[Thu Jun 20 10:07:59 2013] Detection parameters:
  Position = (416.3, 314.4) = 18 48 50.42 -0 54 44.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 15.5
  Background counts = 74.6
  Rate = 0.004 +/- 0.0009

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 8.62'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 10.74"
[Thu Jun 20 18:55:12 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src67.ximg exists
[Thu Jun 20 18:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src67.csv
[Thu Jun 20 18:55:12 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src67_1.ximg exists
[Thu Jun 20 18:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src67.csv
[Thu Jun 20 18:55:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src67.csv
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src67.csv
[Thu Jun 20 18:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 67 centroid is now closest to src. 62
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 62
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 10.74"
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src57.ximg exists
[Fri Jun 21 03:02:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src57.csv
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src57_1.ximg exists
[Fri Jun 21 03:02:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src57.csv
[Fri Jun 21 03:02:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:08 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Fri Jun 21 03:02:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src57.csv
[Fri Jun 21 03:02:08 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Fri Jun 21 03:02:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src57.csv
[Fri Jun 21 03:02:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:43 2013] Source 67 is offset by 6.935954 and 5.534751 pixels which is larger than
2 X fitted extent = 5.915586 x 5.915586, not incorporating fit results
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:03:02 2013] XMMSAS src. selection expression = ellipse(36169.967987, 27303.577301, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:03:02 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67_src.reg
[Fri Jun 21 03:03:02 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (379, 277) - (454, 352)
[Fri Jun 21 03:03:02 2013] XMMSAS bgd. selection expression = annulus(36169.967987, 27303.577301, 1087.500000, 2175.000000, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38807.130000, 28549.490000, 1864.352054, 1864.352054, 0.000000, X, Y) && !ellipse(38863.649200, 27631.067200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.351532, 27409.058960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38893.186000, 29886.760000, 1601.632046, 1601.632046, 0.000000, X, Y) && !ellipse(37753.995636, 29450.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38401.690033, 25879.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37959.656860, 30313.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38680.798000, 29885.251800, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37027.383148, 29435.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.206970, 28066.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.081268, 26565.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.716919, 26753.880035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37529.401398, 25201.818939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36470.106000, 29640.331000, 1324.864038, 1324.864038, 0.000000, X, Y) && !ellipse(36719.837830, 28852.016937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.412000, 28214.572000, 1683.216048, 1683.216048, 0.000000, X, Y) && !ellipse(36771.857819, 26617.228333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37349.474400, 25891.922000, 1745.088050, 1745.088050, 0.000000, X, Y) && !ellipse(37688.798737, 25906.941620, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 03:03:02 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67.gif
[Fri Jun 21 03:26:49 2013] Mean detx,y = (10427.45, -6241.32) 
[Fri Jun 21 03:26:52 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:27:16 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:27:16 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Fri Jun 21 03:27:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Fri Jun 21 03:42:19 2013] Not generating rmf since there are only 72 counts
[Fri Jun 21 03:42:19 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:27 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:27 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 22.00
[Fri Jun 21 03:43:27 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67_bgd.pi.gz = 89.00
[Fri Jun 21 03:43:27 2013] Got source and background scale factors 1254748.000000, 3452225.000000
[Fri Jun 21 03:43:27 2013] User source parameters:
  Position = (416.3, 314.4) = 18 48 50.42 -0 54 44.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -10.3 +/- 5.8
  Background aperture counts = 32.3
  Rate = -0.002 +/- 0.001

[Fri Jun 21 03:43:27 2013] Updating counts from extracted products
[Fri Jun 21 03:43:27 2013] Set source signif. to -10.35/5.69 = -1.82
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete