[Sat Jun 23 20:58:50 2012] Detection parameters:
  Position = (305.0, 421.9) = 10 13 36.30 -44 57 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.9 +/- 11.2
  Background counts = 6.7
  Rate = 0.006 +/- 0.0009

[Sat Jun 23 20:58:50 2012] Off-axis axis estimate = 8.96'
[Sat Jun 23 21:48:29 2012] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:48:29 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Sat Jun 23 21:48:29 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Sat Jun 23 21:48:29 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.91"
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 22:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 23 22:20:42 2012] Fit fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 23 23:01:03 2012] Spatial fit model total counts = 124.506000, observed total counts = 125.000000
[Sat Jun 23 23:01:03 2012] Offset between fit and detection position for source 7 = 0.282341 pixels
[Sat Jun 23 23:01:03 2012] 125.639700 total counts/ 66.985300 bgd. counts: snr = 7.166562
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.282341 pixels
  Position = (304.7, 421.8) = 10 13 36.42 -44 57 12.7
  Extent = 6.4 (5.0-7.9)", rotation angle = 0
  Source counts = 58.7 +/- 11.2
  Background counts = 67.0
  Rate = 0.003 +/- 0.0006
[Sat Jun 23 23:01:03 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:01:03 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 23:01:03 2012] Source does appear to be extended
[Sat Jun 23 23:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 23:41:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 23:41:08 2012] Initial guess for spatial extent in simple fitting = 6.43"
[Sat Jun 23 23:41:08 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.022
[Sat Jun 23 23:41:08 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.43"
[Sun Jun 24 00:10:57 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 24 00:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 00:10:57 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 24 00:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src5.csv
[Sun Jun 24 00:10:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 00:10:58 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 24 00:10:58 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 24 00:10:58 2012] Fit fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 24 00:51:51 2012] Warning, spatial fit 5 centroid is now closest to src. 13
[Sun Jun 24 00:51:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 00:51:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 00:51:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 00:51:51 2012] Source does appear to be extended
[Sun Jun 24 00:51:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 01:25:21 2012] XMMSAS src. selection expression = ellipse(26459.594400, 36651.192800, 385.929011, 385.929011, 0.000000, X, Y)
[Sun Jun 24 01:25:21 2012] Writing source region out to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun 24 01:25:21 2012] Extracting stamp from image fullrun_mos1_xmm0073340201_pi300-10000_cl_sm2.00.img.gz, (283, 400) - (327, 444)
[Sun Jun 24 01:25:21 2012] XMMSAS bgd. selection expression = annulus(26459.594400, 36651.192800, 643.215019, 1286.430037, X, Y)
[Sun Jun 24 01:25:21 2012] Writing fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7.gif
[Sun Jun 24 01:26:10 2012] Mean detx,y = (8567.77, 2607.95) 
[Sun Jun 24 01:26:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 01:26:16 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 01:26:16 2012] Setting source spectrum file to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 24 01:26:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 24 01:30:50 2012] Not generating rmf since there are only 58 counts
[Sun Jun 24 01:30:50 2012] rmf not generated due to insufficient counts
[Sun Jun 24 01:42:08 2012] Updating aperture counts using extracted products
[Sun Jun 24 01:42:08 2012] Error reading totcts from fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 24 01:42:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 01:42:09 2012] Using photon index=1.80, rate=0.0029, arf fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7.arf
[Sun Jun 24 01:42:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 01:42:09 2012] Updating source flux to 5.1e-14
[Sun Jun 24 01:42:11 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 24 01:42:12 2012] xmm0073340201/analysis//spectral/fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete