[Tue May 14 00:39:22 2013] Detection parameters:
  Position = (153.9, 325.4) = 12 32 10.08 25 50 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.5 +/- 10.7
  Background counts = 23.7
  Rate = 0.002 +/- 0.0004

[Tue May 14 00:39:24 2013] Off-axis axis estimate = 10.66'
[Tue May 14 00:43:29 2013] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Tue May 14 00:43:29 2013] Initial guess for spatial extent in simple fitting = 11.76"
[Tue May 14 00:43:29 2013] source mask rpix=2.7, npix_max = 41, mask sum = 38, frac = 0.926
[Tue May 14 00:43:29 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 11.76"
[Tue May 14 02:17:30 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_src26.ximg exists
[Tue May 14 02:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_src26.csv
[Tue May 14 02:17:30 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue May 14 02:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_src26.csv
[Tue May 14 02:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 02:17:31 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue May 14 02:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 14 02:17:31 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue May 14 02:17:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue May 14 02:17:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:52:49 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 14.288874 pixels away
[Tue May 14 04:52:49 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:52:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:52:49 2013] Assessing source extent using major
[Tue May 14 04:52:49 2013] Source does appear to be extended
[Tue May 14 04:52:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 04:53:29 2013] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Tue May 14 04:53:29 2013] Initial guess for spatial extent in simple fitting = 11.76"
[Tue May 14 04:53:29 2013] source mask rpix=2.7, npix_max = 41, mask sum = 38, frac = 0.926
[Tue May 14 04:53:29 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 11.76"
[Tue May 14 06:06:29 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_src26.ximg exists
[Tue May 14 06:06:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_src26.csv
[Tue May 14 06:06:29 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue May 14 06:06:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_src26.csv
[Tue May 14 06:06:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 06:06:29 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue May 14 06:06:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May 14 06:06:29 2013] fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue May 14 06:06:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue May 14 06:06:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:58:59 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 10.326004 pixels away
[Tue May 14 07:58:59 2013] Source 27 is offset by -9.243168 and 3.583280 pixels which is larger than
2 X fitted extent = 1.408202 x 1.408202, not incorporating fit results
[Tue May 14 07:58:59 2013] Vigneting correction estimate = 1.000000
[Tue May 14 07:58:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 07:58:59 2013] Assessing source extent using major
[Tue May 14 07:58:59 2013] Source does appear to be extended
[Tue May 14 07:58:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 07:59:37 2013] XMMSAS src. selection expression = ellipse(13338.310379, 28265.579376, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 07:59:37 2013] Writing source region out to fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27_src.reg
[Tue May 14 07:59:37 2013] Extracting stamp from image fullrun_pn_xmm0071340301_pi300-10000_cl_sm2.00.img.gz, (116, 288) - (191, 363)
[Tue May 14 07:59:37 2013] XMMSAS bgd. selection expression = annulus(13338.310379, 28265.579376, 1087.500000, 2175.000000, X, Y) && !ellipse(13408.010208, 26146.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15587.209137, 31036.261749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14725.292374, 30724.481659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14518.909400, 30198.262000, 1837.016053, 322.442409, 290.120300, X, Y) && !ellipse(13345.792800, 30161.007000, 673.788019, 338.678410, 97.182550, X, Y) && !ellipse(11043.430496, 26415.796570, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 07:59:37 2013] Writing fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27.gif
[Tue May 14 08:20:59 2013] Mean detx,y = (8048.61, 10508.38) 
[Tue May 14 08:21:01 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 08:21:23 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 08:21:23 2013] Setting source spectrum file to fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue May 14 08:21:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue May 14 09:04:13 2013] Not generating rmf since there are only 60 counts
[Tue May 14 09:04:13 2013] rmf not generated due to insufficient counts
[Tue May 14 10:16:32 2013] Updating aperture counts using extracted products
[Tue May 14 10:16:33 2013] Total counts from fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 163.00
[Tue May 14 10:16:33 2013] Total counts from fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 988.00
[Tue May 14 10:16:33 2013] Got source and background scale factors 847209.000000, 7592804.000000
[Tue May 14 10:16:33 2013] User source parameters:
  Position = (153.9, 325.4) = 12 32 10.08 25 50 14.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 52.8 +/- 13.8
  Background aperture counts = 110.2
  Rate = 0.002 +/- 0.0005

[Tue May 14 10:16:33 2013] Updating counts from extracted products
[Tue May 14 10:16:33 2013] Set source signif. to 52.76/10.50 = 5.02
[Tue May 14 10:16:37 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 10:16:37 2013] Using photon index=1.80, rate=0.00194, arf fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27.arf
[Tue May 14 10:16:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 10:16:37 2013] Updating source flux to 1.4e-14
[Tue May 14 10:16:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 10:17:04 2013] xmm0071340301/analysis//spectral/fullrun_pn_xmm0071340301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete