[Thu Jun 20 10:07:58 2013] Detection parameters:
  Position = (308.6, 201.4) = 18 49 21.67 -1 3 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.2 +/- 14.8
  Background counts = 83.8
  Rate = 0.004 +/- 0.0009

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 7.07'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 9.97"
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src40.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src40.csv
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src40.csv
[Thu Jun 20 18:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jun 20 18:55:15 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Jun 20 18:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jun 20 18:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 40 centroid is now closest to src. 76
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.770
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 9.97"
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src33.ximg exists
[Fri Jun 21 03:02:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src33.csv
[Fri Jun 21 03:02:04 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Jun 21 03:02:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src33.csv
[Fri Jun 21 03:02:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:07 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Jun 21 03:02:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Jun 21 03:02:07 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Jun 21 03:02:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Jun 21 03:02:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:43 2013] Source 40 is offset by -6.067115 and -1.038307 pixels which is larger than
2 X fitted extent = 1.145480 x 1.145480, not incorporating fit results
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:03:00 2013] XMMSAS src. selection expression = ellipse(26796.241028, 17472.287903, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:03:00 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40_src.reg
[Fri Jun 21 03:03:00 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (271, 164) - (346, 239)
[Fri Jun 21 03:03:00 2013] XMMSAS bgd. selection expression = annulus(26796.241028, 17472.287903, 1087.500000, 2175.000000, X, Y) && !ellipse(26086.049896, 18872.984451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.870000, 18476.192200, 1549.016045, 539.133616, 21.631900, X, Y)
[Fri Jun 21 03:03:00 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40.gif
[Fri Jun 21 03:15:35 2013] Mean detx,y = (4751.32, 6052.34) 
[Fri Jun 21 03:15:38 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:16:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:16:12 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Fri Jun 21 03:16:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Fri Jun 21 03:42:08 2013] Not generating rmf since there are only 74 counts
[Fri Jun 21 03:42:08 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:23 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:23 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 38.00
[Fri Jun 21 03:43:23 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40_bgd.pi.gz = 190.00
[Fri Jun 21 03:43:23 2013] Got source and background scale factors 1187494.000000, 6997401.000000
[Fri Jun 21 03:43:23 2013] User source parameters:
  Position = (308.6, 201.4) = 18 49 21.67 -1 3 4.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5.8 +/- 7.2
  Background aperture counts = 32.2
  Rate = 0.001 +/- 0.002

[Fri Jun 21 03:43:23 2013] Updating counts from extracted products
[Fri Jun 21 03:43:23 2013] Set source signif. to 5.76/5.68 = 1.01
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete