[Mon Jun 24 01:31:12 2013] Detection parameters:
  Position = (288.1, 271.0) = 9 53 45.80 1 31 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.9 +/- 20.2
  Background counts = 95.0
  Rate = 0.01 +/- 0.002

[Mon Jun 24 01:31:13 2013] Off-axis axis estimate = 2.12'
[Mon Jun 24 01:34:15 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 01:34:15 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Jun 24 01:34:15 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Mon Jun 24 01:34:15 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.49"
[Mon Jun 24 01:54:05 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 24 01:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_src3.csv
[Mon Jun 24 01:54:05 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 24 01:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_src3.csv
[Mon Jun 24 01:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 01:54:05 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 24 01:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 24 01:54:05 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 24 01:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 24 01:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:48:45 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.369471 pixels away
[Mon Jun 24 02:48:45 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 02:48:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 02:48:45 2013] Assessing source extent using major
[Mon Jun 24 02:48:45 2013] Source does appear to be extended
[Mon Jun 24 02:48:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 02:49:00 2013] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 02:49:00 2013] Initial guess for spatial extent in simple fitting = 7.49"
[Mon Jun 24 02:49:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.810
[Mon Jun 24 02:49:00 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.49"
[Mon Jun 24 03:11:53 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 24 03:11:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_src3.csv
[Mon Jun 24 03:11:53 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 24 03:11:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_src3.csv
[Mon Jun 24 03:11:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 03:11:53 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 24 03:11:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 24 03:11:53 2013] fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 24 03:11:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 24 03:11:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 04:08:40 2013] Source 4 is offset by -6.751173 and 5.904676 pixels which is larger than
2 X fitted extent = 0.860961 x 0.860961, not incorporating fit results
[Mon Jun 24 04:08:40 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 04:08:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 04:08:40 2013] Assessing source extent using major
[Mon Jun 24 04:08:40 2013] Source does appear to be extended
[Mon Jun 24 04:08:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 04:08:51 2013] XMMSAS src. selection expression = ellipse(25019.375946, 23529.978851, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 24 04:08:51 2013] Writing source region out to fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun 24 04:08:51 2013] Extracting stamp from image fullrun_pn_xmm0070940401_pi300-10000_cl_sm2.00.img.gz, (251, 234) - (326, 309)
[Mon Jun 24 04:08:51 2013] XMMSAS bgd. selection expression = annulus(25019.375946, 23529.978851, 1087.500000, 2175.000000, X, Y)
[Mon Jun 24 04:08:51 2013] Writing fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4.gif
[Mon Jun 24 04:10:26 2013] Mean detx,y = (-2741.77, 3478.88) 
[Mon Jun 24 04:10:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 04:10:53 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 04:10:54 2013] Setting source spectrum file to fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun 24 04:10:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun 24 04:13:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 24 04:13:49 2013] rmf not generated due to insufficient counts
[Mon Jun 24 04:38:18 2013] Updating aperture counts using extracted products
[Mon Jun 24 04:38:18 2013] Total counts from fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 96.00
[Mon Jun 24 04:38:18 2013] Total counts from fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 486.00
[Mon Jun 24 04:38:18 2013] Got source and background scale factors 1103884.000000, 9636721.000000
[Mon Jun 24 04:38:18 2013] User source parameters:
  Position = (288.1, 271.0) = 9 53 45.80 1 31 6.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.3 +/- 10.8
  Background aperture counts = 55.7
  Rate = 0.02 +/- 0.004

[Mon Jun 24 04:38:18 2013] Updating counts from extracted products
[Mon Jun 24 04:38:18 2013] Set source signif. to 40.33/7.46 = 5.41
[Mon Jun 24 04:38:20 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 04:38:20 2013] Using photon index=1.80, rate=0.0152, arf fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4.arf
[Mon Jun 24 04:38:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 04:38:20 2013] Updating source flux to 5.6e-14
[Mon Jun 24 04:38:39 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 24 04:38:40 2013] xmm0070940401/analysis//spectral/fullrun_pn_xmm0070940401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete