[Thu Jun 20 10:07:56 2013] Detection parameters:
  Position = (447.3, 318.2) = 18 48 41.44 -0 54 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.8 +/- 15.5
  Background counts = 29.8
  Rate = 0.007 +/- 0.0009

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 10.88'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.719
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.87"
[Thu Jun 20 18:55:10 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 20 18:55:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src5.csv
[Thu Jun 20 18:55:10 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 20 18:55:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src5.csv
[Thu Jun 20 18:55:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 20 18:55:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 5 centroid is now closest to src. 3
[Thu Jun 20 18:55:40 2013] Source 5 is offset by 3.105991 and 4.769591 pixels which is larger than
2 X fitted extent = 1.310993 x 1.310993, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 7
[Thu Jun 20 18:55:40 2013] Source is confused with source 26
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.719
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.87"
[Fri Jun 21 03:02:02 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 21 03:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 21 03:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 21 03:02:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 21 03:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 21 03:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 21 03:02:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:43 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Fri Jun 21 03:02:43 2013] Source 5 is offset by -0.337250 and -2.341733 pixels which is larger than
2 X fitted extent = 1.371154 x 1.371154, not incorporating fit results
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:02:58 2013] XMMSAS src. selection expression = ellipse(38863.649200, 27631.067200, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 21 03:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (410, 281) - (485, 356)
[Fri Jun 21 03:02:58 2013] XMMSAS bgd. selection expression = annulus(38863.649200, 27631.067200, 1087.500000, 2175.000000, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38807.130000, 28549.490000, 1864.352054, 1864.352054, 0.000000, X, Y) && !ellipse(37176.351532, 27409.058960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40034.798553, 25625.442139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41123.097717, 25260.611908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38893.186000, 29886.760000, 1601.632046, 1601.632046, 0.000000, X, Y) && !ellipse(37753.995636, 29450.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38401.690033, 25879.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37959.656860, 30313.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39362.292908, 30307.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.594543, 30402.198273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38569.036530, 30404.869232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38680.798000, 29885.251800, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37027.383148, 29435.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.206970, 28066.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.081268, 26565.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.716919, 26753.880035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39803.842865, 25193.200714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40440.376000, 25248.206000, 1356.456039, 1356.456039, 0.000000, X, Y) && !ellipse(37529.401398, 25201.818939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39554.960419, 25354.833588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39798.178000, 30971.278000, 1351.736039, 1351.736039, 0.000000, X, Y) && !ellipse(36470.106000, 29640.331000, 1324.864038, 1324.864038, 0.000000, X, Y) && !ellipse(36719.837830, 28852.016937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.412000, 28214.572000, 1683.216048, 1683.216048, 0.000000, X, Y) && !ellipse(36169.967987, 27303.577301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36771.857819, 26617.228333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37349.474400, 25891.922000, 1745.088050, 1745.088050, 0.000000, X, Y) && !ellipse(37688.798737, 25906.941620, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5.gif
[Fri Jun 21 03:05:04 2013] Mean detx,y = (12630.93, -7470.14) 
[Fri Jun 21 03:05:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:05:24 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:05:25 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 21 03:05:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 21 03:41:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 03:41:51 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:17 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:17 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 14.00
[Fri Jun 21 03:43:17 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 1.00
[Fri Jun 21 03:43:17 2013] Got source and background scale factors 742372.000000, 60207.000000
[Fri Jun 21 03:43:17 2013] User source parameters:
  Position = (447.3, 318.2) = 18 48 41.44 -0 54 31.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1.7 +/- 4.8
  Background aperture counts = 12.3
  Rate = 0.0004 +/- 0.001

[Fri Jun 21 03:43:17 2013] Updating counts from extracted products
[Fri Jun 21 03:43:17 2013] Set source signif. to 1.67/3.51 = 0.48
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete