[Thu Jun 20 10:07:57 2013] Detection parameters:
  Position = (448.0, 305.9) = 18 48 41.24 -0 55 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.4 +/- 14.6
  Background counts = 36.2
  Rate = 0.005 +/- 0.0008

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 10.85'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.86"
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src29.csv
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src29.csv
[Thu Jun 20 18:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:14 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 20 18:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 18:55:14 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 20 18:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 18:55:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Source 29 is offset by 1.037159 and -4.632496 pixels which is larger than
2 X fitted extent = 1.362768 x 1.362768, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 8
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 11.86"
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src22.ximg exists
[Fri Jun 21 03:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src22.csv
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src22_1.ximg exists
[Fri Jun 21 03:02:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src22.csv
[Fri Jun 21 03:02:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:06 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Fri Jun 21 03:02:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 21 03:02:06 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Fri Jun 21 03:02:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Fri Jun 21 03:02:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:02:43 2013] Warning, spatial fit 22 centroid is now closest to src. 15
[Fri Jun 21 03:02:43 2013] Source 29 is offset by 5.307371 and -3.517002 pixels which is larger than
2 X fitted extent = 1.302772 x 1.302772, not incorporating fit results
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:02:59 2013] XMMSAS src. selection expression = ellipse(38925.081268, 26565.250824, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:02:59 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29_src.reg
[Fri Jun 21 03:02:59 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (410, 268) - (485, 343)
[Fri Jun 21 03:02:59 2013] XMMSAS bgd. selection expression = annulus(38925.081268, 26565.250824, 1087.500000, 2175.000000, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38807.130000, 28549.490000, 1864.352054, 1864.352054, 0.000000, X, Y) && !ellipse(38863.649200, 27631.067200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.351532, 27409.058960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40034.798553, 25625.442139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41123.097717, 25260.611908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38893.186000, 29886.760000, 1601.632046, 1601.632046, 0.000000, X, Y) && !ellipse(37753.995636, 29450.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38401.690033, 25879.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38680.798000, 29885.251800, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37027.383148, 29435.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.206970, 28066.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.716919, 26753.880035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39803.842865, 25193.200714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40440.376000, 25248.206000, 1356.456039, 1356.456039, 0.000000, X, Y) && !ellipse(37529.401398, 25201.818939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39554.960419, 25354.833588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36470.106000, 29640.331000, 1324.864038, 1324.864038, 0.000000, X, Y) && !ellipse(36719.837830, 28852.016937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.412000, 28214.572000, 1683.216048, 1683.216048, 0.000000, X, Y) && !ellipse(36169.967987, 27303.577301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36771.857819, 26617.228333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37349.474400, 25891.922000, 1745.088050, 1745.088050, 0.000000, X, Y) && !ellipse(37688.798737, 25906.941620, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 03:02:59 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29.gif
[Fri Jun 21 03:12:12 2013] Mean detx,y = (13366.86, -6358.19) 
[Fri Jun 21 03:12:15 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:12:26 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:12:26 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Jun 21 03:12:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Jun 21 03:42:02 2013] Not generating rmf since there are only 86 counts
[Fri Jun 21 03:42:02 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:21 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:21 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 21.00
[Fri Jun 21 03:43:21 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29_bgd.pi.gz = 6.00
[Fri Jun 21 03:43:21 2013] Got source and background scale factors 1170802.000000, 259542.000000
[Fri Jun 21 03:43:21 2013] User source parameters:
  Position = (448.0, 305.9) = 18 48 41.24 -0 55 20.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -6.1 +/- 5.7
  Background aperture counts = 27.1
  Rate = -0.001 +/- 0.001

[Fri Jun 21 03:43:21 2013] Updating counts from extracted products
[Fri Jun 21 03:43:21 2013] Set source signif. to -6.07/5.20 = -1.17
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete