[Wed Jul 25 10:14:25 2012] Detection parameters:
  Position = (294.8, 275.1) = 15 4 1.26 10 26 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65625.6 +/- 300.6
  Background counts = 18.5
  Rate = 5 +/- 0.02

[Wed Jul 25 10:14:26 2012] Off-axis axis estimate = 1.71'
[Wed Jul 25 10:57:44 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:57:44 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 25 10:57:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Jul 25 10:57:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jul 25 11:23:13 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 11:23:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 11:23:13 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 11:23:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 11:23:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:23:13 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 11:23:13 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 11:23:13 2012] Fit fullrun_mos2_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 25 11:23:19 2012] Spatial fit model total counts = 56597.500000, observed total counts = 54978.000000
[Wed Jul 25 11:23:19 2012] Offset between fit and detection position for source 1 = 0.119697 pixels
[Wed Jul 25 11:23:19 2012] 56399.300000 total counts/ 12563.500000 bgd. counts: snr = 391.087211
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.119697 pixels
  Position = (294.8, 275.3) = 15 4 1.25 10 26 16.2
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 43835.8 +/- 237.5
  Background counts = 12563.5
  Rate = 3 +/- 0.02
[Wed Jul 25 11:23:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 11:23:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 11:23:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 11:23:19 2012] Source does appear to be extended
[Wed Jul 25 11:23:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:51:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 11:51:27 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Wed Jul 25 11:51:27 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.985
[Wed Jul 25 11:51:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.42"
[Wed Jul 25 12:00:55 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 12:00:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 12:00:55 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 12:00:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 12:00:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 12:00:55 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 12:00:55 2012] fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 12:00:55 2012] Fit fullrun_mos2_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 12:00:59 2012] Spatial fit model total counts = 56037.900000, observed total counts = 54776.000000
[Wed Jul 25 12:00:59 2012] Offset between fit and detection position for source 1 = 0.017604 pixels
[Wed Jul 25 12:00:59 2012] 56181.200000 total counts/ 12400.000000 bgd. counts: snr = 393.166782
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.017604 pixels
  Position = (294.8, 275.2) = 15 4 1.26 10 26 16.2
  Extent = 5.4 (5.4-5.5)", rotation angle = 0
  Source counts = 43781.2 +/- 237.0
  Background counts = 12400.0
  Rate = 3 +/- 0.02
[Wed Jul 25 12:00:59 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 12:00:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 12:00:59 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 12:00:59 2012] Source does appear to be extended
[Wed Jul 25 12:00:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:31:43 2012] Counts = 43781.200000, rescaling region sizes by 3.000000
[Wed Jul 25 12:31:43 2012] XMMSAS src. selection expression = ellipse(25600.289000, 23898.054000, 974.800828, 974.800828, 0.000000, X, Y)
[Wed Jul 25 12:31:43 2012] Writing source region out to fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 25 12:31:43 2012] Extracting stamp from image fullrun_mos2_xmm0070740301_pi300-10000_cl_sm2.00.img.gz, (239, 219) - (351, 331)
[Wed Jul 25 12:31:43 2012] XMMSAS bgd. selection expression = annulus(25600.289000, 23898.054000, 4874.004140, 9748.008280, X, Y) && !ellipse(18575.934464, 28165.070587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24665.569397, 23693.263153, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 12:31:43 2012] Writing fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1.gif
[Wed Jul 25 12:31:49 2012] Mean detx,y = (-3.35, 19.36) 
[Wed Jul 25 12:31:50 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:34:51 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:34:52 2012] Setting source spectrum file to fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 12:34:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul 25 12:41:38 2012] Updating aperture counts using extracted products
[Wed Jul 25 12:41:38 2012] Error reading totcts from fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 25 12:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:41:38 2012] Using photon index=1.80, rate=3.35, arf fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 12:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:41:38 2012] Updating source flux to 3.4e-11
[Wed Jul 25 12:42:02 2012] Reading fit data from xmm0070740301/analysis//spectral/fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul 25 12:42:02 2012] Spectral fit parameter nH value = 1.75121e+12
[Wed Jul 25 12:42:02 2012] Spectral fit parameter PhoIndex value = 2.22977
[Wed Jul 25 12:42:02 2012] Failed to get F(0.3-8.0) from xmm0070740301/analysis//spectral/fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 12:42:02 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:42:02 2012] Using Nh = 1.8e+12, photon index=2.23, rate=3.35, arf fullrun_mos2_xmm0070740301_pi300-10000_pass1_cl_src1.arf
[Wed Jul 25 12:42:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:42:02 2012] Updating source flux to 2.8e-11