[Wed Jul 25 10:14:02 2012] Detection parameters:
  Position = (214.4, 324.1) = 15 4 24.98 10 29 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.5 +/- 23.5
  Background counts = 14.6
  Rate = 0.03 +/- 0.002

[Wed Jul 25 10:14:02 2012] Off-axis axis estimate = 6.37'
[Wed Jul 25 10:40:08 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:40:08 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Wed Jul 25 10:40:08 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.647
[Wed Jul 25 10:40:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.61"
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 10:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 10:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 10:57:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 10:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 10:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 10:57:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:23:17 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 16.390281 pixels away
[Wed Jul 25 11:23:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 11:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 11:23:17 2012] Assessing source extent using major
[Wed Jul 25 11:23:17 2012] Source does appear to be extended
[Wed Jul 25 11:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:38:28 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 11:38:28 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Wed Jul 25 11:38:28 2012] source mask rpix=2.2, npix_max = 29, mask sum = 19, frac = 0.647
[Wed Jul 25 11:38:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.61"
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 11:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 11:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 11:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 11:51:27 2012] Fit fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 25 12:00:58 2012] Spatial fit model total counts = 382.328000, observed total counts = 400.000000
[Wed Jul 25 12:00:58 2012] Offset between fit and detection position for source 8 = 1.164307 pixels
[Wed Jul 25 12:00:58 2012] 365.637726 total counts/ 0.321726 bgd. counts: snr = 644.058942
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.164307 pixels
  Position = (213.9, 323.0) = 15 4 25.13 10 29 44.1
  Extent = 9.1 (9.1-9.1)", rotation angle = 0
  Source counts = 365.3 +/- 19.1
  Background counts = 0.3
  Rate = 0.03 +/- 0.002
[Wed Jul 25 12:00:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 12:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 12:00:58 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 12:00:58 2012] Source does appear to be extended
[Wed Jul 25 12:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:25:35 2012] XMMSAS src. selection expression = ellipse(18558.069880, 28055.899400, 543.294016, 543.294016, 0.000000, X, Y)
[Wed Jul 25 12:25:35 2012] Writing source region out to fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8_src.reg
[Wed Jul 25 12:25:35 2012] Extracting stamp from image fullrun_mos1_xmm0070740301_pi300-10000_cl_sm2.00.img.gz, (183, 292) - (245, 354)
[Wed Jul 25 12:25:35 2012] XMMSAS bgd. selection expression = annulus(18558.069880, 28055.899400, 905.490026, 1810.980052, X, Y)
[Wed Jul 25 12:25:35 2012] Writing fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8.gif
[Wed Jul 25 12:25:38 2012] Mean detx,y = (-6742.41, 4167.71) 
[Wed Jul 25 12:25:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:25:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:25:59 2012] Setting source spectrum file to fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 25 12:25:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jul 25 12:41:38 2012] Updating aperture counts using extracted products
[Wed Jul 25 12:41:38 2012] Error reading totcts from fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 25 12:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:41:38 2012] Using photon index=1.80, rate=0.0293, arf fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8.arf
[Wed Jul 25 12:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:41:38 2012] Updating source flux to 5.5e-13
[Wed Jul 25 12:41:44 2012] Reading fit data from xmm0070740301/analysis//spectral/fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8_pl.csv
[Wed Jul 25 12:41:44 2012] Spectral fit parameter nH value = 1.5983e+20
[Wed Jul 25 12:41:44 2012] Spectral fit parameter PhoIndex value = 1.56377
[Wed Jul 25 12:41:44 2012] Failed to get F(0.3-8.0) from xmm0070740301/analysis//spectral/fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Wed Jul 25 12:41:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:41:44 2012] Using Nh = 1.6e+20, photon index=1.56, rate=0.0293, arf fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src8.arf
[Wed Jul 25 12:41:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:41:44 2012] Updating source flux to 6.4e-13