[Wed Jul 25 18:38:22 2012] Detection parameters:
  Position = (318.0, 404.6) = 16 5 13.28 32 58 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.9 +/- 15.5
  Background counts = 39.3
  Rate = 0.003 +/- 0.0005

[Wed Jul 25 18:38:22 2012] Off-axis axis estimate = 7.83'
[Wed Jul 25 18:39:26 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 18:39:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 18:39:26 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Wed Jul 25 18:39:26 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Wed Jul 25 18:39:26 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.34"
[Wed Jul 25 18:56:44 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jul 25 18:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_src2.csv
[Wed Jul 25 18:56:44 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jul 25 18:56:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_src2.csv
[Wed Jul 25 18:56:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:56:44 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jul 25 18:56:44 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jul 25 18:56:44 2012] Fit fullrun_mos1_xmm0073140301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jul 25 19:15:54 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.436991 pixels away
[Wed Jul 25 19:15:54 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 19:15:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 19:15:54 2012] Assessing source extent using major
[Wed Jul 25 19:15:54 2012] Source does appear to be extended
[Wed Jul 25 19:15:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 19:16:00 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 19:16:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 25 19:16:00 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Wed Jul 25 19:16:00 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Wed Jul 25 19:16:00 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.34"
[Wed Jul 25 19:37:35 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jul 25 19:37:35 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jul 25 19:37:35 2012] Fit fullrun_mos1_xmm0073140301_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jul 25 19:37:35 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jul 25 19:37:35 2012] fullrun_mos1_xmm0073140301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jul 25 19:37:35 2012] Fit fullrun_mos1_xmm0073140301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jul 25 19:52:22 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.162981 pixels away
[Wed Jul 25 19:52:22 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 19:52:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 19:52:22 2012] Assessing source extent using major
[Wed Jul 25 19:52:22 2012] Source does appear to be extended
[Wed Jul 25 19:52:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 19:52:28 2012] XMMSAS src. selection expression = ellipse(27617.969940, 35150.532318, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 19:52:28 2012] Writing source region out to fullrun_mos1_xmm0073140301_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 25 19:52:28 2012] Extracting stamp from image fullrun_mos1_xmm0073140301_pi300-10000_cl_sm2.00.img.gz, (281, 367) - (356, 442)
[Wed Jul 25 19:52:28 2012] XMMSAS bgd. selection expression = annulus(27617.969940, 35150.532318, 1087.500000, 2175.000000, X, Y)
[Wed Jul 25 19:52:28 2012] Writing fullrun_mos1_xmm0073140301_pi300-10000_pass1_cl_src2.gif
[Wed Jul 25 19:56:19 2012] Mean detx,y = (-6671.90, -9157.91) 
[Wed Jul 25 19:56:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 19:56:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 19:56:30 2012] Setting source spectrum file to fullrun_mos1_xmm0073140301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 19:56:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0073140301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 25 20:08:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 20:08:22 2012] rmf not generated due to insufficient counts
[Wed Jul 25 20:33:10 2012] Updating aperture counts using extracted products
[Wed Jul 25 20:33:10 2012] Error reading totcts from fullrun_mos1_xmm0073140301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 20:33:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 20:33:10 2012] Using photon index=1.80, rate=0.00327, arf fullrun_mos1_xmm0073140301_pi300-10000_pass1_cl_src2.arf
[Wed Jul 25 20:33:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 20:33:10 2012] Updating source flux to 6.4e-14
[Wed Jul 25 20:33:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting