[Wed Jul 25 18:38:42 2012] Detection parameters:
  Position = (225.1, 343.8) = 16 5 45.39 32 54 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 19.0
  Background counts = 41.2
  Rate = 0.008 +/- 0.0008

[Wed Jul 25 18:38:42 2012] Off-axis axis estimate = 6.25'
[Wed Jul 25 18:56:44 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 18:56:44 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Jul 25 18:56:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Wed Jul 25 18:56:44 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.56"
[Wed Jul 25 19:15:50 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 25 19:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 19:15:50 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 25 19:15:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 19:15:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 19:15:50 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 25 19:15:50 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 25 19:15:51 2012] Fit fullrun_mos2_xmm0073140301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 25 19:15:56 2012] Spatial fit model total counts = 296.242000, observed total counts = 286.000000
[Wed Jul 25 19:15:56 2012] Offset between fit and detection position for source 5 = 0.346811 pixels
[Wed Jul 25 19:15:56 2012] 297.160000 total counts/ 146.665000 bgd. counts: snr = 12.426786
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.346811 pixels
  Position = (224.7, 343.7) = 16 5 45.51 32 54 3.4
  Extent = 6.9 (5.9-8.0)", rotation angle = 0
  Source counts = 150.5 +/- 17.2
  Background counts = 146.7
  Rate = 0.006 +/- 0.0007
[Wed Jul 25 19:15:56 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 19:15:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 19:15:56 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 19:15:56 2012] Source does appear to be extended
[Wed Jul 25 19:15:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 19:37:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 19:37:35 2012] Initial guess for spatial extent in simple fitting = 6.89"
[Wed Jul 25 19:37:35 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Wed Jul 25 19:37:35 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.89"
[Wed Jul 25 19:52:19 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 25 19:52:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_src3.csv
[Wed Jul 25 19:52:19 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 25 19:52:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_src3.csv
[Wed Jul 25 19:52:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 19:52:19 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 25 19:52:19 2012] fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 25 19:52:19 2012] Fit fullrun_mos2_xmm0073140301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 25 19:52:24 2012] Spatial fit model total counts = 296.164000, observed total counts = 291.000000
[Wed Jul 25 19:52:24 2012] Offset between fit and detection position for source 5 = 0.015273 pixels
[Wed Jul 25 19:52:24 2012] 295.875000 total counts/ 144.529000 bgd. counts: snr = 12.589064
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.015273 pixels
  Position = (224.7, 343.7) = 16 5 45.50 32 54 3.4
  Extent = 7.0 (5.9-7.9)", rotation angle = 0
  Source counts = 151.3 +/- 17.2
  Background counts = 144.5
  Rate = 0.006 +/- 0.0007
[Wed Jul 25 19:52:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 19:52:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 19:52:24 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 19:52:24 2012] Source does appear to be extended
[Wed Jul 25 19:52:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:15:51 2012] XMMSAS src. selection expression = ellipse(19504.393400, 29855.260400, 418.199412, 418.199412, 0.000000, X, Y)
[Wed Jul 25 20:15:51 2012] Writing source region out to fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5_src.reg
[Wed Jul 25 20:15:51 2012] Extracting stamp from image fullrun_mos2_xmm0073140301_pi300-10000_cl_sm2.00.img.gz, (201, 320) - (249, 368)
[Wed Jul 25 20:15:51 2012] XMMSAS bgd. selection expression = annulus(19504.393400, 29855.260400, 696.999020, 1393.998040, X, Y)
[Wed Jul 25 20:15:51 2012] Writing fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5.gif
[Wed Jul 25 20:24:40 2012] Mean detx,y = (-498.72, -8960.31) 
[Wed Jul 25 20:24:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 20:24:53 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 20:24:53 2012] Setting source spectrum file to fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 25 20:24:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jul 25 20:33:10 2012] Updating aperture counts using extracted products
[Wed Jul 25 20:33:10 2012] Error reading totcts from fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jul 25 20:33:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 20:33:10 2012] Using photon index=1.80, rate=0.00585, arf fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5.arf
[Wed Jul 25 20:33:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 20:33:10 2012] Updating source flux to 9.1e-14
[Wed Jul 25 20:33:36 2012] Reading fit data from xmm0073140301/analysis//spectral/fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5_pl.csv
[Wed Jul 25 20:33:36 2012] Spectral fit parameter nH value = 1.65788e+21
[Wed Jul 25 20:33:36 2012] Spectral fit parameter PhoIndex value = 2.47731
[Wed Jul 25 20:33:36 2012] Failed to get F(0.3-8.0) from xmm0073140301/analysis//spectral/fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 20:33:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 20:33:36 2012] Using Nh = 1.7e+21, photon index=2.48, rate=0.00585, arf fullrun_mos2_xmm0073140301_pi300-10000_pass1_cl_src5.arf
[Wed Jul 25 20:33:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 20:33:36 2012] Updating source flux to 7.9e-14