[Sun Sep 25 02:28:42 2011] Detection parameters:
  Position = (109.4, 333.1) = 13 51 6.50 60 15 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.1 +/- 17.0
  Background counts = 39.9
  Rate = 0.004 +/- 0.0005

[Sun Sep 25 02:28:42 2011] Off-axis axis estimate = 13.94'
[Sun Sep 25 03:06:35 2011] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 03:06:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 03:06:35 2011] Initial guess for spatial extent in simple fitting = 13.40"
[Sun Sep 25 03:06:35 2011] source mask rpix=3.1, npix_max = 51, mask sum = 43, frac = 0.839
[Sun Sep 25 03:06:35 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 13.40"
[Sun Sep 25 03:20:26 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass0_src6.ximg exists
[Sun Sep 25 03:20:26 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Sep 25 03:20:26 2011] Fit fullrun_mos2_xmm0071340501_pi300-10000_cl_pass0_src6 appears to have run properly
[Sun Sep 25 03:20:26 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Sep 25 03:20:26 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Sep 25 03:20:26 2011] Fit fullrun_mos2_xmm0071340501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Sep 25 03:20:33 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.806438 pixels away
[Sun Sep 25 03:20:33 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 03:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 03:20:33 2011] Assessing source extent using major
[Sun Sep 25 03:20:33 2011] Source does appear to be extended
[Sun Sep 25 03:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 03:52:13 2011] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 03:52:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 03:52:13 2011] Initial guess for spatial extent in simple fitting = 13.40"
[Sun Sep 25 03:52:13 2011] source mask rpix=3.1, npix_max = 51, mask sum = 43, frac = 0.839
[Sun Sep 25 03:52:13 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 13.40"
[Sun Sep 25 04:00:47 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_src6.ximg exists
[Sun Sep 25 04:00:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_src6.csv
[Sun Sep 25 04:00:47 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Sep 25 04:00:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_src6.csv
[Sun Sep 25 04:00:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 04:00:47 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Sep 25 04:00:47 2011] fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Sep 25 04:00:47 2011] Fit fullrun_mos2_xmm0071340501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Sep 25 04:00:54 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.806438 pixels away
[Sun Sep 25 04:00:54 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 04:00:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 04:00:54 2011] Assessing source extent using major
[Sun Sep 25 04:00:54 2011] Source does appear to be extended
[Sun Sep 25 04:00:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 04:34:51 2011] XMMSAS src. selection expression = ellipse(9466.905960, 28929.798676, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 04:34:51 2011] Writing source region out to fullrun_mos2_xmm0071340501_pi300-10000_pass1_cl_src5_src.reg
[Sun Sep 25 04:34:51 2011] Extracting stamp from image fullrun_mos2_xmm0071340501_pi300-10000_cl_sm2.00.img.gz, (72, 296) - (147, 371)
[Sun Sep 25 04:34:51 2011] XMMSAS bgd. selection expression = annulus(9466.905960, 28929.798676, 1087.500000, 2175.000000, X, Y)
[Sun Sep 25 04:34:51 2011] Writing fullrun_mos2_xmm0071340501_pi300-10000_pass1_cl_src5.gif
[Sun Sep 25 04:35:50 2011] Mean detx,y = (-10420.21, -13521.08) 
[Sun Sep 25 04:35:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 04:36:09 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 04:36:10 2011] Setting source spectrum file to fullrun_mos2_xmm0071340501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Sep 25 04:36:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0071340501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Sep 25 04:43:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Sep 25 04:43:19 2011] rmf not generated due to insufficient counts
[Sun Sep 25 04:44:17 2011] Updating aperture counts using extracted products
[Sun Sep 25 04:44:17 2011] Error reading totcts from fullrun_mos2_xmm0071340501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Sep 25 04:44:17 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 04:44:17 2011] Using photon index=1.80, rate=0.00419, arf fullrun_mos2_xmm0071340501_pi300-10000_pass1_cl_src5.arf
[Sun Sep 25 04:44:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 04:44:17 2011] Updating source flux to 1.3e-13
[Sun Sep 25 04:44:33 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting