[Sat Jun 23 20:58:50 2012] Detection parameters:
  Position = (124.0, 262.9) = 10 14 50.71 -45 8 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.9 +/- 12.8
  Background counts = 5.1
  Rate = 0.005 +/- 0.0006

[Sat Jun 23 20:58:50 2012] Off-axis axis estimate = 12.91'
[Sat Jun 23 21:48:29 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:48:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 21:48:29 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Sat Jun 23 21:48:29 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.876
[Sat Jun 23 21:48:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.88"
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src6.csv
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src6.csv
[Sat Jun 23 22:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 23 22:20:42 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 23 22:20:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 23 22:20:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073340201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 23:01:03 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.696265 pixels away
[Sat Jun 23 23:01:03 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 23:01:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 23:01:03 2012] Assessing source extent using major
[Sat Jun 23 23:01:03 2012] Source does appear to be extended
[Sat Jun 23 23:01:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 23:41:08 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 23:41:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 23:41:08 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Sat Jun 23 23:41:08 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.876
[Sat Jun 23 23:41:08 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.88"
[Sun Jun 24 00:10:57 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 24 00:10:57 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 24 00:10:57 2012] Fit fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Jun 24 00:10:58 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 24 00:10:58 2012] fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 24 00:10:58 2012] Fit fullrun_mos1_xmm0073340201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jun 24 00:51:51 2012] Spatial fit model total counts = 160.178000, observed total counts = 148.000000
[Sun Jun 24 00:51:51 2012] Offset between fit and detection position for source 1 = 0.294717 pixels
[Sun Jun 24 00:51:51 2012] 159.975200 total counts/ 78.302400 bgd. counts: snr = 9.229749
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.294717 pixels
  Position = (124.3, 262.9) = 10 14 50.59 -45 8 42.7
  Extent = 10.3 (7.5-14.4)", rotation angle = 79 (71-86) degrees
  Source counts = 81.7 +/- 12.6
  Background counts = 78.3
  Rate = 0.004 +/- 0.0006
[Sun Jun 24 00:51:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 00:51:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 00:51:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 00:51:51 2012] Source does appear to be extended
[Sun Jun 24 00:51:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.93
[Sun Jun 24 00:51:51 2012] Source is asymmetric
[Sun Jun 24 01:25:21 2012] XMMSAS src. selection expression = ellipse(10762.268800, 22823.946000, 616.500018, 193.240806, 78.563302, X, Y)
[Sun Jun 24 01:25:21 2012] Writing source region out to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 01:25:21 2012] Extracting stamp from image fullrun_mos1_xmm0073340201_pi300-10000_cl_sm2.00.img.gz, (89, 227) - (160, 298)
[Sun Jun 24 01:25:21 2012] XMMSAS bgd. selection expression = annulus(10762.268800, 22823.946000, 1027.500030, 2055.000059, X, Y)
[Sun Jun 24 01:25:21 2012] Writing fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 01:26:18 2012] Mean detx,y = (549.42, -16701.27) 
[Sun Jun 24 01:26:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 01:26:31 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 01:26:31 2012] Setting source spectrum file to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 01:26:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 01:30:54 2012] Not generating rmf since there are only 81 counts
[Sun Jun 24 01:30:54 2012] rmf not generated due to insufficient counts
[Sun Jun 24 01:42:08 2012] Updating aperture counts using extracted products
[Sun Jun 24 01:42:08 2012] Error reading totcts from fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 01:42:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 01:42:09 2012] Using photon index=1.80, rate=0.00404, arf fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 01:42:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 01:42:09 2012] Updating source flux to 1.9e-13
[Sun Jun 24 01:42:11 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 24 01:42:12 2012] xmm0073340201/analysis//spectral/fullrun_mos1_xmm0073340201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete