[Thu Jul 26 10:18:16 2012] Detection parameters:
  Position = (200.5, 306.0) = 5 27 18.95 -67 26 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.2 +/- 12.2
  Background counts = 36.9
  Rate = 0.003 +/- 0.0008

[Thu Jul 26 10:18:17 2012] Off-axis axis estimate = 7.12'
[Thu Jul 26 10:21:10 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 10:21:10 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Thu Jul 26 10:21:10 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Thu Jul 26 10:21:10 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.99"
[Thu Jul 26 11:20:58 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jul 26 11:20:58 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jul 26 11:20:58 2012] Fit fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_src20 appears to have run properly
[Thu Jul 26 11:20:58 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jul 26 11:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Jul 26 11:20:58 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jul 26 11:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Thu Jul 26 11:20:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071940101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 12:23:35 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.678116 pixels away
[Thu Jul 26 12:23:35 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 12:23:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 12:23:35 2012] Assessing source extent using major
[Thu Jul 26 12:23:35 2012] Source does appear to be extended
[Thu Jul 26 12:23:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 12:23:59 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 12:23:59 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Thu Jul 26 12:23:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Thu Jul 26 12:23:59 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 9.99"
[Thu Jul 26 13:23:43 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Jul 26 13:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_src20.csv
[Thu Jul 26 13:23:43 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Jul 26 13:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_src20.csv
[Thu Jul 26 13:23:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 13:23:43 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Jul 26 13:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jul 26 13:23:43 2012] fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Jul 26 13:23:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Jul 26 13:23:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071940101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 14:18:05 2012] Warning, spatial fit 20 centroid is now closest to src. 22
[Thu Jul 26 14:18:05 2012] Source 20 is offset by -3.222995 and 5.721789 pixels which is larger than
2 X fitted extent = 1.289260 x 1.289260, not incorporating fit results
[Thu Jul 26 14:18:05 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 14:18:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 14:18:05 2012] Assessing source extent using major
[Thu Jul 26 14:18:05 2012] Source does appear to be extended
[Thu Jul 26 14:18:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 14:18:22 2012] XMMSAS src. selection expression = ellipse(17391.775467, 26576.619659, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 26 14:18:22 2012] Writing source region out to fullrun_pn_xmm0071940101_pi300-10000_pass1_cl_src20_src.reg
[Thu Jul 26 14:18:22 2012] Extracting stamp from image fullrun_pn_xmm0071940101_pi300-10000_cl_sm2.00.img.gz, (163, 269) - (238, 344)
[Thu Jul 26 14:18:22 2012] XMMSAS bgd. selection expression = annulus(17391.775467, 26576.619659, 1087.500000, 2175.000000, X, Y) && !ellipse(18772.066788, 25657.100708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18592.126160, 25110.767365, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 26 14:18:22 2012] Writing fullrun_pn_xmm0071940101_pi300-10000_pass1_cl_src20.gif
[Thu Jul 26 14:29:13 2012] Mean detx,y = (4184.97, 8257.48) 
[Thu Jul 26 14:29:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 26 14:29:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 26 14:29:44 2012] Setting source spectrum file to fullrun_pn_xmm0071940101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul 26 14:29:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0071940101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Jul 26 14:53:45 2012] Not generating rmf since there are only 51 counts
[Thu Jul 26 14:53:45 2012] rmf not generated due to insufficient counts
[Thu Jul 26 15:32:03 2012] Updating aperture counts using extracted products
[Thu Jul 26 15:32:03 2012] Error reading totcts from fullrun_pn_xmm0071940101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Thu Jul 26 15:32:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 26 15:32:04 2012] Using photon index=1.80, rate=0.00328, arf fullrun_pn_xmm0071940101_pi300-10000_pass1_cl_src20.arf
[Thu Jul 26 15:32:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 26 15:32:04 2012] Updating source flux to 1.3e-14
[Thu Jul 26 15:32:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting