[Wed Jul 25 10:14:02 2012] Detection parameters:
  Position = (346.0, 161.1) = 15 3 46.17 10 17 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 11.2
  Background counts = 11.7
  Rate = 0.01 +/- 0.002

[Wed Jul 25 10:14:02 2012] Off-axis axis estimate = 10.54'
[Wed Jul 25 10:40:08 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 10:40:08 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Wed Jul 25 10:40:08 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.885
[Wed Jul 25 10:40:08 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.70"
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 25 10:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 25 10:57:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src3.csv
[Wed Jul 25 10:57:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 25 10:57:44 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 25 10:57:44 2012] Fit fullrun_mos1_xmm0070740301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 25 11:23:17 2012] Spatial fit model total counts = 151.336000, observed total counts = 150.000000
[Wed Jul 25 11:23:17 2012] Offset between fit and detection position for source 7 = 0.024130 pixels
[Wed Jul 25 11:23:17 2012] 153.004800 total counts/ 105.440000 bgd. counts: snr = 4.632154
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.024130 pixels
  Position = (346.0, 161.1) = 15 3 46.18 10 17 59.7
  Extent = 5.9 (4.1-7.8)", rotation angle = 0
  Source counts = 47.6 +/- 12.4
  Background counts = 105.4
  Rate = 0.004 +/- 0.001
[Wed Jul 25 11:23:17 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 11:23:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 11:23:17 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 11:23:17 2012] Source does appear to be extended
[Wed Jul 25 11:23:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 11:38:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 11:38:28 2012] Initial guess for spatial extent in simple fitting = 5.94"
[Wed Jul 25 11:38:28 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.149
[Wed Jul 25 11:38:28 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.94"
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 25 11:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src3.csv
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 25 11:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src3.csv
[Wed Jul 25 11:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 25 11:51:27 2012] fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 25 11:51:27 2012] Fit fullrun_mos1_xmm0070740301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 25 12:00:58 2012] Spatial fit model total counts = 140.662000, observed total counts = 140.000000
[Wed Jul 25 12:00:58 2012] Offset between fit and detection position for source 7 = 0.037942 pixels
[Wed Jul 25 12:00:58 2012] 141.859100 total counts/ 95.283700 bgd. counts: snr = 4.771416
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.037942 pixels
  Position = (346.0, 161.1) = 15 3 46.17 10 17 59.7
  Extent = 5.8 (4.0-7.8)", rotation angle = 0
  Source counts = 46.6 +/- 11.9
  Background counts = 95.3
  Rate = 0.004 +/- 0.001
[Wed Jul 25 12:00:58 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 12:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 12:00:58 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 12:00:58 2012] Source does appear to be extended
[Wed Jul 25 12:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 12:25:35 2012] XMMSAS src. selection expression = ellipse(30054.940598, 13967.840000, 349.389010, 349.389010, 0.000000, X, Y)
[Wed Jul 25 12:25:35 2012] Writing source region out to fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 25 12:25:35 2012] Extracting stamp from image fullrun_mos1_xmm0070740301_pi300-10000_cl_sm2.00.img.gz, (326, 141) - (366, 181)
[Wed Jul 25 12:25:35 2012] XMMSAS bgd. selection expression = annulus(30054.940598, 13967.840000, 582.315017, 1164.630034, X, Y)
[Wed Jul 25 12:25:35 2012] Writing fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src7.gif
[Wed Jul 25 12:26:11 2012] Mean detx,y = (11097.30, 482.65) 
[Wed Jul 25 12:26:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 12:26:18 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 12:26:18 2012] Setting source spectrum file to fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 25 12:26:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul 25 12:31:13 2012] Not generating rmf since there are only 46 counts
[Wed Jul 25 12:31:13 2012] rmf not generated due to insufficient counts
[Wed Jul 25 12:41:38 2012] Updating aperture counts using extracted products
[Wed Jul 25 12:41:38 2012] Error reading totcts from fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 25 12:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 12:41:38 2012] Using photon index=1.80, rate=0.00373, arf fullrun_mos1_xmm0070740301_pi300-10000_pass1_cl_src7.arf
[Wed Jul 25 12:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 12:41:38 2012] Updating source flux to 7.8e-14
[Wed Jul 25 12:41:39 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting