[Sat Jun 23 20:59:16 2012] Detection parameters:
  Position = (456.7, 270.5) = 10 12 33.93 -45 8 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.5 +/- 8.2
  Background counts = 6.0
  Rate = 0.002 +/- 0.0004

[Sat Jun 23 20:59:16 2012] Off-axis axis estimate = 11.65'
[Sat Jun 23 22:20:42 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 22:20:42 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Sat Jun 23 22:20:42 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.113
[Sat Jun 23 22:20:42 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 12.25"
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src29.ximg exists
[Sat Jun 23 23:00:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src29.csv
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src29_1.ximg exists
[Sat Jun 23 23:00:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src29.csv
[Sat Jun 23 23:00:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sat Jun 23 23:00:51 2012] Fit fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Jun 23 23:01:08 2012] Spatial fit model total counts = 81.066400, observed total counts = 82.000000
[Sat Jun 23 23:01:08 2012] Offset between fit and detection position for source 26 = 0.596111 pixels
[Sat Jun 23 23:01:08 2012] 81.219300 total counts/ 47.511100 bgd. counts: snr = 4.890328
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.596111 pixels
  Position = (456.2, 270.2) = 10 12 34.12 -45 8 11.3
  Extent = 8.8 (6.6-12.2)", rotation angle = 0
  Source counts = 33.7 +/- 9.0
  Background counts = 47.5
  Rate = 0.002 +/- 0.0004
[Sat Jun 23 23:01:08 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:01:08 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 23:01:08 2012] Source does appear to be extended
[Sat Jun 23 23:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 00:10:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 00:10:58 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Sun Jun 24 00:10:58 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.989
[Sun Jun 24 00:10:58 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.76"
[Sun Jun 24 00:51:42 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun 24 00:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src27.csv
[Sun Jun 24 00:51:42 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun 24 00:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src27.csv
[Sun Jun 24 00:51:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 00:51:43 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun 24 00:51:43 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun 24 00:51:43 2012] Fit fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Jun 24 00:51:54 2012] Warning, spatial fit 27 centroid is now closest to src. 28
[Sun Jun 24 00:51:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 00:51:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 00:51:54 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 00:51:54 2012] Source does appear to be extended
[Sun Jun 24 00:51:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 01:32:40 2012] XMMSAS src. selection expression = ellipse(39641.987600, 23455.850200, 525.615615, 525.615615, 0.000000, X, Y)
[Sun Jun 24 01:32:40 2012] Writing source region out to fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26_src.reg
[Sun Jun 24 01:32:40 2012] Extracting stamp from image fullrun_mos2_xmm0073340201_pi300-10000_cl_sm2.00.img.gz, (426, 240) - (486, 300)
[Sun Jun 24 01:32:40 2012] XMMSAS bgd. selection expression = annulus(39641.987600, 23455.850200, 876.026025, 1752.052050, X, Y)
[Sun Jun 24 01:32:40 2012] Writing fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26.gif
[Sun Jun 24 01:38:00 2012] Mean detx,y = (-11051.60, -8318.83) 
[Sun Jun 24 01:38:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 01:38:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 01:38:14 2012] Setting source spectrum file to fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 24 01:38:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Jun 24 01:41:15 2012] Not generating rmf since there are only 33 counts
[Sun Jun 24 01:41:15 2012] rmf not generated due to insufficient counts
[Sun Jun 24 01:42:09 2012] Updating aperture counts using extracted products
[Sun Jun 24 01:42:09 2012] Error reading totcts from fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Jun 24 01:42:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 01:42:10 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26.arf
[Sun Jun 24 01:42:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 01:42:10 2012] Updating source flux to 3.5e-14
[Sun Jun 24 01:42:12 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 24 01:42:13 2012] xmm0073340201/analysis//spectral/fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete