[Sat Jun 23 20:59:16 2012] Detection parameters:
  Position = (427.3, 165.3) = 10 12 45.88 -45 15 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.5 +/- 9.8
  Background counts = 5.3
  Rate = 0.003 +/- 0.0005

[Sat Jun 23 20:59:16 2012] Off-axis axis estimate = 13.43'
[Sat Jun 23 22:20:42 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 22:20:42 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Sat Jun 23 22:20:42 2012] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.746
[Sat Jun 23 22:20:42 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 13.15"
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src15.ximg exists
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Jun 23 23:00:51 2012] Fit fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_src15 appears to have run properly
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Jun 23 23:00:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun 23 23:00:51 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jun 23 23:00:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sat Jun 23 23:00:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:01:08 2012] Source 24 is offset by 7.442974 and 6.416653 pixels which is larger than
2 X fitted extent = 0.890184 x 0.890184, not incorporating fit results
[Sat Jun 23 23:01:08 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:01:08 2012] Assessing source extent using major
[Sat Jun 23 23:01:08 2012] Source does appear to be extended
[Sat Jun 23 23:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 00:10:58 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 00:10:58 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Sun Jun 24 00:10:58 2012] source mask rpix=3.0, npix_max = 49, mask sum = 37, frac = 0.746
[Sun Jun 24 00:10:58 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 13.15"
[Sun Jun 24 00:51:42 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 24 00:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src14.csv
[Sun Jun 24 00:51:42 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 24 00:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src14.csv
[Sun Jun 24 00:51:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 00:51:42 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 24 00:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 24 00:51:42 2012] fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 24 00:51:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 24 00:51:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 00:51:54 2012] Spatial fit model total counts = 149.441000, observed total counts = 116.000000
[Sun Jun 24 00:51:54 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 24 00:51:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 00:51:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 00:51:54 2012] Assessing source extent using major
[Sun Jun 24 00:51:54 2012] Source does appear to be extended
[Sun Jun 24 00:51:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 01:32:40 2012] XMMSAS src. selection expression = ellipse(37128.470734, 14332.180771, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 01:32:40 2012] Writing source region out to fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24_src.reg
[Sun Jun 24 01:32:40 2012] Extracting stamp from image fullrun_mos2_xmm0073340201_pi300-10000_cl_sm2.00.img.gz, (390, 128) - (465, 203)
[Sun Jun 24 01:32:40 2012] XMMSAS bgd. selection expression = annulus(37128.470734, 14332.180771, 1087.500000, 2175.000000, X, Y) && !ellipse(37890.416351, 15340.340530, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 01:32:40 2012] Writing fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24.gif
[Sun Jun 24 01:35:31 2012] Mean detx,y = (-5705.32, -16098.88) 
[Sun Jun 24 01:35:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 01:35:42 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 01:35:42 2012] Setting source spectrum file to fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun 24 01:35:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jun 24 01:40:27 2012] Not generating rmf since there are only 61 counts
[Sun Jun 24 01:40:27 2012] rmf not generated due to insufficient counts
[Sun Jun 24 01:42:09 2012] Updating aperture counts using extracted products
[Sun Jun 24 01:42:09 2012] Error reading totcts from fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun 24 01:42:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 01:42:09 2012] Using photon index=1.80, rate=0.00304, arf fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24.arf
[Sun Jun 24 01:42:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 01:42:09 2012] Updating source flux to 1.1e-13
[Sun Jun 24 01:42:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 24 01:42:13 2012] xmm0073340201/analysis//spectral/fullrun_mos2_xmm0073340201_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete