[Thu Jun 20 10:07:57 2013] Detection parameters:
  Position = (443.9, 350.0) = 18 48 42.43 -0 52 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 17.2
  Background counts = 32.6
  Rate = 0.006 +/- 0.001

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 11.19'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.02"
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 18:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:14 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 20 18:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 18:55:14 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 20 18:55:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 18:55:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Spatial fit model total counts = 4.611320, observed total counts = 36.000000
[Thu Jun 20 18:55:40 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 21 centroid is now closest to src. 14
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 17
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 12.02 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 12.02"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.845
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 12.02"
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jun 21 03:02:03 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src16 appears to have run properly
[Fri Jun 21 03:02:06 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jun 21 03:02:06 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jun 21 03:02:06 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jun 21 03:02:43 2013] Warning, spatial fit 16 centroid is now closest to src. 14
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:02:58 2013] XMMSAS src. selection expression = ellipse(38569.036530, 30404.869232, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21_src.reg
[Fri Jun 21 03:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (406, 313) - (481, 388)
[Fri Jun 21 03:02:58 2013] XMMSAS bgd. selection expression = annulus(38569.036530, 30404.869232, 1087.500000, 2175.000000, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38807.130000, 28549.490000, 1864.352054, 1864.352054, 0.000000, X, Y) && !ellipse(38863.649200, 27631.067200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37176.351532, 27409.058960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38893.186000, 29886.760000, 1601.632046, 1601.632046, 0.000000, X, Y) && !ellipse(37753.995636, 29450.826935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37959.656860, 30313.270721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39362.292908, 30307.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37315.594543, 30402.198273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38680.798000, 29885.251800, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37027.383148, 29435.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.206970, 28066.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38552.726685, 31452.464142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39147.105438, 31528.982086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39632.951904, 31735.941620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39798.178000, 30971.278000, 1351.736039, 1351.736039, 0.000000, X, Y) && !ellipse(37378.678040, 31434.420563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37682.585968, 30916.031403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36470.106000, 29640.331000, 1324.864038, 1324.864038, 0.000000, X, Y) && !ellipse(36719.837830, 28852.016937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36654.412000, 28214.572000, 1683.216048, 1683.216048, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21.gif
[Fri Jun 21 03:09:19 2013] Mean detx,y = (11865.08, -9898.85) 
[Fri Jun 21 03:09:21 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:09:33 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:09:33 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Fri Jun 21 03:09:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Fri Jun 21 03:41:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 03:41:58 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:19 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:19 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 26.00
[Fri Jun 21 03:43:20 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21_bgd.pi.gz = 9.00
[Fri Jun 21 03:43:20 2013] Got source and background scale factors 1330380.000000, 403203.000000
[Fri Jun 21 03:43:20 2013] User source parameters:
  Position = (443.9, 350.0) = 18 48 42.43 -0 52 5.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -3.7 +/- 6.2
  Background aperture counts = 29.7
  Rate = -0.0009 +/- 0.001

[Fri Jun 21 03:43:20 2013] Updating counts from extracted products
[Fri Jun 21 03:43:20 2013] Set source signif. to -3.70/5.45 = -0.68
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete