[Sat Jun 23 20:58:50 2012] Detection parameters:
  Position = (141.3, 418.7) = 10 14 43.39 -44 57 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.3 +/- 10.4
  Background counts = 4.4
  Rate = 0.004 +/- 0.0005

[Sat Jun 23 20:58:50 2012] Off-axis axis estimate = 14.35'
[Sat Jun 23 21:48:29 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:48:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 21:48:29 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Sat Jun 23 21:48:29 2012] source mask rpix=3.1, npix_max = 52, mask sum = 44, frac = 0.836
[Sat Jun 23 21:48:29 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.60"
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src10.csv
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src10.csv
[Sat Jun 23 22:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 23 22:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:01:03 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.574433 pixels away
[Sat Jun 23 23:01:03 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:01:03 2012] Assessing source extent using major
[Sat Jun 23 23:01:03 2012] Source does appear to be extended
[Sat Jun 23 23:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 23:41:08 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 23:41:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 23:41:08 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Sat Jun 23 23:41:08 2012] source mask rpix=3.1, npix_max = 52, mask sum = 44, frac = 0.836
[Sat Jun 23 23:41:08 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.60"
[Sun Jun 24 00:10:57 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jun 24 00:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 24 00:10:57 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jun 24 00:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src10.csv
[Sun Jun 24 00:10:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 00:10:58 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jun 24 00:10:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 24 00:10:58 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jun 24 00:10:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jun 24 00:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 00:51:51 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.676146 pixels away
[Sun Jun 24 00:51:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 00:51:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 00:51:51 2012] Assessing source extent using major
[Sun Jun 24 00:51:51 2012] Source does appear to be extended
[Sun Jun 24 00:51:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 01:25:22 2012] XMMSAS src. selection expression = ellipse(12240.624359, 36376.489441, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 24 01:25:22 2012] Writing source region out to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 24 01:25:22 2012] Extracting stamp from image fullrun_mos1_xmm0073340201_pi300-10000_cl_sm2.00.img.gz, (104, 381) - (179, 456)
[Sun Jun 24 01:25:22 2012] XMMSAS bgd. selection expression = annulus(12240.624359, 36376.489441, 1087.500000, 2175.000000, X, Y)
[Sun Jun 24 01:25:22 2012] Writing fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6.gif
[Sun Jun 24 01:27:27 2012] Mean detx,y = (12804.18, -10920.80) 
[Sun Jun 24 01:27:28 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 01:27:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 01:27:40 2012] Setting source spectrum file to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 24 01:27:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 24 01:31:24 2012] Not generating rmf since there are only 77 counts
[Sun Jun 24 01:31:24 2012] rmf not generated due to insufficient counts
[Sun Jun 24 01:42:08 2012] Updating aperture counts using extracted products
[Sun Jun 24 01:42:09 2012] Error reading totcts from fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 24 01:42:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 01:42:09 2012] Using photon index=1.80, rate=0.00382, arf fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6.arf
[Sun Jun 24 01:42:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 01:42:09 2012] Updating source flux to 1.5e-13
[Sun Jun 24 01:42:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 24 01:42:12 2012] xmm0073340201/analysis//spectral/fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete