] Warning, changing simple spatial fit ID from 86 to 60
[Thu Jun 20 18:55:40 2013] 155.821200 total counts/ 125.775000 bgd. counts: snr = 2.679121
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 3.097087 pixels
  Position = (297.5, 332.8) = 18 49 24.89 -0 53 24.3
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 30.0 +/- 12.5
  Background counts = 125.8
  Rate = 0.007 +/- 0.003
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 60
[Thu Jun 20 18:55:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 15.11"
[Thu Jun 20 18:55:49 2013] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.013
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 15.11"
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src74.ximg exists
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src74_1.ximg exists
[Fri Jun 21 03:02:05 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src74 appears to have run properly
[Fri Jun 21 03:02:09 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Fri Jun 21 03:02:09 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Fri Jun 21 03:02:09 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Fri Jun 21 03:02:43 2013] Spatial fit model total counts = 164.731000, observed total counts = 165.000000
[Fri Jun 21 03:02:43 2013] Offset between fit and detection position for source 86 = 0.314351 pixels
[Fri Jun 21 03:02:43 2013] Warning, changing simple spatial fit ID from 74 to 51
[Fri Jun 21 03:02:43 2013] 154.208300 total counts/ 123.053000 bgd. counts: snr = 2.808574
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 0.314351 pixels
  Position = (297.6, 332.5) = 18 49 24.85 -0 53 25.5
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source counts = 31.2 +/- 12.4
  Background counts = 123.1
  Rate = 0.007 +/- 0.003
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:03:03 2013] XMMSAS src. selection expression = ellipse(25844.514000, 28881.602000, 906.708026, 906.708026, 0.000000, X, Y)
[Fri Jun 21 03:03:03 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86_src.reg
[Fri Jun 21 03:03:03 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (246, 280) - (350, 385)
[Fri Jun 21 03:03:03 2013] XMMSAS bgd. selection expression = annulus(25844.514000, 28881.602000, 1511.180043, 3022.360087, X, Y) && !ellipse(25351.660828, 30204.486206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.818200, 27824.316800, 1072.096031, 385.364011, 27.898900, X, Y) && !ellipse(23182.891400, 30919.572000, 1347.552039, 1347.552039, 0.000000, X, Y) && !ellipse(24742.859955, 30160.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24727.604156, 29439.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28572.293671, 29256.916870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23107.526520, 29098.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.830000, 29128.180000, 1313.168038, 1313.168038, 0.000000, X, Y) && !ellipse(26406.379181, 28576.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26900.873600, 28562.472000, 1748.592050, 1748.592050, 0.000000, X, Y) && !ellipse(26341.519470, 27968.117859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.914337, 27450.849121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.444000, 27621.714000, 1168.328034, 1168.328034, 0.000000, X, Y) && !ellipse(25280.954742, 27380.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.976000, 26621.571400, 1105.376032, 1105.376032, 0.000000, X, Y) && !ellipse(22448.479218, 30738.667480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.616600, 30792.644200, 1002.208029, 1002.208029, 0.000000, X, Y) && !ellipse(23651.733185, 29880.901855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.644000, 29673.726000, 1246.240036, 1246.240036, 0.000000, X, Y) && !ellipse(26812.149600, 29924.574000, 1279.640037, 1279.640037, 0.000000, X, Y) && !ellipse(27629.389221, 29361.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.226562, 29433.131165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26013.436000, 29656.018000, 1304.648038, 1304.648038, 0.000000, X, Y) && !ellipse(29431.591248, 28830.240387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.592800, 28885.618000, 1130.568033, 1130.568033, 0.000000, X, Y) && !ellipse(26045.441223, 28320.018097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27554.950165, 28055.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.737854, 28066.449524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26823.949600, 28106.786000, 874.296025, 874.296025, 0.000000, X, Y) && !ellipse(28767.921539, 27548.280731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29458.016754, 27273.925934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.339508, 26923.393036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25891.616400, 27324.610000, 1875.664054, 234.457607, 90.491743, X, Y) && !ellipse(28203.385315, 26783.172974, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 03:03:03 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86.gif
[Fri Jun 21 03:36:10 2013] Mean detx,y = (241.96, -4262.94) 
[Fri Jun 21 03:36:13 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:36:47 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:36:47 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Fri Jun 21 03:36:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Fri Jun 21 03:42:28 2013] Not generating rmf since there are only 31 counts
[Fri Jun 21 03:42:28 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:31 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:31 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 180.00
[Fri Jun 21 03:43:31 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86_bgd.pi.gz = 207.00
[Fri Jun 21 03:43:31 2013] Got source and background scale factors 2449448.000000, 3183242.000000
[Fri Jun 21 03:43:31 2013] User source parameters:
  Position = (297.6, 332.5) = 18 49 24.85 -0 53 25.5
  Extent = 15.1 (15.1-30.2)", rotation angle = 0
  Source aperture counts = 20.7 +/- 14.4
  Background aperture counts = 159.3
  Rate = 0.005 +/- 0.003

[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Flag c found in src. 86 procflags, skipping spectral fitting
[Fri Jun 21 03:43:36 2013] Source 86 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete