[Tue May 14 00:40:57 2013] Detection parameters:
  Position = (115.5, 232.0) = 12 32 22.40 25 43 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 9.2
  Background counts = 6.2
  Rate = 0.001 +/- 0.0003

[Tue May 14 00:40:57 2013] Off-axis axis estimate = 14.11'
[Tue May 14 03:23:58 2013] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:23:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 03:23:58 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Tue May 14 03:23:58 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.080
[Tue May 14 03:23:58 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 13.49"
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src28.ximg exists
[Tue May 14 04:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src28.csv
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue May 14 04:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src28.csv
[Tue May 14 04:52:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue May 14 04:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue May 14 04:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src28.csv
[Tue May 14 04:52:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:53:11 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 15.997189 pixels away
[Tue May 14 04:53:11 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:53:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:53:11 2013] Assessing source extent using major
[Tue May 14 04:53:11 2013] Source does appear to be extended
[Tue May 14 04:53:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 07:00:06 2013] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Tue May 14 07:00:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 07:00:06 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Tue May 14 07:00:06 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.080
[Tue May 14 07:00:06 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.49"
[Tue May 14 07:58:45 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src27.ximg exists
[Tue May 14 07:58:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src27.csv
[Tue May 14 07:58:45 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue May 14 07:58:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src27.csv
[Tue May 14 07:58:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:58:46 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue May 14 07:58:46 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue May 14 07:58:46 2013] Fit fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Tue May 14 07:59:18 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 16.829835 pixels away
[Tue May 14 07:59:18 2013] Vigneting correction estimate = 1.000000
[Tue May 14 07:59:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 07:59:18 2013] Assessing source extent using major
[Tue May 14 07:59:18 2013] Source does appear to be extended
[Tue May 14 07:59:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 09:44:26 2013] XMMSAS src. selection expression = ellipse(9996.288269, 20133.228622, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 09:44:26 2013] Writing source region out to fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40_src.reg
[Tue May 14 09:44:26 2013] Extracting stamp from image fullrun_mos2_xmm0071340301_pi300-10000_cl_sm2.00.img.gz, (78, 194) - (153, 269)
[Tue May 14 09:44:26 2013] XMMSAS bgd. selection expression = annulus(9996.288269, 20133.228622, 1087.500000, 2175.000000, X, Y)
[Tue May 14 09:44:26 2013] Writing fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40.gif
[Tue May 14 09:53:28 2013] Mean detx,y = (-15261.95, -5781.38) 
[Tue May 14 09:53:30 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 09:53:50 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 09:53:50 2013] Setting source spectrum file to fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue May 14 09:53:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue May 14 10:14:30 2013] Not generating rmf since there are only 43 counts
[Tue May 14 10:14:30 2013] rmf not generated due to insufficient counts
[Tue May 14 10:16:49 2013] Updating aperture counts using extracted products
[Tue May 14 10:16:49 2013] Total counts from fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 91.00
[Tue May 14 10:16:49 2013] Total counts from fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 171.00
[Tue May 14 10:16:49 2013] Got source and background scale factors 1332760.000000, 5307603.000000
[Tue May 14 10:16:49 2013] User source parameters:
  Position = (115.5, 232.0) = 12 32 22.40 25 43 24.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 48.1 +/- 10.6
  Background aperture counts = 42.9
  Rate = 0.002 +/- 0.0004

[Tue May 14 10:16:49 2013] Updating counts from extracted products
[Tue May 14 10:16:49 2013] Set source signif. to 48.06/6.55 = 7.33
[Tue May 14 10:16:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 10:16:51 2013] Using photon index=1.80, rate=0.00162, arf fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40.arf
[Tue May 14 10:16:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 10:16:51 2013] Updating source flux to 4.3e-14
[Tue May 14 10:16:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 10:16:59 2013] xmm0071340301/analysis//spectral/fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete