[Tue May 14 00:40:07 2013] Detection parameters:
  Position = (108.6, 241.2) = 12 32 24.62 25 44 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.5 +/- 9.7
  Background counts = 6.7
  Rate = 0.002 +/- 0.0003

[Tue May 14 00:40:08 2013] Off-axis axis estimate = 14.38'
[Tue May 14 02:17:31 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Tue May 14 02:17:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 02:17:31 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Tue May 14 02:17:31 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Tue May 14 02:17:31 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 13.62"
[Tue May 14 03:23:58 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src24.ximg exists
[Tue May 14 03:23:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src24.csv
[Tue May 14 03:23:58 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src24_1.ximg exists
[Tue May 14 03:23:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src24.csv
[Tue May 14 03:23:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:23:58 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Tue May 14 03:23:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue May 14 03:23:58 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Tue May 14 03:23:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Tue May 14 03:23:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0071340301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 04:53:02 2013] Spatial fit model total counts = 147.257000, observed total counts = 129.000000
[Tue May 14 04:53:02 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 04:53:02 2013] Vigneting correction estimate = 1.000000
[Tue May 14 04:53:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 04:53:02 2013] Assessing source extent using major
[Tue May 14 04:53:02 2013] Source does appear to be extended
[Tue May 14 04:53:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 06:06:30 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Tue May 14 06:06:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 06:06:30 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Tue May 14 06:06:30 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Tue May 14 06:06:30 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 13.62"
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src24.ximg exists
[Tue May 14 07:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src24.csv
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue May 14 07:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src24.csv
[Tue May 14 07:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue May 14 07:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 14 07:00:06 2013] fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue May 14 07:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Tue May 14 07:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0071340301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:59:09 2013] Source 14 is offset by -1.058334 and 3.819984 pixels which is larger than
2 X fitted extent = 2.044460 x 2.044460, not incorporating fit results
[Tue May 14 07:59:09 2013] Spatial fit model total counts = 142.827000, observed total counts = 129.000000
[Tue May 14 07:59:09 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 07:59:09 2013] Vigneting correction estimate = 1.000000
[Tue May 14 07:59:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 07:59:09 2013] Assessing source extent using major
[Tue May 14 07:59:09 2013] Source does appear to be extended
[Tue May 14 07:59:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 09:18:08 2013] XMMSAS src. selection expression = ellipse(9399.152931, 20933.110626, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 09:18:08 2013] Writing source region out to fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14_src.reg
[Tue May 14 09:18:08 2013] Extracting stamp from image fullrun_mos1_xmm0071340301_pi300-10000_cl_sm2.00.img.gz, (71, 204) - (146, 279)
[Tue May 14 09:18:08 2013] XMMSAS bgd. selection expression = annulus(9399.152931, 20933.110626, 1087.500000, 2175.000000, X, Y) && !ellipse(9965.525400, 20066.976200, 660.252819, 270.289608, 77.468100, X, Y)
[Tue May 14 09:18:08 2013] Writing fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14.gif
[Tue May 14 09:24:40 2013] Mean detx,y = (-6498.40, 15061.31) 
[Tue May 14 09:24:41 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 09:25:09 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 09:25:09 2013] Setting source spectrum file to fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue May 14 09:25:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue May 14 09:43:20 2013] Not generating rmf since there are only 50 counts
[Tue May 14 09:43:20 2013] rmf not generated due to insufficient counts
[Tue May 14 10:16:42 2013] Updating aperture counts using extracted products
[Tue May 14 10:16:42 2013] Total counts from fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 86.00
[Tue May 14 10:16:42 2013] Total counts from fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14_bgd.pi.gz = 287.00
[Tue May 14 10:16:42 2013] Got source and background scale factors 1171478.000000, 5938157.000000
[Tue May 14 10:16:42 2013] User source parameters:
  Position = (108.6, 241.2) = 12 32 24.62 25 44 7.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.4 +/- 10.3
  Background aperture counts = 56.6
  Rate = 0.001 +/- 0.0003

[Tue May 14 10:16:42 2013] Updating counts from extracted products
[Tue May 14 10:16:42 2013] Set source signif. to 29.38/7.52 = 3.90
[Tue May 14 10:16:44 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 10:16:44 2013] Using photon index=1.80, rate=0.000987, arf fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14.arf
[Tue May 14 10:16:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 10:16:44 2013] Updating source flux to 2.5e-14
[Tue May 14 10:16:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 10:16:56 2013] xmm0071340301/analysis//spectral/fullrun_mos1_xmm0071340301_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete