[Fri Jul 12 22:11:43 2013] Detection parameters:
  Position = (295.9, 315.0) = 9 19 53.84 -7 36 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.3 +/- 51.7
  Background counts = 1407.6
  Rate = 0.08 +/- 0.02

[Fri Jul 12 22:11:43 2013] Off-axis axis estimate = 1.21'
[Fri Jul 12 22:13:08 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 12 22:13:08 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Fri Jul 12 22:13:08 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Fri Jul 12 22:13:08 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.04"
[Fri Jul 12 23:52:02 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jul 12 23:52:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_src8.csv
[Fri Jul 12 23:52:02 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jul 12 23:52:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_src8.csv
[Fri Jul 12 23:52:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 23:52:02 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jul 12 23:52:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jul 12 23:52:02 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jul 12 23:52:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jul 12 23:52:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0072340201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 12 23:53:54 2013] Source 8 is offset by 4.120310 and 0.738577 pixels which is larger than
2 X fitted extent = 0.845664 x 0.845664, not incorporating fit results
[Fri Jul 12 23:53:54 2013] Warning, spatial fit 8 centroid is now closest to src. 3
[Fri Jul 12 23:53:54 2013] Vigneting correction estimate = 1.000000
[Fri Jul 12 23:53:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 12 23:53:54 2013] Assessing source extent using major
[Fri Jul 12 23:53:54 2013] Source does appear to be extended
[Fri Jul 12 23:53:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 12 23:53:54 2013] Source is confused with source 3
[Fri Jul 12 23:53:57 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Fri Jul 12 23:53:57 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Fri Jul 12 23:53:57 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Fri Jul 12 23:53:57 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.04"
[Sat Jul 13 00:17:30 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jul 13 00:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_src8.csv
[Sat Jul 13 00:17:30 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jul 13 00:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_src8.csv
[Sat Jul 13 00:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 13 00:17:30 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jul 13 00:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Jul 13 00:17:30 2013] fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jul 13 00:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Jul 13 00:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0072340201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 13 00:19:25 2013] Source 8 is offset by -6.277851 and -2.691515 pixels which is larger than
2 X fitted extent = 2.053094 x 1.602805, not incorporating fit results
[Sat Jul 13 00:19:25 2013] Source 8 is offset by -6.580633 and -2.685963 pixels which is larger than
2 X fitted extent = 1.258892 x 6.469058, not incorporating fit results
[Sat Jul 13 00:19:25 2013] Vigneting correction estimate = 1.000000
[Sat Jul 13 00:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 13 00:19:25 2013] Assessing source extent using major
[Sat Jul 13 00:19:25 2013] Source does appear to be extended
[Sat Jul 13 00:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 13 00:19:29 2013] XMMSAS src. selection expression = ellipse(25693.548950, 27354.174194, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 13 00:19:29 2013] Writing source region out to fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8_src.reg
[Sat Jul 13 00:19:29 2013] Extracting stamp from image fullrun_pn_xmm0072340201_pi300-10000_cl_sm2.00.img.gz, (258, 277) - (333, 352)
[Sat Jul 13 00:19:29 2013] XMMSAS bgd. selection expression = annulus(25693.548950, 27354.174194, 1087.500000, 2175.000000, X, Y) && !ellipse(26473.069000, 27850.495600, 427.200812, 401.812012, 359.898286, X, Y) && !ellipse(25461.510010, 28019.625427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25644.934000, 26779.744000, 3346.656096, 3346.656096, 179.658000, X, Y) && !ellipse(24780.155151, 27833.576904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.015411, 28760.630829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27609.025146, 28567.602234, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 13 00:19:29 2013] Writing fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8.gif
[Sat Jul 13 00:26:02 2013] Mean detx,y = (-800.79, 35.82) 
[Sat Jul 13 00:26:03 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 13 00:26:05 2013] Binned source spectrum to 10 counts/bin
[Sat Jul 13 00:26:05 2013] Setting source spectrum file to fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jul 13 00:26:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jul 13 03:59:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 13 03:59:22 2013] rmf not generated due to insufficient counts
[Sat Jul 13 04:03:17 2013] Updating aperture counts using extracted products
[Sat Jul 13 04:03:17 2013] Total counts from fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 11662.00
[Sat Jul 13 04:03:17 2013] Total counts from fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 0.00
[Sat Jul 13 04:03:17 2013] Got source and background scale factors 1339200.000000, 0.000000
[Sat Jul 13 04:03:17 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jul 13 04:03:18 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jul 13 04:03:18 2013] Using photon index=1.80, rate=0.0835, arf fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8.arf
[Sat Jul 13 04:03:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 13 04:03:18 2013] Updating source flux to 2.2e-13
[Sat Jul 13 04:03:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jul 13 04:03:22 2013] xmm0072340201/analysis//spectral/fullrun_pn_xmm0072340201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete