[Wed Aug  8 05:53:14 2012] Detection parameters:
  Position = (258.8, 463.2) = 16 5 32.41 33 2 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.3 +/- 14.6
  Background counts = 27.2
  Rate = 0.003 +/- 0.0004

[Wed Aug  8 05:53:14 2012] Off-axis axis estimate = 12.28'
[Wed Aug  8 06:03:06 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 06:03:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 06:03:06 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Wed Aug  8 06:03:06 2012] source mask rpix=2.9, npix_max = 45, mask sum = 48, frac = 1.044
[Wed Aug  8 06:03:06 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.57"
[Wed Aug  8 06:25:35 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_src6.ximg exists
[Wed Aug  8 06:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_src6.csv
[Wed Aug  8 06:25:35 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Aug  8 06:25:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_src6.csv
[Wed Aug  8 06:25:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 06:25:35 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Aug  8 06:25:35 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Aug  8 06:25:35 2012] Fit fullrun_mos2_xmm0073140501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Aug  8 06:25:39 2012] Spatial fit model total counts = 119.138000, observed total counts = 112.000000
[Wed Aug  8 06:25:39 2012] Offset between fit and detection position for source 2 = 0.180070 pixels
[Wed Aug  8 06:25:39 2012] 117.800900 total counts/ 63.975000 bgd. counts: snr = 6.729552
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.180070 pixels
  Position = (258.7, 463.3) = 16 5 32.45 33 2 42.7
  Extent = 5.6 (3.9-6.9)", rotation angle = 0
  Source counts = 53.8 +/- 10.9
  Background counts = 64.0
  Rate = 0.002 +/- 0.0005
[Wed Aug  8 06:25:39 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 06:25:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 06:25:39 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 06:25:39 2012] Source does appear to be extended
[Wed Aug  8 06:25:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 06:36:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 06:36:48 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Wed Aug  8 06:36:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.699
[Wed Aug  8 06:36:48 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.63"
[Wed Aug  8 06:53:22 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_src5.ximg exists
[Wed Aug  8 06:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_src5.csv
[Wed Aug  8 06:53:22 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Aug  8 06:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_src5.csv
[Wed Aug  8 06:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 06:53:22 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Aug  8 06:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Aug  8 06:53:22 2012] fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Aug  8 06:53:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Aug  8 06:53:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073140501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 06:53:26 2012] Warning, spatial fit 5 centroid is now closest to src. 3
[Wed Aug  8 06:53:26 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 06:53:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 06:53:26 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 06:53:26 2012] Source does appear to be extended
[Wed Aug  8 06:53:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 07:02:47 2012] XMMSAS src. selection expression = ellipse(22457.970660, 40258.326800, 337.872010, 337.872010, 0.000000, X, Y)
[Wed Aug  8 07:02:47 2012] Writing source region out to fullrun_mos2_xmm0073140501_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug  8 07:02:47 2012] Extracting stamp from image fullrun_mos2_xmm0073140501_pi300-10000_cl_sm2.00.img.gz, (239, 444) - (278, 483)
[Wed Aug  8 07:02:47 2012] XMMSAS bgd. selection expression = annulus(22457.970660, 40258.326800, 563.120016, 1126.240032, X, Y)
[Wed Aug  8 07:02:47 2012] Writing fullrun_mos2_xmm0073140501_pi300-10000_pass1_cl_src2.gif
[Wed Aug  8 07:03:44 2012] Mean detx,y = (6989.21, -15205.16) 
[Wed Aug  8 07:03:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 07:03:58 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 07:03:58 2012] Setting source spectrum file to fullrun_mos2_xmm0073140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug  8 07:03:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0073140501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Aug  8 07:08:54 2012] Not generating rmf since there are only 53 counts
[Wed Aug  8 07:08:54 2012] rmf not generated due to insufficient counts
[Wed Aug  8 07:10:08 2012] Updating aperture counts using extracted products
[Wed Aug  8 07:10:08 2012] Error reading totcts from fullrun_mos2_xmm0073140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug  8 07:10:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 07:10:09 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos2_xmm0073140501_pi300-10000_pass1_cl_src2.arf
[Wed Aug  8 07:10:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 07:10:09 2012] Updating source flux to 9.7e-14
[Wed Aug  8 07:10:17 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting