[Tue May 14 00:40:07 2013] Detection parameters:
  Position = (209.9, 162.4) = 12 31 51.97 25 38 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.9 +/- 7.6
  Background counts = 6.2
  Rate = 0.002 +/- 0.0005

[Tue May 14 00:40:08 2013] Off-axis axis estimate = 11.77'
[Tue May 14 02:17:31 2013] Using EEF radius (= 12.31 ")to estimate initial spatial extent for simple fitting
[Tue May 14 02:17:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 02:17:31 2013] Initial guess for spatial extent in simple fitting = 12.31"
[Tue May 14 02:17:31 2013] source mask rpix=2.8, npix_max = 44, mask sum = 39, frac = 0.879
[Tue May 14 02:17:31 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 12.31"
[Tue May 14 03:23:57 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 14 03:23:57 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 14 03:23:57 2013] Fit fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src17 appears to have run properly
[Tue May 14 03:23:58 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 14 03:23:58 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 14 03:23:58 2013] Fit fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue May 14 04:53:02 2013] Spatial fit model total counts = 110.584000, observed total counts = 101.000000
[Tue May 14 04:53:02 2013] Offset between fit and detection position for source 26 = 0.271044 pixels
[Tue May 14 04:53:02 2013] 112.291400 total counts/ 89.292400 bgd. counts: snr = 2.433894
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.271044 pixels
  Position = (210.2, 162.4) = 12 31 51.88 25 38 24.2
  Extent = 5.9 (3.1-10.4)", rotation angle = 0
  Source counts = 23.0 +/- 10.6
  Background counts = 89.3
  Rate = 0.0008 +/- 0.0004
[Tue May 14 04:53:02 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:53:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:53:02 2013] Assessing source extent using major axis lower bound
[Tue May 14 04:53:02 2013] Source does appear to be extended
[Tue May 14 04:53:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 06:06:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 06:06:29 2013] Initial guess for spatial extent in simple fitting = 5.95"
[Tue May 14 06:06:29 2013] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Tue May 14 06:06:29 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 5.95"
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 14 07:00:06 2013] Fit fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src17 appears to have run properly
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 14 07:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 14 07:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue May 14 07:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:59:09 2013] Spatial fit model total counts = 100.711000, observed total counts = 91.000000
[Tue May 14 07:59:09 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 07:59:09 2013] Vigneting correction estimate = 1.000000
[Tue May 14 07:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 07:59:09 2013] Assessing source extent using major axis lower bound
[Tue May 14 07:59:09 2013] Source does appear to be extended
[Tue May 14 07:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 09:18:08 2013] XMMSAS src. selection expression = ellipse(18239.501400, 14082.090100, 356.758810, 356.758810, 0.000000, X, Y)
[Tue May 14 09:18:08 2013] Writing source region out to fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26_src.reg
[Tue May 14 09:18:08 2013] Extracting stamp from image fullrun_mos1_xmm0071340301_pi300-10000_cl_sm2.00.img.gz, (190, 142) - (231, 183)
[Tue May 14 09:18:08 2013] XMMSAS bgd. selection expression = annulus(18239.501400, 14082.090100, 594.598017, 1189.196034, X, Y)
[Tue May 14 09:18:08 2013] Writing fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26.gif
[Tue May 14 09:22:47 2013] Mean detx,y = (4122.30, 11650.84) 
[Tue May 14 09:22:49 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 09:22:59 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 09:22:59 2013] Setting source spectrum file to fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 14 09:22:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 14 09:42:43 2013] Not generating rmf since there are only 22 counts
[Tue May 14 09:42:43 2013] rmf not generated due to insufficient counts
[Tue May 14 10:16:40 2013] Updating aperture counts using extracted products
[Tue May 14 10:16:40 2013] Total counts from fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 37.00
[Tue May 14 10:16:40 2013] Total counts from fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 113.00
[Tue May 14 10:16:40 2013] Got source and background scale factors 363848.000000, 3149512.000000
[Tue May 14 10:16:40 2013] User source parameters:
  Position = (210.2, 162.4) = 12 31 51.88 25 38 24.2
  Extent = 5.9 (3.1-10.4)", rotation angle = 0
  Source aperture counts = 23.9 +/- 7.1
  Background aperture counts = 13.1
  Rate = 0.0008 +/- 0.0002

[Tue May 14 10:16:44 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 10:16:44 2013] Using photon index=1.80, rate=0.000773, arf fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26.arf
[Tue May 14 10:16:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 10:16:44 2013] Updating source flux to 1.7e-14
[Tue May 14 10:16:53 2013] Flag p found in src. 26 procflags, skipping spectral fitting
[Tue May 14 10:16:53 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 10:16:56 2013] xmm0071340301/analysis//spectral/fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete