[Mon Jun 24 01:32:02 2013] Detection parameters:
  Position = (300.2, 376.8) = 9 53 42.29 1 38 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.8 +/- 16.8
  Background counts = 87.5
  Rate = 0.005 +/- 0.0008

[Mon Jun 24 01:32:02 2013] Off-axis axis estimate = 5.69'
[Mon Jun 24 02:20:32 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 02:20:32 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Mon Jun 24 02:20:32 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Mon Jun 24 02:20:32 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.27"
[Mon Jun 24 02:48:41 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 24 02:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_src11.csv
[Mon Jun 24 02:48:41 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 24 02:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_src11.csv
[Mon Jun 24 02:48:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:48:41 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 24 02:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 24 02:48:41 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 24 02:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 24 02:48:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070940401_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 02:48:51 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.230006 pixels away
[Mon Jun 24 02:48:51 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 02:48:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 02:48:51 2013] Assessing source extent using major
[Mon Jun 24 02:48:51 2013] Source does appear to be extended
[Mon Jun 24 02:48:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 24 03:39:03 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 03:39:03 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Mon Jun 24 03:39:03 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.903
[Mon Jun 24 03:39:03 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.27"
[Mon Jun 24 04:08:37 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun 24 04:08:37 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun 24 04:08:37 2013] Fit fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_src11 appears to have run properly
[Mon Jun 24 04:08:37 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun 24 04:08:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 24 04:08:37 2013] fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun 24 04:08:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 24 04:08:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070940401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 24 04:08:44 2013] Spatial fit model total counts = 145.681000, observed total counts = 138.000000
[Mon Jun 24 04:08:44 2013] Offset between fit and detection position for source 5 = 0.546336 pixels
[Mon Jun 24 04:08:44 2013] 147.854000 total counts/ 114.952000 bgd. counts: snr = 3.068768
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.546336 pixels
  Position = (299.8, 377.2) = 9 53 42.40 1 38 47.6
  Extent = 5.2 (2.8-8.6)" x 4.0 (2.7-7.3)", rotation angle = 90 (90-90) degrees
  Source counts = 32.9 +/- 12.2
  Background counts = 115.0
  Rate = 0.002 +/- 0.0009
[Mon Jun 24 04:08:44 2013] Vigneting correction estimate = 1.000000
[Mon Jun 24 04:08:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 24 04:08:44 2013] Assessing source extent using major axis lower bound
[Mon Jun 24 04:08:44 2013] Source does appear to be extended
[Mon Jun 24 04:08:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.38
[Mon Jun 24 04:21:56 2013] XMMSAS src. selection expression = ellipse(26038.340080, 32771.607200, 313.859409, 242.175607, 90.000000, X, Y)
[Mon Jun 24 04:21:56 2013] Writing source region out to fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 24 04:21:56 2013] Extracting stamp from image fullrun_mos2_xmm0070940401_pi300-10000_cl_sm2.00.img.gz, (282, 359) - (318, 395)
[Mon Jun 24 04:21:56 2013] XMMSAS bgd. selection expression = annulus(26038.340080, 32771.607200, 523.099015, 1046.198030, X, Y)
[Mon Jun 24 04:21:56 2013] Writing fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5.gif
[Mon Jun 24 04:25:03 2013] Mean detx,y = (-1100.40, 4998.64) 
[Mon Jun 24 04:25:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 24 04:25:15 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 24 04:25:16 2013] Setting source spectrum file to fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 24 04:25:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 24 04:37:24 2013] Not generating rmf since there are only 32 counts
[Mon Jun 24 04:37:24 2013] rmf not generated due to insufficient counts
[Mon Jun 24 04:38:31 2013] Updating aperture counts using extracted products
[Mon Jun 24 04:38:31 2013] Total counts from fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 47.00
[Mon Jun 24 04:38:31 2013] Total counts from fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 164.00
[Mon Jun 24 04:38:31 2013] Got source and background scale factors 241600.000000, 2280868.000000
[Mon Jun 24 04:38:31 2013] User source parameters:
  Position = (299.8, 377.2) = 9 53 42.40 1 38 47.6
  Extent = 5.2 (2.8-8.6)" x 4.0 (2.7-7.3)", rotation angle = 90 (90-90) degrees
  Source aperture counts = 29.6 +/- 7.9
  Background aperture counts = 17.4
  Rate = 0.002 +/- 0.0006

[Mon Jun 24 04:38:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 24 04:38:32 2013] Using photon index=1.80, rate=0.00238, arf fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5.arf
[Mon Jun 24 04:38:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 24 04:38:32 2013] Updating source flux to 4.3e-14
[Mon Jun 24 04:38:35 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 24 04:38:39 2013] xmm0070940401/analysis//spectral/fullrun_mos2_xmm0070940401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete