[Thu Jun 20 10:07:58 2013] Detection parameters:
  Position = (430.2, 361.9) = 18 48 46.39 -0 51 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.1 +/- 16.0
  Background counts = 59.2
  Rate = 0.004 +/- 0.0009

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 10.60'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 11.73"
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src43.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src43.csv
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src43.csv
[Thu Jun 20 18:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jun 20 18:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 43 centroid is now closest to src. 36
[Thu Jun 20 18:55:40 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 14.293638 pixels away
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 45
[Thu Jun 20 18:55:40 2013] Source is confused with source 46
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.881
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 11.73"
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src36.ximg exists
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src36_1.ximg exists
[Fri Jun 21 03:02:04 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src36 appears to have run properly
[Fri Jun 21 03:02:07 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Fri Jun 21 03:02:07 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Jun 21 03:02:07 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Jun 21 03:02:43 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 15.483259 pixels away
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:03:00 2013] XMMSAS src. selection expression = ellipse(37378.678040, 31434.420563, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:03:00 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43_src.reg
[Fri Jun 21 03:03:00 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (393, 324) - (468, 399)
[Fri Jun 21 03:03:00 2013] XMMSAS bgd. selection expression = annulus(37378.678040, 31434.420563, 1087.500000, 2175.000000, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38807.130000, 28549.490000, 1864.352054, 1864.352054, 0.000000, X, Y) && !ellipse(38893.186000, 29886.760000, 1601.632046, 1601.632046, 0.000000, X, Y) && !ellipse(37753.995636, 29450.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37959.656860, 30313.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39362.292908, 30307.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.594543, 30402.198273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38569.036530, 30404.869232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38680.798000, 29885.251800, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37027.383148, 29435.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38552.726685, 31452.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39147.105438, 31528.982086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39632.951904, 31735.941620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39798.178000, 30971.278000, 1351.736039, 1351.736039, 0.000000, X, Y) && !ellipse(37682.585968, 30916.031403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36470.106000, 29640.331000, 1324.864038, 1324.864038, 0.000000, X, Y) && !ellipse(36719.837830, 28852.016937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.412000, 28214.572000, 1683.216048, 1683.216048, 0.000000, X, Y)
[Fri Jun 21 03:03:00 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43.gif
[Fri Jun 21 03:17:28 2013] Mean detx,y = (10226.08, -10431.56) 
[Fri Jun 21 03:17:30 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:17:43 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:17:43 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 21 03:17:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jun 21 03:42:09 2013] Not generating rmf since there are only 68 counts
[Fri Jun 21 03:42:09 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:23 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:23 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 25.00
[Fri Jun 21 03:43:23 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43_bgd.pi.gz = 88.00
[Fri Jun 21 03:43:23 2013] Got source and background scale factors 1328000.000000, 5240000.000000
[Fri Jun 21 03:43:24 2013] User source parameters:
  Position = (430.2, 361.9) = 18 48 46.39 -0 51 17.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2.7 +/- 6.1
  Background aperture counts = 22.3
  Rate = 0.0006 +/- 0.001

[Fri Jun 21 03:43:24 2013] Updating counts from extracted products
[Fri Jun 21 03:43:24 2013] Set source signif. to 2.70/4.72 = 0.57
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete