[Thu Jun 20 10:07:58 2013] Detection parameters:
  Position = (285.0, 347.2) = 18 49 28.52 -0 52 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.6 +/- 18.3
  Background counts = 79.3
  Rate = 0.009 +/- 0.002

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 3.67'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Jun 20 10:09:37 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.26"
[Thu Jun 20 18:55:12 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src51.ximg exists
[Thu Jun 20 18:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src51.csv
[Thu Jun 20 18:55:12 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu Jun 20 18:55:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src51.csv
[Thu Jun 20 18:55:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src51.csv
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src51.csv
[Thu Jun 20 18:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 51 centroid is now closest to src. 81
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 22
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Jun 20 18:55:49 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 8.26"
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src43.ximg exists
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri Jun 21 03:02:04 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src43 appears to have run properly
[Fri Jun 21 03:02:07 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri Jun 21 03:02:07 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri Jun 21 03:02:07 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri Jun 21 03:02:43 2013] Source 51 is offset by 3.401540 and -3.819752 pixels which is larger than
2 X fitted extent = 0.949977 x 0.949977, not incorporating fit results
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:03:00 2013] XMMSAS src. selection expression = ellipse(24742.859955, 30160.821594, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:03:00 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51_src.reg
[Fri Jun 21 03:03:00 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (247, 310) - (322, 385)
[Fri Jun 21 03:03:00 2013] XMMSAS bgd. selection expression = annulus(24742.859955, 30160.821594, 1087.500000, 2175.000000, X, Y) && !ellipse(25351.660828, 30204.486206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25323.818200, 27824.316800, 1072.096031, 385.364011, 27.898900, X, Y) && !ellipse(23182.891400, 30919.572000, 1347.552039, 1347.552039, 0.000000, X, Y) && !ellipse(24727.604156, 29439.370483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23107.526520, 29098.939972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27918.830000, 29128.180000, 1313.168038, 1313.168038, 0.000000, X, Y) && !ellipse(26406.379181, 28576.183289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26900.873600, 28562.472000, 1748.592050, 1748.592050, 0.000000, X, Y) && !ellipse(26341.519470, 27968.117859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26329.914337, 27450.849121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.444000, 27621.714000, 1168.328034, 1168.328034, 0.000000, X, Y) && !ellipse(25280.954742, 27380.939545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22448.479218, 30738.667480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.616600, 30792.644200, 1002.208029, 1002.208029, 0.000000, X, Y) && !ellipse(23651.733185, 29880.901855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25604.644000, 29673.726000, 1246.240036, 1246.240036, 0.000000, X, Y) && !ellipse(26812.149600, 29924.574000, 1279.640037, 1279.640037, 0.000000, X, Y) && !ellipse(27629.389221, 29361.628571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24123.226562, 29433.131165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26013.436000, 29656.018000, 1304.648038, 1304.648038, 0.000000, X, Y) && !ellipse(25844.514000, 28881.602000, 1208.944035, 1208.944035, 0.000000, X, Y) && !ellipse(24221.592800, 28885.618000, 1130.568033, 1130.568033, 0.000000, X, Y) && !ellipse(26045.441223, 28320.018097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27554.950165, 28055.449738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.737854, 28066.449524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26823.949600, 28106.786000, 874.296025, 874.296025, 0.000000, X, Y) && !ellipse(25891.616400, 27324.610000, 1875.664054, 234.457607, 90.491743, X, Y)
[Fri Jun 21 03:03:00 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51.gif
[Fri Jun 21 03:20:00 2013] Mean detx,y = (-1305.15, -5287.03) 
[Fri Jun 21 03:20:02 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:20:26 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:20:27 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Fri Jun 21 03:20:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Fri Jun 21 03:42:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 03:42:12 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:24 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:24 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 66.00
[Fri Jun 21 03:43:24 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51_bgd.pi.gz = 37.00
[Fri Jun 21 03:43:25 2013] Got source and background scale factors 1334696.000000, 1632965.000000
[Fri Jun 21 03:43:25 2013] User source parameters:
  Position = (285.0, 347.2) = 18 49 28.52 -0 52 20.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35.8 +/- 9.2
  Background aperture counts = 30.2
  Rate = 0.009 +/- 0.002

[Fri Jun 21 03:43:25 2013] Updating counts from extracted products
[Fri Jun 21 03:43:25 2013] Set source signif. to 35.76/5.50 = 6.50
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete