[Thu Jun 20 10:07:59 2013] Detection parameters:
  Position = (298.3, 342.2) = 18 49 24.66 -0 52 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.7 +/- 15.9
  Background counts = 74.4
  Rate = 0.006 +/- 0.001

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 3.17'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 8.02"
[Thu Jun 20 10:09:37 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.139
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 8.02"
[Thu Jun 20 18:55:12 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src81.ximg exists
[Thu Jun 20 18:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src81.csv
[Thu Jun 20 18:55:12 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src81.csv
[Thu Jun 20 18:55:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:16 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu Jun 20 18:55:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Jun 20 18:55:16 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu Jun 20 18:55:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Jun 20 18:55:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Source 81 is offset by 1.312166 and -0.315165 pixels which is larger than
2 X fitted extent = 0.946097 x 0.946097, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Source 81 is offset by 6.550580 and 1.819111 pixels which is larger than
2 X fitted extent = 1.532046 x 1.532046, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 81 centroid is now closest to src. 55
[Thu Jun 20 18:55:40 2013] Spatial fit model total counts = 105.779000, observed total counts = 105.000000
[Thu Jun 20 18:55:40 2013] Offset between fit and detection position for source 81 = 3.445637 pixels
[Thu Jun 20 18:55:40 2013] Warning, changing simple spatial fit ID from 81 to 85
[Thu Jun 20 18:55:40 2013] 94.814400 total counts/ 59.781300 bgd. counts: snr = 4.531019
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 3.445637 pixels
  Position = (294.9, 341.6) = 18 49 25.65 -0 52 45.9
  Extent = 15.6 (15.5-15.6)", rotation angle = 0
  Source counts = 35.0 +/- 9.7
  Background counts = 59.8
  Rate = 0.008 +/- 0.002
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major axis lower bound
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 22
[Thu Jun 20 18:55:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 15.58"
[Thu Jun 20 18:55:49 2013] source mask rpix=3.6, npix_max = 66, mask sum = 48, frac = 0.720
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 15.58"
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src69.ximg exists
[Fri Jun 21 03:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src69.csv
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src69_1.ximg exists
[Fri Jun 21 03:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src69.csv
[Fri Jun 21 03:02:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:09 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri Jun 21 03:02:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src69.csv
[Fri Jun 21 03:02:09 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri Jun 21 03:02:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src69.csv
[Fri Jun 21 03:02:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:43 2013] Warning, spatial fit 69 centroid is now closest to src. 37
[Fri Jun 21 03:02:44 2013] Source 81 is offset by -2.125223 and -0.883655 pixels which is larger than
2 X fitted extent = 1.023090 x 1.023090, not incorporating fit results
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:03:03 2013] XMMSAS src. selection expression = ellipse(25604.644000, 29673.726000, 934.680027, 934.680027, 0.000000, X, Y)
[Fri Jun 21 03:03:03 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81_src.reg
[Fri Jun 21 03:03:03 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (241, 288) - (349, 395)
[Fri Jun 21 03:03:03 2013] XMMSAS bgd. selection expression = annulus(25604.644000, 29673.726000, 1557.800045, 3115.600090, X, Y) && !ellipse(25351.660828, 30204.486206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.818200, 27824.316800, 1072.096031, 385.364011, 27.898900, X, Y) && !ellipse(23182.891400, 30919.572000, 1347.552039, 1347.552039, 0.000000, X, Y) && !ellipse(24742.859955, 30160.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24727.604156, 29439.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28572.293671, 29256.916870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23107.526520, 29098.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.830000, 29128.180000, 1313.168038, 1313.168038, 0.000000, X, Y) && !ellipse(26406.379181, 28576.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26900.873600, 28562.472000, 1748.592050, 1748.592050, 0.000000, X, Y) && !ellipse(26341.519470, 27968.117859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.914337, 27450.849121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.444000, 27621.714000, 1168.328034, 1168.328034, 0.000000, X, Y) && !ellipse(25280.954742, 27380.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26437.976000, 26621.571400, 1105.376032, 1105.376032, 0.000000, X, Y) && !ellipse(22448.479218, 30738.667480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.616600, 30792.644200, 1002.208029, 1002.208029, 0.000000, X, Y) && !ellipse(23651.733185, 29880.901855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26812.149600, 29924.574000, 1279.640037, 1279.640037, 0.000000, X, Y) && !ellipse(27629.389221, 29361.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.226562, 29433.131165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26013.436000, 29656.018000, 1304.648038, 1304.648038, 0.000000, X, Y) && !ellipse(25844.514000, 28881.602000, 1208.944035, 1208.944035, 0.000000, X, Y) && !ellipse(29431.591248, 28830.240387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.592800, 28885.618000, 1130.568033, 1130.568033, 0.000000, X, Y) && !ellipse(26045.441223, 28320.018097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27554.950165, 28055.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.737854, 28066.449524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26823.949600, 28106.786000, 874.296025, 874.296025, 0.000000, X, Y) && !ellipse(28767.921539, 27548.280731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29458.016754, 27273.925934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.339508, 26923.393036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25891.616400, 27324.610000, 1875.664054, 234.457607, 90.491743, X, Y) && !ellipse(28203.385315, 26783.172974, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 03:03:03 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81.gif
[Fri Jun 21 03:32:52 2013] Mean detx,y = (-324.97, -4981.24) 
[Fri Jun 21 03:32:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:33:42 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:33:42 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Fri Jun 21 03:33:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Fri Jun 21 03:42:25 2013] Not generating rmf since there are only 35 counts
[Fri Jun 21 03:42:25 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:30 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:30 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81_src_b10.pi.gz = 113.00
[Fri Jun 21 03:43:30 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81_bgd.pi.gz = 154.00
[Fri Jun 21 03:43:30 2013] Got source and background scale factors 2566412.000000, 5065173.000000
[Fri Jun 21 03:43:30 2013] User source parameters:
  Position = (294.9, 341.6) = 18 49 25.65 -0 52 45.9
  Extent = 15.6 (15.5-15.6)", rotation angle = 0
  Source aperture counts = 35.0 +/- 11.7
  Background aperture counts = 78.0
  Rate = 0.008 +/- 0.003

[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Flag b found in src. 81 procflags, skipping spectral fitting
[Fri Jun 21 03:43:36 2013] Flag c found in src. 81 procflags, skipping spectral fitting
[Fri Jun 21 03:43:36 2013] Source 81 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete