[Sat Jun 23 20:58:27 2012] Detection parameters:
  Position = (294.2, 296.9) = 10 13 40.71 -45 6 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.0 +/- 12.4
  Background counts = 26.4
  Rate = 0.004 +/- 0.0008

[Sat Jun 23 20:58:28 2012] Off-axis axis estimate = 0.32'
[Sat Jun 23 21:00:26 2012] Using EEF radius (= 6.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:00:26 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Sat Jun 23 21:00:26 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Sat Jun 23 21:00:26 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 6.59"
[Sat Jun 23 21:48:29 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun 23 21:48:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_src25.csv
[Sat Jun 23 21:48:29 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun 23 21:48:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_src25.csv
[Sat Jun 23 21:48:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 21:48:29 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun 23 21:48:29 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun 23 21:48:29 2012] Fit fullrun_pn_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jun 23 23:00:59 2012] Source 27 is offset by -5.559430 and 0.799638 pixels which is larger than
2 X fitted extent = 1.532405 x 1.532405, not incorporating fit results
[Sat Jun 23 23:00:59 2012] Source 27 is offset by -4.763154 and 1.863594 pixels which is larger than
2 X fitted extent = 6.257793 x 0.782225, not incorporating fit results
[Sat Jun 23 23:00:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:00:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:00:59 2012] Assessing source extent using major
[Sat Jun 23 23:00:59 2012] Source does appear to be extended
[Sat Jun 23 23:00:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 23:00:59 2012] Source is confused with source 26
[Sat Jun 23 23:01:18 2012] Using EEF radius (= 6.59 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 23:01:18 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Sat Jun 23 23:01:18 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Sat Jun 23 23:01:18 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 6.59"
[Sat Jun 23 23:41:08 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_src23.ximg exists
[Sat Jun 23 23:41:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_src23.csv
[Sat Jun 23 23:41:08 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Jun 23 23:41:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_src23.csv
[Sat Jun 23 23:41:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:41:08 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Jun 23 23:41:08 2012] fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Jun 23 23:41:08 2012] Fit fullrun_pn_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Jun 24 00:51:49 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.877053 pixels away
[Sun Jun 24 00:51:49 2012] Source 27 is offset by -5.433981 and 0.883806 pixels which is larger than
2 X fitted extent = 1.288166 x 1.288166, not incorporating fit results
[Sun Jun 24 00:51:49 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 00:51:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 00:51:49 2012] Assessing source extent using major
[Sun Jun 24 00:51:49 2012] Source does appear to be extended
[Sun Jun 24 00:51:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 00:52:03 2012] XMMSAS src. selection expression = ellipse(25548.597626, 25785.776703, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 00:52:03 2012] Writing source region out to fullrun_pn_xmm0073340201_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun 24 00:52:03 2012] Extracting stamp from image fullrun_pn_xmm0073340201_pi300-10000_cl_sm2.00.img.gz, (257, 259) - (332, 334)
[Sun Jun 24 00:52:03 2012] XMMSAS bgd. selection expression = annulus(25548.597626, 25785.776703, 1087.500000, 2175.000000, X, Y) && !ellipse(24822.664825, 25877.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26304.302400, 25856.952000, 1059.416030, 572.527216, 134.587000, X, Y) && !ellipse(25465.893463, 25130.953552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23102.269562, 23973.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24360.541046, 23280.045013, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 00:52:03 2012] Writing fullrun_pn_xmm0073340201_pi300-10000_pass1_cl_src27.gif
[Sun Jun 24 01:05:09 2012] Mean detx,y = (-1429.68, 1561.50) 
[Sun Jun 24 01:05:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 01:05:30 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 01:05:30 2012] Setting source spectrum file to fullrun_pn_xmm0073340201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 01:05:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0073340201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun 24 01:23:31 2012] Not generating rmf since there are only 59 counts
[Sun Jun 24 01:23:31 2012] rmf not generated due to insufficient counts
[Sun Jun 24 01:42:08 2012] Updating aperture counts using extracted products
[Sun Jun 24 01:42:08 2012] Error reading totcts from fullrun_pn_xmm0073340201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun 24 01:42:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 01:42:08 2012] Using photon index=1.80, rate=0.00375, arf fullrun_pn_xmm0073340201_pi300-10000_pass1_cl_src27.arf
[Sun Jun 24 01:42:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 01:42:08 2012] Updating source flux to 1.1e-14
[Sun Jun 24 01:42:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting