[Tue May 14 00:40:57 2013] Detection parameters:
  Position = (290.6, 250.6) = 12 31 26.03 25 44 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.7 +/- 7.7
  Background counts = 9.4
  Rate = 0.001 +/- 0.0003

[Tue May 14 00:40:57 2013] Off-axis axis estimate = 3.51'
[Tue May 14 03:23:58 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:23:58 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Tue May 14 03:23:58 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.102
[Tue May 14 03:23:58 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 8.18"
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src39.ximg exists
[Tue May 14 04:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src39.csv
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src39_1.ximg exists
[Tue May 14 04:52:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src39.csv
[Tue May 14 04:52:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:52:32 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Tue May 14 04:52:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Tue May 14 04:52:33 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Tue May 14 04:52:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Tue May 14 04:52:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:53:11 2013] Source 38 is offset by -6.941754 and 7.158172 pixels which is larger than
2 X fitted extent = 1.026855 x 0.941103, not incorporating fit results
[Tue May 14 04:53:11 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:53:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:53:11 2013] Assessing source extent using major
[Tue May 14 04:53:11 2013] Source does appear to be extended
[Tue May 14 04:53:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 07:00:06 2013] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue May 14 07:00:06 2013] Initial guess for spatial extent in simple fitting = 8.18"
[Tue May 14 07:00:06 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.102
[Tue May 14 07:00:06 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 8.18"
[Tue May 14 07:58:45 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src35.ximg exists
[Tue May 14 07:58:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src35.csv
[Tue May 14 07:58:45 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue May 14 07:58:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src35.csv
[Tue May 14 07:58:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:58:46 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue May 14 07:58:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Tue May 14 07:58:46 2013] fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue May 14 07:58:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Tue May 14 07:58:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:59:18 2013] Spatial fit model total counts = 292.644000, observed total counts = 364.000000
[Tue May 14 07:59:18 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 07:59:18 2013] Vigneting correction estimate = 1.000000
[Tue May 14 07:59:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 07:59:18 2013] Assessing source extent using major
[Tue May 14 07:59:18 2013] Source does appear to be extended
[Tue May 14 07:59:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 09:44:26 2013] XMMSAS src. selection expression = ellipse(25232.285400, 21756.483002, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 09:44:26 2013] Writing source region out to fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38_src.reg
[Tue May 14 09:44:26 2013] Extracting stamp from image fullrun_mos2_xmm0071340301_pi300-10000_cl_sm2.00.img.gz, (253, 213) - (328, 288)
[Tue May 14 09:44:26 2013] XMMSAS bgd. selection expression = annulus(25232.285400, 21756.483002, 1087.500000, 2175.000000, X, Y) && !ellipse(25742.361000, 23783.344400, 493.690414, 493.690414, 0.000000, X, Y) && !ellipse(23020.591440, 22324.516400, 320.880809, 320.880809, 0.000000, X, Y) && !ellipse(24263.074921, 23606.398560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25429.923126, 22444.902893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23787.845917, 21514.734619, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 09:44:26 2013] Writing fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38.gif
[Tue May 14 09:56:00 2013] Mean detx,y = (-1794.80, 1250.60) 
[Tue May 14 09:56:03 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 09:56:12 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 09:56:13 2013] Setting source spectrum file to fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue May 14 09:56:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue May 14 10:15:22 2013] Not generating rmf since there are only 26 counts
[Tue May 14 10:15:22 2013] rmf not generated due to insufficient counts
[Tue May 14 10:16:50 2013] Updating aperture counts using extracted products
[Tue May 14 10:16:50 2013] Total counts from fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 168.00
[Tue May 14 10:16:50 2013] Total counts from fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38_bgd.pi.gz = 342.00
[Tue May 14 10:16:50 2013] Got source and background scale factors 1328000.000000, 6432648.000000
[Tue May 14 10:16:51 2013] User source parameters:
  Position = (290.6, 250.6) = 12 31 26.03 25 44 48.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 97.4 +/- 14.0
  Background aperture counts = 70.6
  Rate = 0.003 +/- 0.0005

[Tue May 14 10:16:51 2013] Updating counts from extracted products
[Tue May 14 10:16:51 2013] Set source signif. to 97.40/8.40 = 11.59
[Tue May 14 10:16:51 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 10:16:51 2013] Using photon index=1.80, rate=0.00327, arf fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38.arf
[Tue May 14 10:16:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 10:16:52 2013] Updating source flux to 3.3e-14
[Tue May 14 10:16:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 10:16:59 2013] xmm0071340301/analysis//spectral/fullrun_mos2_xmm0071340301_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete