[Thu Jun 20 10:07:56 2013] Detection parameters:
  Position = (450.4, 329.1) = 18 48 40.55 -0 53 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.3 +/- 15.8
  Background counts = 23.0
  Rate = 0.008 +/- 0.0009

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 11.24'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 12.05"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.8, npix_max = 42, mask sum = 37, frac = 0.865
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.05"
[Thu Jun 20 18:55:10 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 20 18:55:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 18:55:10 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 20 18:55:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src3.csv
[Thu Jun 20 18:55:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 20 18:55:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 3 centroid is now closest to src. 24
[Thu Jun 20 18:55:40 2013] Spatial fit model total counts = -36.283900, observed total counts = 27.000000
[Thu Jun 20 18:55:40 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 18:55:40 2013] Source 3 is offset by -5.066790 and -5.172636 pixels which is larger than
2 X fitted extent = 1.407522 x 1.407522, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 1
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 12.05"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.8, npix_max = 42, mask sum = 37, frac = 0.865
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.05"
[Fri Jun 21 03:02:02 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 21 03:02:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 03:02:02 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 21 03:02:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 03:02:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 21 03:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 21 03:02:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 03:02:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:43 2013] Warning, spatial fit 2 centroid is now closest to src. 7
[Fri Jun 21 03:02:43 2013] Spatial fit model total counts = 46.345000, observed total counts = 44.000000
[Fri Jun 21 03:02:43 2013] Offset between fit and detection position for source 3 = 3.768057 pixels
[Fri Jun 21 03:02:43 2013] Warning, changing simple spatial fit ID from 2 to 5
[Fri Jun 21 03:02:43 2013] 40.374900 total counts/ 23.058000 bgd. counts: snr = 3.606279
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.768057 pixels
  Position = (446.6, 328.7) = 18 48 41.63 -0 53 42.1
  Extent = 23.3 (23.3-46.6)", rotation angle = 0
  Source counts = 17.3 +/- 6.4
  Background counts = 23.1
  Rate = 0.004 +/- 0.002
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:02:57 2013] XMMSAS src. selection expression = ellipse(38807.130000, 28549.490000, 1398.264040, 1398.264040, 0.000000, X, Y)
[Fri Jun 21 03:02:57 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 21 03:02:57 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (366, 248) - (527, 409)
[Fri Jun 21 03:02:58 2013] XMMSAS bgd. selection expression = annulus(38807.130000, 28549.490000, 2330.440067, 4660.880134, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38863.649200, 27631.067200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.351532, 27409.058960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40034.798553, 25625.442139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41123.097717, 25260.611908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38893.186000, 29886.760000, 1601.632046, 1601.632046, 0.000000, X, Y) && !ellipse(37753.995636, 29450.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38401.690033, 25879.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37959.656860, 30313.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39362.292908, 30307.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.594543, 30402.198273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38569.036530, 30404.869232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38680.798000, 29885.251800, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37027.383148, 29435.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.206970, 28066.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.081268, 26565.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.716919, 26753.880035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39803.842865, 25193.200714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40440.376000, 25248.206000, 1356.456039, 1356.456039, 0.000000, X, Y) && !ellipse(37529.401398, 25201.818939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38552.726685, 31452.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39554.960419, 25354.833588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39147.105438, 31528.982086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39632.951904, 31735.941620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39798.178000, 30971.278000, 1351.736039, 1351.736039, 0.000000, X, Y) && !ellipse(37378.678040, 31434.420563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37682.585968, 30916.031403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36470.106000, 29640.331000, 1324.864038, 1324.864038, 0.000000, X, Y) && !ellipse(36719.837830, 28852.016937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.412000, 28214.572000, 1683.216048, 1683.216048, 0.000000, X, Y) && !ellipse(36169.967987, 27303.577301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36771.857819, 26617.228333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37349.474400, 25891.922000, 1745.088050, 1745.088050, 0.000000, X, Y) && !ellipse(37688.798737, 25906.941620, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3.gif
[Fri Jun 21 03:04:00 2013] Mean detx,y = (12161.27, -8261.01) 
[Fri Jun 21 03:04:02 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:04:59 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:05:00 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 21 03:05:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 21 03:41:51 2013] Not generating rmf since there are only 17 counts
[Fri Jun 21 03:41:51 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:17 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:17 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 95.00
[Fri Jun 21 03:43:17 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 198.00
[Fri Jun 21 03:43:17 2013] Got source and background scale factors 4239827.000000, 9699105.000000
[Fri Jun 21 03:43:17 2013] User source parameters:
  Position = (446.6, 328.7) = 18 48 41.63 -0 53 42.1
  Extent = 23.3 (23.3-46.6)", rotation angle = 0
  Source aperture counts = 8.4 +/- 10.8
  Background aperture counts = 86.6
  Rate = 0.002 +/- 0.003

[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Jun 21 03:43:36 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Fri Jun 21 03:43:36 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Jun 21 03:43:36 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete