[Thu Jun 20 10:07:56 2013] Detection parameters:
  Position = (473.2, 290.9) = 18 48 33.91 -0 56 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 14.9
  Background counts = 35.8
  Rate = 0.005 +/- 0.0009

[Thu Jun 20 10:08:00 2013] Off-axis axis estimate = 12.68'
[Thu Jun 20 10:09:37 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 10:09:37 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 20 10:09:37 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Thu Jun 20 10:09:37 2013] source mask rpix=2.9, npix_max = 47, mask sum = 44, frac = 0.932
[Thu Jun 20 10:09:37 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.77"
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src10.csv
[Thu Jun 20 18:55:11 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jun 20 18:55:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src10.csv
[Thu Jun 20 18:55:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Jun 20 18:55:13 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jun 20 18:55:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Jun 20 18:55:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073740201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 18:55:40 2013] Warning, spatial fit 10 centroid is now closest to src. 35
[Thu Jun 20 18:55:40 2013] Source 10 is offset by -3.798394 and -3.125817 pixels which is larger than
2 X fitted extent = 1.441894 x 1.441894, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Source 10 is offset by 2.551275 and 4.758827 pixels which is larger than
2 X fitted extent = 2.666731 x 2.666731, not incorporating fit results
[Thu Jun 20 18:55:40 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 18:55:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 18:55:40 2013] Assessing source extent using major
[Thu Jun 20 18:55:40 2013] Source does appear to be extended
[Thu Jun 20 18:55:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 18:55:40 2013] Source is confused with source 32
[Thu Jun 20 18:55:49 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 18:55:49 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Thu Jun 20 18:55:49 2013] source mask rpix=2.9, npix_max = 47, mask sum = 44, frac = 0.932
[Thu Jun 20 18:55:49 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 12.77"
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 21 03:02:03 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 21 03:02:03 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 21 03:02:05 2013] fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 21 03:02:05 2013] Fit fullrun_mos2_xmm0073740201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jun 21 03:02:43 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.237061 pixels away
[Fri Jun 21 03:02:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:02:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:02:44 2013] Assessing source extent using major
[Fri Jun 21 03:02:44 2013] Source does appear to be extended
[Fri Jun 21 03:02:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 03:02:58 2013] XMMSAS src. selection expression = ellipse(41123.097717, 25260.611908, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing source region out to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 21 03:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0073740201_pi300-10000_cl_sm2.00.img.gz, (436, 253) - (511, 328)
[Fri Jun 21 03:02:58 2013] XMMSAS bgd. selection expression = annulus(41123.097717, 25260.611908, 1087.500000, 2175.000000, X, Y) && !ellipse(38491.152000, 28474.874000, 1648.464047, 1648.464047, 0.000000, X, Y) && !ellipse(38807.130000, 28549.490000, 1864.352054, 1864.352054, 0.000000, X, Y) && !ellipse(38863.649200, 27631.067200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40034.798553, 25625.442139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38401.690033, 25879.148773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.206970, 28066.462799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38925.081268, 26565.250824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39803.842865, 25193.200714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40440.376000, 25248.206000, 1356.456039, 1356.456039, 0.000000, X, Y) && !ellipse(39554.960419, 25354.833588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37349.474400, 25891.922000, 1745.088050, 1745.088050, 0.000000, X, Y)
[Fri Jun 21 03:02:58 2013] Writing fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10.gif
[Fri Jun 21 03:06:26 2013] Mean detx,y = (15669.62, -5548.69) 
[Fri Jun 21 03:06:28 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 03:06:53 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 03:06:53 2013] Setting source spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 21 03:06:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 21 03:41:53 2013] Not generating rmf since there are only 94 counts
[Fri Jun 21 03:41:53 2013] rmf not generated due to insufficient counts
[Fri Jun 21 03:43:18 2013] Updating aperture counts using extracted products
[Fri Jun 21 03:43:18 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 16.00
[Fri Jun 21 03:43:18 2013] Total counts from fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 27.00
[Fri Jun 21 03:43:18 2013] Got source and background scale factors 893538.000000, 1416690.000000
[Fri Jun 21 03:43:18 2013] User source parameters:
  Position = (473.2, 290.9) = 18 48 33.91 -0 56 25.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -1.0 +/- 5.1
  Background aperture counts = 17.0
  Rate = -0.0002 +/- 0.001

[Fri Jun 21 03:43:18 2013] Updating counts from extracted products
[Fri Jun 21 03:43:18 2013] Set source signif. to -1.03/4.13 = -0.25
[Fri Jun 21 03:43:34 2013] No arf file for this source, not re-computing flux
[Fri Jun 21 03:43:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 03:43:37 2013] xmm0073740201/analysis//spectral/fullrun_mos2_xmm0073740201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete