[Sun Feb 19 22:06:18 2012] Detection parameters:
  Position = (300.1, 277.8) = 16 5 18.60 32 49 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16581.2 +/- 154.5
  Background counts = 14.0
  Rate = 0.6 +/- 0.005

[Sun Feb 19 22:06:19 2012] Off-axis axis estimate = 1.50'
[Sun Feb 19 22:07:42 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 22:07:42 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Feb 19 22:07:42 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Feb 19 22:07:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Sun Feb 19 22:48:30 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 19 22:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 22:48:30 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 19 22:48:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 19 22:48:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 22:48:31 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 22:48:31 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 22:48:31 2012] Fit fullrun_mos1_xmm0073140201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 23:31:07 2012] Spatial fit model total counts = 14344.600000, observed total counts = 14333.000000
[Sun Feb 19 23:31:07 2012] Offset between fit and detection position for source 1 = 0.179360 pixels
[Sun Feb 19 23:31:07 2012] 14327.860000 total counts/ 3018.860000 bgd. counts: snr = 205.827177
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179360 pixels
  Position = (299.9, 277.7) = 16 5 18.65 32 49 16.5
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 11309.0 +/- 119.7
  Background counts = 3018.9
  Rate = 0.4 +/- 0.004
[Sun Feb 19 23:31:07 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 23:31:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 23:31:07 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 23:31:07 2012] Source does appear to be extended
[Sun Feb 19 23:31:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 23:31:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 23:31:20 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Sun Feb 19 23:31:20 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.260
[Sun Feb 19 23:31:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.58"
[Sun Feb 19 23:58:02 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 19 23:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 23:58:02 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 19 23:58:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 19 23:58:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 23:58:02 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 23:58:02 2012] fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 23:58:02 2012] Fit fullrun_mos1_xmm0073140201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 20 00:34:51 2012] Spatial fit model total counts = 14362.600000, observed total counts = 14363.000000
[Mon Feb 20 00:34:51 2012] Offset between fit and detection position for source 1 = 0.012331 pixels
[Mon Feb 20 00:34:51 2012] 14394.510000 total counts/ 3104.110000 bgd. counts: snr = 202.647279
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012331 pixels
  Position = (299.9, 277.7) = 16 5 18.65 32 49 16.5
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 11290.4 +/- 120.0
  Background counts = 3104.1
  Rate = 0.4 +/- 0.004
[Mon Feb 20 00:34:51 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 00:34:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 00:34:51 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 00:34:51 2012] Source does appear to be extended
[Mon Feb 20 00:34:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 00:34:58 2012] Counts = 11290.400000, rescaling region sizes by 3.000000
[Mon Feb 20 00:34:58 2012] XMMSAS src. selection expression = ellipse(26046.032700, 24112.724200, 1002.216629, 1002.216629, 0.000000, X, Y)
[Mon Feb 20 00:34:58 2012] Writing source region out to fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 20 00:34:58 2012] Extracting stamp from image fullrun_mos1_xmm0073140201_pi300-10000_cl_sm2.00.img.gz, (242, 220) - (358, 335)
[Mon Feb 20 00:34:58 2012] XMMSAS bgd. selection expression = annulus(26046.032700, 24112.724200, 5011.083144, 10022.166288, X, Y) && !ellipse(19310.027496, 29809.478912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16643.214800, 27349.163620, 465.806413, 465.806413, 0.000000, X, Y) && !ellipse(24284.973063, 24929.788598, 587.241934, 294.486126, 317.342267, X, Y) && !ellipse(31165.590881, 16129.874557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.916443, 27808.088623, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 20 00:34:58 2012] Writing fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1.gif
[Mon Feb 20 00:35:02 2012] Mean detx,y = (82.90, -339.94) 
[Mon Feb 20 00:35:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 20 00:40:53 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 20 00:40:53 2012] Setting source spectrum file to fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 20 00:40:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 20 01:30:28 2012] Updating aperture counts using extracted products
[Mon Feb 20 01:30:28 2012] Error reading totcts from fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 20 01:30:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 01:30:29 2012] Using photon index=1.80, rate=0.402, arf fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1.arf
[Mon Feb 20 01:30:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 01:30:29 2012] Updating source flux to 3.6e-12
[Mon Feb 20 01:30:57 2012] Reading fit data from xmm0073140201/analysis//spectral/fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Feb 20 01:30:57 2012] Spectral fit parameter nH value = 1.77933e+21
[Mon Feb 20 01:30:57 2012] Spectral fit parameter PhoIndex value = 6.70735
[Mon Feb 20 01:30:57 2012] Failed to get F(0.3-8.0) from xmm0073140201/analysis//spectral/fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 01:30:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 01:30:57 2012] Using Nh = 1.8e+21, photon index=6.71, rate=0.402, arf fullrun_mos1_xmm0073140201_pi300-10000_pass1_cl_src1.arf
[Mon Feb 20 01:30:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 20 01:30:57 2012] Updating source flux to 2.4e-12