[Sat May 19 14:21:46 2012] Detection parameters:
  Position = (311.2, 316.0) = 9 19 46.61 -7 32 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21.2 +/- 6.1
  Background counts = 3.1
  Rate = 0.003 +/- 0.0009

[Sat May 19 14:21:47 2012] Off-axis axis estimate = 1.57'
[Sat May 19 14:35:16 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat May 19 14:35:16 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Sat May 19 14:35:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Sat May 19 14:35:16 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.22"
[Sat May 19 14:53:08 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_src10.ximg exists
[Sat May 19 14:53:08 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May 19 14:53:08 2012] Fit fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_src10 appears to have run properly
[Sat May 19 14:53:08 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May 19 14:53:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 19 14:53:08 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May 19 14:53:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 19 14:53:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0072340601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 14:53:14 2012] Source 8 is offset by -6.480484 and 5.648178 pixels which is larger than
2 X fitted extent = 0.829310 x 3.032791, not incorporating fit results
[Sat May 19 14:53:14 2012] Vigneting correction estimate = 1.000000
[Sat May 19 14:53:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 14:53:14 2012] Assessing source extent using major
[Sat May 19 14:53:14 2012] Source does appear to be extended
[Sat May 19 14:53:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 15:00:49 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sat May 19 15:00:49 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Sat May 19 15:00:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Sat May 19 15:00:49 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.22"
[Sat May 19 15:17:41 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_src10.ximg exists
[Sat May 19 15:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_src10.csv
[Sat May 19 15:17:41 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May 19 15:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_src10.csv
[Sat May 19 15:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:17:41 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May 19 15:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat May 19 15:17:41 2012] fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 19 15:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat May 19 15:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0072340601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 19 15:17:46 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 34.855930 pixels away
[Sat May 19 15:17:46 2012] Spatial fit model total counts = 51.887100, observed total counts = 39.000000
[Sat May 19 15:17:46 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 19 15:17:46 2012] Vigneting correction estimate = 1.000000
[Sat May 19 15:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 19 15:17:46 2012] Assessing source extent using major
[Sat May 19 15:17:46 2012] Source does appear to be extended
[Sat May 19 15:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 19 15:28:39 2012] XMMSAS src. selection expression = ellipse(27021.899933, 27444.689453, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 19 15:28:39 2012] Writing source region out to fullrun_mos2_xmm0072340601_pi300-10000_pass1_cl_src8_src.reg
[Sat May 19 15:28:39 2012] Extracting stamp from image fullrun_mos2_xmm0072340601_pi300-10000_cl_sm2.00.img.gz, (274, 279) - (349, 354)
[Sat May 19 15:28:39 2012] XMMSAS bgd. selection expression = annulus(27021.899933, 27444.689453, 1087.500000, 2175.000000, X, Y)
[Sat May 19 15:28:39 2012] Writing fullrun_mos2_xmm0072340601_pi300-10000_pass1_cl_src8.gif
[Sat May 19 15:31:29 2012] Mean detx,y = (2776.76, -2598.03) 
[Sat May 19 15:31:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 19 15:31:39 2012] Binned source spectrum to 10 counts/bin
[Sat May 19 15:31:39 2012] Setting source spectrum file to fullrun_mos2_xmm0072340601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat May 19 15:31:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0072340601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat May 19 15:39:56 2012] Not generating rmf since there are only 21 counts
[Sat May 19 15:39:56 2012] rmf not generated due to insufficient counts
[Sat May 19 15:40:08 2012] Updating aperture counts using extracted products
[Sat May 19 15:40:08 2012] Error reading totcts from fullrun_mos2_xmm0072340601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat May 19 15:40:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 19 15:40:09 2012] Using photon index=1.80, rate=0.00314, arf fullrun_mos2_xmm0072340601_pi300-10000_pass1_cl_src8.arf
[Sat May 19 15:40:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 19 15:40:09 2012] Updating source flux to 3.1e-14
[Sat May 19 15:40:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting