[Sun Mar 18 20:50:41 2012] Detection parameters:
  Position = (349.3, 207.0) = 5 35 5.79 -67 0 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 481.6 +/- 27.9
  Background counts = 42.5
  Rate = 0.03 +/- 0.002

[Sun Mar 18 20:50:42 2012] Off-axis axis estimate = 7.58'
[Sun Mar 18 21:23:15 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 21:23:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 21:23:15 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Sun Mar 18 21:23:15 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.108
[Sun Mar 18 21:23:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.22"
[Sun Mar 18 21:41:22 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 21:41:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 21:41:22 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 21:41:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 21:41:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:41:22 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 21:41:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 21:41:22 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 21:41:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Mar 18 21:41:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071740501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 21:41:33 2012] Source 1 is offset by 7.433752 and 6.110976 pixels which is larger than
2 X fitted extent = 0.842657 x 0.842657, not incorporating fit results
[Sun Mar 18 21:41:33 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 21:41:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 21:41:33 2012] Assessing source extent using major
[Sun Mar 18 21:41:33 2012] Source does appear to be extended
[Sun Mar 18 21:41:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 22:00:31 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 22:00:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 22:00:31 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Sun Mar 18 22:00:31 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.108
[Sun Mar 18 22:00:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.22"
[Sun Mar 18 22:17:08 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 22:17:08 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 22:17:08 2012] Fit fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Mar 18 22:17:08 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 22:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 18 22:17:08 2012] fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 22:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Mar 18 22:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071740501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 22:17:16 2012] Spatial fit model total counts = 840.880000, observed total counts = 791.000000
[Sun Mar 18 22:17:16 2012] Offset between fit and detection position for source 1 = 0.252917 pixels
[Sun Mar 18 22:17:16 2012] 844.626000 total counts/ 504.393000 bgd. counts: snr = 15.149277
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.252917 pixels
  Position = (349.5, 207.0) = 5 35 5.60 -67 0 16.6
  Extent = 7.4" x 4.7", rotation angle = 343
  Source counts = 340.2 +/- 29.1
  Background counts = 504.4
  Rate = 0.02 +/- 0.001
[Sun Mar 18 22:17:16 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 22:17:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 22:17:16 2012] Assessing source extent using major
[Sun Mar 18 22:17:16 2012] Source does appear to be extended
[Sun Mar 18 22:17:16 2012] Computing asymmetry using major and minor axis, asym = 1.57
[Sun Mar 18 22:17:16 2012] Source is asymmetric
[Sun Mar 18 22:39:48 2012] XMMSAS src. selection expression = ellipse(30360.407367, 17962.047768, 444.345179, 283.147121, 342.971062, X, Y)
[Sun Mar 18 22:39:48 2012] Writing source region out to fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 18 22:39:48 2012] Extracting stamp from image fullrun_mos2_xmm0071740501_pi300-10000_cl_sm2.00.img.gz, (324, 181) - (375, 233)
[Sun Mar 18 22:39:48 2012] XMMSAS bgd. selection expression = annulus(30360.407367, 17962.047768, 740.575298, 1481.150596, X, Y)
[Sun Mar 18 22:39:48 2012] Writing fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1.gif
[Sun Mar 18 22:39:50 2012] Mean detx,y = (457.91, -10664.07) 
[Sun Mar 18 22:39:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 22:40:07 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 22:40:07 2012] Setting source spectrum file to fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 22:40:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 18 22:56:44 2012] Updating aperture counts using extracted products
[Sun Mar 18 22:56:44 2012] Error reading totcts from fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 18 22:56:45 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 22:56:45 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 22:56:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 22:56:45 2012] Updating source flux to 3.7e-13
[Sun Mar 18 22:57:00 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Mar 18 22:57:44 2012] Reading fit data from xmm0071740501/analysis//spectral/fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 18 22:57:44 2012] Spectral fit parameter nH value = 1.74994e+22
[Sun Mar 18 22:57:44 2012] Spectral fit parameter PhoIndex value = 0.675318
[Sun Mar 18 22:57:44 2012] Failed to get F(0.3-8.0) from xmm0071740501/analysis//spectral/fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 18 22:57:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 22:57:44 2012] Using Nh = 1.7e+22, photon index=0.68, rate=0.016, arf fullrun_mos2_xmm0071740501_pi300-10000_pass1_cl_src1.arf
[Sun Mar 18 22:57:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 22:57:44 2012] Updating source flux to 1.1e-12